- 30 %
Hot 
12 mm original carburetor suitable for Puch Maxi, Puch X30 Sport NS/NL and Puch X30 Sport NG-2AH as well as other mopeds / mopeds which are originally equipped with a Bing SRE carburetor and have the adjusting screw on the left side of the carburetor (in the direction of travel).
For perfect camouflage, the tuning carburetor is provided with the original number «1/12/197». This means that the carburetor is indistinguishable from the original when fitted.
Installed throttle bodies: 52
Installed throttle body: 2.15 (suitable for M3.5 jets)
Ø connection air filter: 20 mm
Ø connection intake manifold: 20 mm
Maximum tightening torque on the clamping screw: 3-4 Nm
Black-Edition: the carburetor is treated with a heat- & petrol-resistant black coating. Unfortunately, the carburetors have various damaged areas, which have been repaired with a touch-up pen.
You can find suitable jets and an alternative carburetor in the accessories section.
Details
| Area of application | Standard |
| Material | Aluminum |
| Surface | coated |
| Color | black |
| Carburetor type | SRE |
| Nominal diameter | 12 mm |
| Ø Internal connection | 20 mm |
| Ø Inside entrance | 12 mm |
| Ø Output inside | 12 mm |
| Ø Air filter connection | 20 mm |
| Mounting type | Plug connection clamped |
| Mixed oil connection | No |
| Vacuum connection | No |
| Choke control | Hand choke |
| Nozzle thread | M3.5 |
| Nozzle block | 2.15 |
| Nozzle size | 52 |
| Clamping screw torque (max.) | 3 N/m |
Suitable for the following models
| Universal | |
| Puch |
Accessories & related products
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø Stranded wire: 1.25 mm · Nipple shape: Cylinder · Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Area of application: Standard · Material: Steel · Surface: blue galvanized · Number of components: 1 pcs · Cable length: 2200 mm
3,15 EUR
BING rubber grommet Ø 8 mm carburetor pipe bend
Total length: 29 mm · Manufacturer: BING · Ø inside: 8 mm · Ø outside: 12 mm · Material: Rubber · Area of application: Standard · Color: black · Clamping diameter: 4 mm · Alternative version of the Pony Spare part no.: A1930 · Pony spare part no.: A1952 · Alternative version of Sachs spare part no.: 0260 024 001 · Sachs spare part no.: 0260 125 000
4,35 EUR
BING O-ring Bing SRE & 85, Ø 20 mm
Cord thickness: 1.4 mm · Manufacturer: BING · Area of application: Standard · Material: Rubber · Place of use: Carburetor · Surface: raw · Number of components: 1 pcs · Ø inside: 17.2 mm · Ø outside: 20 mm · Color: black · Pony spare part no.: A4281 · Sachs spare part no.: 0250 160 101
3,25 EUR
Hot
swiing® ingenious 15 mm intake manifold camouflaged (Version 2.0) | Puch E50
Manufacturer: swiing® ingenious parts · Area of application: Tuning · Camouflaged: Yes · Material: Aluminum · Ø inside: 15 mm · Ø External connection: 20 mm · Total length: 46 mm · Mounting type: Screws · Total height: 53 mm · Height flange center hole: 43 mm · Number of fixing points: 2 pcs · Hole spacing inlet: 38 mm
39,00 EUR
swiing® revival choke extension Bing carburetor
Ø inside: 3.25 mm · Ø outside: 6 mm · Ø outside: 8 mm · Manufacturer: swiing® revival parts · Material: Plastic · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Carburetor type: SSN · Total length: 50 mm · Choke control: Hand choke
6,60 EUR
swiing nozzle set M3.5 (50 - 60) Bing SRE, SRA, SRC, SRF
Manufacturer: swiing · Total length: 6 mm · Material: Brass · Quantity: 11 pcs · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Nozzle type: Main nozzle · Drive: Slot · Nozzle thread: M3.5 · Nozzle size: 50 · Nozzle size: 51 · Nozzle size: 52 · Nozzle size: 53 · Nozzle size: 54 · Nozzle size: 55 · Nozzle size: 56 · Nozzle size: 57 · Nozzle size: 58 · Nozzle size: 59 · Nozzle size: 60
24,50 EUR
Hot
15 mm carburetor "Black Edition" tuning camouflaged | Puch
Nominal diameter: 15 mm · Material: Aluminum · Area of application: Tuning · Camouflaged: Yes · Color: black · Surface: coated · Carburetor type: SRE · Mounting type: Plug connection clamped · Nozzle thread: M3.5 · Ø Internal connection: 20 mm · Nozzle size: 62 · Ø Inside entrance: 15 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle block: 2.17 · Clamping screw torque (max.): 3 N/m
72,50 EUR
Not in stock
Moped fans like you also bought:
BERU spark plug connector / 1 kΩ interference suppressed
Manufacturer: BERU · Material: Sheet metal (steel) · Spark plug socket: M4 · Cable available: No · Suppressed: Yes · Resistance: 1000 Ω · Ø cable: 5 mm · Ø cable: 7 mm · Color: silver · Pony spare part no.: A2099 · Sachs spare part no.: 0265 100 00
9,75 EUR
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø Stranded wire: 1.25 mm · Nipple shape: Cylinder · Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Area of application: Standard · Material: Steel · Surface: blue galvanized · Number of components: 1 pcs · Cable length: 2200 mm
3,15 EUR
swiing® revival side protection screw set black | Puch Maxi S
Thread type: M5x0.8 (standard thread) · Manufacturer: swiing® revival parts · Material: Plastic · Material: Steel · Surface: blue galvanized · Surface: raw · Drive: Slot · Drive: Triangular head · Thread length: 35 mm · Thread length: 50 mm · Color: silver · Total length: 47 mm · Total length: 60 mm
14,40 EUR
swiing® revival 12 mm intake manifold | Puch E50
Manufacturer: swiing® revival parts · Camouflaged: No · Area of application: Original · Material: Aluminum · Ø inside: 12 mm · Ø External connection: 20 mm · Total length: 45.5 mm · Mounting type: Screws · Total height: 53 mm · Height flange center hole: 43 mm · Number of fixing points: 2 pcs · Hole spacing inlet: 38 mm
39,00 EUR
Collection only possible with online purchase and appointment.
