Spacer with the dimensions 16x26x0.20 mm, which is used between the clutches and the clutch basket of mopeds / mopeds with Sachs 502 (Saxonette) AL, AML and 503 AAL, AC & ADV engines.
The shim is hardened, ground and of the highest quality.
This component is also known as a shim washer, bearing washer or thrust washer, depending on the language used.
Further details can be found in the accessories section.
Nostalgic product for the highest demands of the quality brand swiing®.
Details
| Manufacturer | swiing® revival parts |
| Material | Steel |
| Surface | hardened & ground |
| Thickness | 0.2 mm |
| Ø outside | 25.85 mm |
| Ø inside | 15.15 mm |
Suitable for the following models
| Sachs | 502 (Saxonette) - AL, AML 503 - AAL, AC, ADV |
Accessories & related products
swiing® revival gearbox cover gasket | Sachs 503 AAL, ABL, AB, AC, ADV, 2AL, 2BL (A1888)
Manufacturer: swiing® revival parts · Material: Sealing paper · Color: sand-colored · Width: 130 mm · Thickness: 0.35 mm · Number of fixing points: 6 pcs · Total length: 200 mm · Number of components: 1 pcs · Pony spare part no.: A1888 · Sachs spare part no.: 0250 150 000
6,05 EUR
Motorex Brake Cleaner 750 ml
Manufacturer: Motorex · Area of application: Chemistry · Area of application: Cleaner · Contents [ml]: 750 ml · Hazard warning: Causes serious eye irritation · Hazard warning: Extremely flammable aerosol · Hazard warning: May be fatal if swallowed and enters the respiratory tract · Hazard warning: May cause drowsiness and dizziness · Hazard warning: Pressurized container: may burst when heated · Hazard warning: Toxic to aquatic organisms (with long-term effects) · Signal word: Danger · Hazard pictogram: GHS02 - Highly flammable · Hazard pictogram: GHS04 - Gas under pressure · Hazard pictogram: GHS07 - Caution dangerous
27,80 EUR
37,07 EUR/l
swiing® revival shim set | Sachs 503, 502, 50/2, 50/3
Manufacturer: swiing® revival parts · Material: Steel · Surface: blank / oiled · Nominal diameter: 13 mm · Thickness: 0.1 mm · Thickness: 0.15 mm · Thickness: 0.2 mm · Thickness: 0.4 mm · Thickness: 0.45 mm · Thickness: 0.5 mm · Thickness: 1 mm · Ø outside: 18 mm · Ø outside: 21 mm · Ø inside: 12.5 mm · Ø inside: 15.2 mm
18,90 EUR
swiing® revival starter disk small | Sachs 503 AC / ADV (A5498)
Ø inside: 23 mm · Manufacturer: swiing® revival parts · Area of application: Standard · Material: Sheet metal (steel) · Material: Silicon carbide · Surface: raw · Number of jaws: 1 pcs · Ø outside: 55 mm · Ø outside: 59 mm · Thickness: 5.2 mm
44,60 EUR
swiing® revival thrust washer 16/26/0.15 clutch | Sachs 502 AL, AML / 503 AAL, AC, ADV (A1691)
Ø inside: 16.3 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: hardened & ground · Ø outside: 26 mm · Thickness: 0.15 mm · Pony spare part no.: A1691 · Sachs spare part no.: 0246 015 003
8,85 EUR
swiing® revival thrust washer 16/26/0.3 clutch | Sachs 502 AL, AML / 503 AAL, AC, ADV (A1688)
Ø inside: 16.3 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: hardened & ground · Ø outside: 26 mm · Thickness: 0.3 mm · Pony spare part no.: A1688 · Sachs spare part no.: 0246 015 000
8,85 EUR
swiing® revival thrust washer 16/26/0.5 clutch | Sachs 502 AL, AML / 503 AAL, AC, ADV (A1689)
Ø inside: 16.3 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: hardened & ground · Ø outside: 26 mm · Thickness: 0.5 mm · Pony spare part no.: A1689 · Sachs spare part no.: 0246 015 001
8,85 EUR
swiing® revival thrust washer 16/26/1 clutch | Sachs 502 AL, AML / 503 AAL, AC, ADV (A1690)
Ø inside: 16.3 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: hardened & ground · Ø outside: 26 mm · Thickness: 1 mm · Pony spare part no.: A1690 · Sachs spare part no.: 0246 015 002
8,85 EUR
Collection only possible with online purchase and appointment.
