Gas cable pipe bend incl. cable adjusting screw and rubber cap suitable for various mopeds, mopeds and small motorcycles with Dell'Orto carburettors.
The gas cable guide pipe has an M6 x 0.75 mm mounting thread.
Other carburetor elbows and throttle cables can be found in the accessories section.
Quality product from the Italian manufacturer Dell'Orto.
Details
| Manufacturer | Dell'Orto |
| Material | Brass |
| Surface | nickel-plated |
| Angle | 90 ° |
| Ø outside | 6 mm |
| Height | 27 mm |
| Total length | 43 mm, 52 mm |
| Internal thread | MF5x0.75 (fine pitch thread) |
| Thread type | MF6x0.75 (fine pitch thread) |
| Width across flats nut | 7 mm |
Suitable for the following models
| Universal | |
| Puch | |
| Sachs | 502 (Saxonette) - AL, AML 50/2 - L CH (0.8 PS), ML CH (0.8 PS), MB (2.6 PS), MLB (2.6 PS) 50/3 50/4 - MLFB (2.6 PS), LKH (4.5 PS) 503 - AAL, ABL, 2AL / 2BL, AB, AC 504 (ohne Tretwelle) 505 (mit Tretwelle) - 1A (AT), 2 A (HG) 508 - 1 A 535 |
| Pony / Cilo (Beta 521 & 512) | Beta 512 Beta diverse Beta 514 Beta 518 Beta 521 (Motor) |
| Zündapp Belmondo | |
| Kreidler | Flory MF |
Accessories & related products
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø Stranded wire: 1.25 mm · Nipple shape: Cylinder · Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Area of application: Standard · Material: Steel · Surface: blue galvanized · Number of components: 1 pcs · Cable length: 2200 mm
3,15 EUR
Dell'Orto 50° Set carburetor pipe bend M6x0.75
Ø outside: 6 mm · Manufacturer: Dell'Orto · Material: Brass · Surface: nickel-plated · Thread type: MF6x0.75 (fine pitch thread) · Height: 40 mm · Height: 48 mm · Total length: 36.5 mm · Total length: 42 mm · Angle: 50 ° · Internal thread: MF5x0.75 (fine pitch thread) · Width across flats nut: 7 mm
13,30 EUR
Nut carburetor pipe bend Dell'Orto SHA carburetor original | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: Piaggio · Material: Steel · Surface: blue galvanized · Nut type: Hexagon nut · Thread type: MF6x0.75 (fine pitch thread) · Height: 3 mm · Drive: External hexagon · Width across flats SW: 8 mm
2,70 EUR
90° carburetor pipe bend M7x0.75
Ø outside: 7 mm · Material: Brass · Carburetor type: 18 Catalyst · Carburetor type: 85 · Thread type: MF7x0.75 (fine pitch thread) · Height: 29 mm · Total length: 47 mm · Total length: 53.5 mm · Angle: 90 ° · Internal thread: MF6x0.75 (fine pitch thread) · Width across flats nut: 8 mm · Width across flats nut: 10 mm · Pony spare part no.: A2066 · Sachs spare part no.: 0261 132 000
13,30 EUR
swiing® revival 90° carburetor pipe bend M6x0.75
Manufacturer: swiing® revival parts · Material: Brass · Surface: nickel-plated · Angle: 90 ° · Total length: 40 mm · Total length: 49 mm · Ø outside: 6 mm · Height: 32 mm · Internal thread: MF5x0.75 (fine pitch thread) · Width across flats nut: 7 mm · Width across flats nut: 8 mm · Thread type: MF6x0.75 (fine pitch thread)
7,70 EUR
Moped fans like you also bought:
BERU spark plug connector / 1 kΩ interference suppressed
Manufacturer: BERU · Material: Sheet metal (steel) · Ø cable: 5 mm · Ø cable: 7 mm · Spark plug socket: M4 · Cable available: No · Suppressed: Yes · Resistance: 1000 Ω · Color: silver · Pony spare part no.: A2099 · Sachs spare part no.: 0265 100 00
9,75 EUR
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø Stranded wire: 1.25 mm · Nipple shape: Cylinder · Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Area of application: Standard · Material: Steel · Surface: blue galvanized · Number of components: 1 pcs · Cable length: 2200 mm
3,15 EUR
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Possible lever positions: open / closed / reserve · Material lever: Metal · Filter type: Plastic net · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Ø fuel hose connection: 6 mm · Reserve level: 70 mm · Mounting type: Union nut · Thread type: MF12x1 (fine pitch thread)
11,10 EUR
Dell'Orto 16/16 SHA carburetor hand choke
Manufacturer: Dell'Orto · Total length: 82 mm · Camouflaged: No · Area of application: Tuning · Material: Aluminum · Width: 72 mm · Carburetor type: SHA (type 4) · Nominal diameter: 16 mm · Ø Internal connection: 19 mm · Ø without reducing sleeve: 21 mm · Ø Inside entrance: 16 mm · Ø Output inside: 16 mm · Color: black · Ø Air filter connection: 56 mm · Ø Air filter connection: 58.5 mm · Mounting type: Plug connection clamped · Ø fuel hose connection: 5.1 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M5 · Nozzle size: 82 · Height: 111 mm
78,10 EUR
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Number of components: 2 pcs · Total length: 6 mm · Ø Cable bushing: 1.6 mm · Ø outside: 5 mm · Screw head: Lens head · Drive: Slot · Thread length: 4 mm · Thread type: M4x0.7 (standard thread)
2,25 EUR
swiing nozzle set M5 (70 - 92) Dell'Orto SHA, PHBG
Manufacturer: swiing · Material: Brass · Quantity: 10 pcs · Carburetor type: PHBG · Carburetor type: SHA (type 3) · Carburetor type: SHA (type 4) · Total length: 8 mm · Nozzle type: Main nozzle · Drive: Slot · Nozzle thread: M5 · Nozzle size: 70 · Nozzle size: 72 · Nozzle size: 75 · Nozzle size: 78 · Nozzle size: 80 · Nozzle size: 82 · Nozzle size: 85 · Nozzle size: 88 · Nozzle size: 90 · Nozzle size: 92
23,40 EUR
Dell'Orto 57° / 70° set carburetor pipe bend M6x0.75
Ø outside: 6 mm · Manufacturer: Dell'Orto · Material: Brass · Surface: nickel-plated · Thread type: MF6x0.75 (fine pitch thread) · Height: 33.5 mm · Height: 37 mm · Height: 37.5 mm · Height: 40 mm · Total length: 31 mm · Total length: 38 mm · Total length: 39 mm · Total length: 46 mm · Angle: 57 ° · Angle: 70 ° · Internal thread: MF5x0.75 (fine pitch thread) · Width across flats nut: 7 mm
15,50 EUR
Dell'Orto 13/11 SHA Spaco carburetor hand choke
Total length: 52 mm · Width: 65 mm · Height: 99 mm · Nominal diameter: 11 mm · Nominal diameter: 13 mm · Manufacturer: Dell'Orto · Material: Aluminum · Camouflaged: No · Area of application: Original · Area of application: Tuning · Color: black · Carburetor type: SHA Spaco · Mounting type: Plug connection clamped · Nozzle thread: M5 · Ø Internal connection: 16 mm · Ø without reducing sleeve: 18 mm · Nozzle size: 48 · Ø Inside entrance: 11 mm · Ø Output inside: 13 mm · Ø Air filter connection: 59 mm · Ø fuel hose connection: 5.2 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke
111,70 EUR
Collection only possible with online purchase and appointment.
