Cylinder head gasket of the brand Athena suitable for Kreidler 50 cc MF2 & MP2 engines, which were installed on your Kreidler moped, moped and small motorcycle.
The cylinder cover gasket has the following features:
Thickness: 0.4 mm
Hole pattern: 54 x 40 mm
Ø inside: 42 mm
Material: aluminum
You can find complete gaskets and sealant in the accessories section.
Quality product from the Italian manufacturer Athena.
Details
| Manufacturer | Athena |
| Material | Aluminum |
| Number of components | 1 pcs |
| Ø cylinder | 42 mm |
| Thickness | 0.4 mm |
| Hole pattern [mm] | 54 x 40 mm |
Suitable for the following models
| Kreidler |
Accessories & related products
Elring Dirko HT sealing compound gray (silicone) 70 ml permanently elastic up to 315°C
Temperature resistance (min.): -60 - 315 °C · Manufacturer: Elring · Material: Silicone · Color: gray · Contents [ml]: 70 ml · Hazard warning: Causes damage to organs through prolonged or repeated exposure · Area of application: Chemistry · Gap dimension (max.): 2 mm
23,10 EUR
330,00 EUR/l
Dirko Dichtmasse rot (Silikon) Hochtemperatur 70 ml dauerelastisc
Temperature resistance (min.): -60 - 300 °C · Manufacturer: Elring · Color: red · Contents [ml]: 70 ml · Hazard warning: Causes serious eye irritation · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Area of application: Chemistry · Gap dimension (max.): 2 mm
26,50 EUR
378,57 EUR/l
Moped fans like you also bought:
swiing® revival Bing float needle (with penetration) SRE, SRC, SRF, SRA, 85, 18
Manufacturer: swiing® revival parts · Material: Aluminum · Material: Rubber · Component group Carburetor: Adjusting screws, float, etc. · Color: black · Surface: blank · Color: silver · Width: 3.3 mm · Ø outside: 2.6 mm · Ø outside: 4 mm · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Total length: 12 mm · Carburetor type: 18 Catalyst · Carburetor type: 85 · Alternative version of the Pony OEM number: A4595A · Alternative version of the Sachs OEM number: Bing 47-032
8,00 EUR
swiing® revival spring gas slide Bing SRE & SRF
Spring design: Pressure spring · Manufacturer: swiing® revival parts · Ø outside: 13.5 mm · Carburetor type: SRE · Carburetor type: SRF · Total length: 50 mm · Alternative version of the Pony OEM number: A4602 · Alternative version of the Sachs OEM number: 0963 000 000
3,35 EUR
GPO gasket set carburetor Bing SRE
Manufacturer: GPO · Material: Sealing paper · Component group Carburetor: Sealing, revising · Ø outside: 12.2 mm · Ø outside: 45 mm · Ø inside: 7.8 mm · Ø inside: 41 mm · Carburetor type: SRE · Thickness: 0.5 mm · Thickness: 0.9 mm · Thickness: 1.5 mm · Camouflaged: No
5,70 EUR
ESJOT sprocket 45 teeth galvanized | Puch Maxi, X30 NG-2AH
Manufacturer: ESJOT · Material: Steel · Surface: galvanized (blue) · Color: silver · Ø inside: 94 mm · Chain type: 415H · Chain pitch: 1/2" x 3/16" · Number of teeth: 45 pcs · Thickness: 4.1 mm · Hole spacing: 36.5 mm · Hole spacing 2: 68 mm · Cranking (offset): 8 mm · Number of fixing points: 6 pcs · Ø bolt circle: 106 mm · Ø mounting hole: 6.7 mm
40,50 EUR
swiing® revival float needle | Bing SRE, SRA & 85
Manufacturer: swiing® revival parts · Component group Carburetor: Adjusting screws, float, etc. · Material: Brass · Surface: nickel-plated · Color: silver · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRE · Carburetor type: 85 · Total length: 10.3 mm · Thickness: 3.15 mm · Ø outside: 4 mm
11,50 EUR
Collection only possible with online purchase and appointment.
