Interchangeable number holder for your moped, moped and small motorcycle.
Everyone who owns more than one moped and doesn't ride around on two at the same time like Jean-Claude Van Damme should definitely get this practical interchangeable number holder.
This allows you to change the same number from one moped to the next in a matter of seconds. This saves time and money.
The number holder system impresses with its sophisticated yet simple functionality.
The spring plate is either attached directly to the license plate with the M5 cam, or to a license plate frame as listed in the accessories.
The black anodized aluminium block with the corresponding recesses is mounted directly on the moped frame.
With light pressure and a little momentum, the number is pushed smoothly into the locking position. This is bombproof - even in snow, rain and strong winds.
Scope of delivery as shown in Figure 1.
Figures 3 & 4 illustrate the mounted number holder.
This table gives you an overview of how many mopeds can be mounted on a license plate in the relevant cantons of Switzerland and Liechtenstein.
| Aargau | 19 |
| Appenzell A.-Rh. | 1 |
| Appenzell I.-Rh. | 5 |
| Basel-Landschaft | 99 |
| Basel-City | 99 |
| Bern | unlimited |
| Freiburg | unlimited |
| Genève | 2 |
| Glarus | 1 |
| Graubünden | unlimited |
| Jura | unlimited |
| Liechtenstein | 2 |
| Lucerne | 99 |
| Neuchâtel | 2 |
| Nidwalden | 30 |
| Obwalden | 30 |
| Schaffhausen | 50 |
| Schwyz | unlimited |
| Solothurn | unlimited |
| St. Gallen | unlimited |
| Ticino | unlimited |
| Thurgau | unlimited |
| Uri | 1 |
| Waadt | 2 |
| Wallis | unlimited |
| Zug | 19 |
| Zürich | 19 |
Excellent quality from the premium custom brand 66HEROES.
The following video explains the details and installation of the replacement number holder in detail:
Details
| Spring design | Leaf spring |
| Manufacturer | 66HEROES |
| Material | Spring steel |
Suitable for the following models
| Universal | |
| Puch | |
| Sachs | |
| Pony / Cilo (Beta 521 & 512) | Beta 512 Beta diverse Beta 521 (Motor) |
| Piaggio | Ciao Si Bravo/Superbravo Boxer Grillo |
| Zündapp Belmondo | |
| Solex | |
| Tomos | |
| Bye Bike | |
| Alpa Chopper / Turbo |
| Cilo | |
| DKW | |
| Fantic | Issimo |
| Garelli | |
| Honda | |
| Hercules | |
| ILO / JLO | |
| Kreidler | Flory MF Florett |
| Malaguti | |
| MBK | |
| Miele | |
| Motobecane | |
| Monark | |
| Peugeot | |
| Victoria | |
| Yamaha | |
| Zündapp |
Accessories & related products
GPO license plate holder Inox
Manufacturer: GPO · Material: Chrome steel (stainless steel) · Total length: 145 mm · Color: silver · Height: 5.3 mm · Width: 105 mm · Thread length: 8 mm · Thread type: M5x0.8 (standard thread) · Mounting type: Nuts & bolts · Hole spacing: 30 mm · Hole spacing: 50 mm · Number of fixing points: 2 pcs · Ø mounting hole: 5 mm
12,70 EUR
Loctite 243 medium-strength threadlocker 10 ml
Temperature resistance (min.): -75 - 200 °C · Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Color: blue · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Contents [ml]: 10 ml · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Area of application: Chemistry · Adhesion: medium strength · Gap dimension (max.): 0.01 mm · Type of application: 1K · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
25,50 EUR
2.550,00 EUR/l
66HEROES interchangeable number holder set
Manufacturer: 66HEROES · Material: Aluminum · Material: Spring steel · Surface: brushed · Surface: electropolished · Color: black · Thread type: M5x0.8 (standard thread) · Mounting type: Bayonet lock · Mounting type: Nuts & bolts · Number of fixing points: 2 pcs
34,80 EUR
Not in stock
GPO license plate holder Inox black
Manufacturer: GPO · Material: Chrome steel (stainless steel) · Surface: varnished · Color: black-matt · Total length: 147 mm · Width: 105 mm · Height: 6 mm · Thread type: M5x0.8 (standard thread) · Mounting type: Nuts & bolts · Number of fixing points: 6 pcs · Ø mounting hole: 5 mm
15,00 EUR
Moped fans like you also bought:
GPO license plate holder Inox
Manufacturer: GPO · Material: Chrome steel (stainless steel) · Total length: 145 mm · Color: silver · Height: 5.3 mm · Width: 105 mm · Thread length: 8 mm · Thread type: M5x0.8 (standard thread) · Mounting type: Nuts & bolts · Hole spacing: 30 mm · Hole spacing: 50 mm · Number of fixing points: 2 pcs · Ø mounting hole: 5 mm
12,70 EUR
Bumm mirror round Inox
Manufacturer: Bumm · Material: Chrome steel (stainless steel) · Material: Steel · Surface: chrome-plated · Color: Chrome · Ø mirror surface: 107 mm · Ø mirror rod: 8 mm · Mirror rod length: 300 mm · Clamping diameter: 22 mm · Total length: 360 mm · Thread type: M8x1.25 (standard thread) · Thread size: M8
28,90 EUR
Hot 
Leonelli 12V voltage regulator (1A quality)
Manufacturer: Leonelli · Material: Aluminum · Material: Plastic · Surface: galvanized (blue) · Tension: 12 V · Type of current: Alternating current (AC) · Performance: 100 W · Total length: 50 mm · Width: 27 mm · Height: 15 mm · Mounting type: Screws · Ø mounting hole: 6 mm
40,60 EUR
66HEROES interchangeable number holder set
Manufacturer: 66HEROES · Material: Aluminum · Material: Spring steel · Surface: brushed · Surface: electropolished · Color: black · Thread type: M5x0.8 (standard thread) · Mounting type: Bayonet lock · Mounting type: Nuts & bolts · Number of fixing points: 2 pcs
34,80 EUR
Not in stock
Collection only possible with online purchase and appointment.
