Membrane system

swiing® ingenious 15 mm intake manifold long version | Sachs 503 2AL, 2BL

Total height: 80 mm · Manufacturer: swiing® ingenious parts · Ø inside: 15 mm · Material: Aluminum · Camouflaged: No · Area of application: Tuning · Total length: 70 mm · Mounting type: Screws · Thread type: M6x1 (standard thread) · Hole spacing inlet: 32 mm · Number of fixing points: 2 pcs · Height flange center hole: 70 mm · Ø External connection: 20 mm · Pony spare part no.: A2176

Dell'Orto reducing bush 26 / 24 mm PHBG 15 - 21 mm

Manufacturer: Dell'Orto · Material: Plastic · Carburetor type: PHBG · Total length: 16 mm · Ø inside: 24 mm · Ø Passage: 20 mm · Ø outside: 26 mm · Color: white

Dell'Orto reducing bush SHA 12mm (16/18 mm)

Manufacturer: Dell'Orto · Material: Plastic · Carburetor type: SHA (type 3) · Carburetor type: SHA Spaco · Total length: 14 mm · Ø inside: 16 mm · Ø Passage: 12 mm · Ø outside: 18 mm · Color: white · Piaggio spare part no.: 114482

Dell'Orto reducing bush SHA 13 mm (16/18mm)

Manufacturer: Dell'Orto · Material: Plastic · Carburetor type: SHA (type 3) · Total length: 14 mm · Ø inside: 16 mm · Ø Passage: 13.3 mm · Ø outside: 18 mm · Color: white

swiing® ingenious reduction sleeve air filter 15 mm carburetor (23/20 mm) | Puch X30 Velux

Manufacturer: swiing® ingenious parts · Material: Polyamide (PA) · Total length: 15 mm · Ø inside: 20 mm · Ø outside: 23 mm · Color: white

Dell'Orto SHA reducing bushing (16/19 mm)

Manufacturer: Dell'Orto · Material: Plastic · Carburetor type: SHA (type 3) · Ø inside: 16 mm · Ø outside: 19 mm · Color: white

BAD ASS intake manifold 17 mm SRF short version | Sachs 503 2AL, 2BL

Thread type: M6x1 (standard thread) · Manufacturer: BAD ASS · Camouflaged: No · Area of application: Tuning · Material: Aluminum · Ø inside: 17 mm · Ø External connection: 23 mm · Total length: 54 mm · Mounting type: Screws · Total height: 56.5 mm · Height flange center hole: 45 mm · Number of fixing points: 3 pcs · Hole spacing inlet: 32 mm

Inlet seal Sachs 50/3 for 17 mm connection piece (5.5 mm)

Hole spacing inlet: 30 mm · Thickness: 5.5 mm · Place of use: Admission

Dell'Orto reducing bush 26 / 23 mm PHBG 15 - 21 mm

Manufacturer: Dell'Orto · Material: Plastic · Carburetor type: PHBG · Total length: 16 mm · Ø inside: 23 mm · Ø Passage: 21 mm · Ø outside: 26 mm · Color: white

BAD ASS 17 mm intake manifold (short) Bing SRE | Sachs 503 2AL/2BL

Manufacturer: BAD ASS · Camouflaged: No · Area of application: Tuning · Material: Aluminum · Ø inside: 17.8 mm · Ø External connection: 20 mm · Number of fixing points: 2 pcs · Total length: 65 mm · Total height: 55 mm · Height flange center hole: 45 mm · Mounting type: Stud bolt · Hole spacing inlet: 32 mm

Dell'Orto SHA reducing bush (18/16 mm)

Manufacturer: Dell'Orto · Material: Plastic · Ø inside: 16 mm · Ø outside: 18 mm · Carburetor type: SHA (type 3) · Carburetor type: SHA Spaco · Total length: 14 mm · Color: white

Dell'Orto SHA reducing bushing (21/18 mm)

Ø inside: 18 mm · Ø outside: 21 mm · Manufacturer: Dell'Orto · Material: Plastic · Color: white · Carburetor type: SHA (type 4) · Total length: 14 mm

AKOA intake manifold 15 mm SRE | Sachs 503 AB, ADV (A5669, A2180)

Manufacturer: AKOA · Material: Aluminum · Ø inside: 15 mm · Ø External connection: 20 mm · Mounting type: Screws · Hole spacing inlet: 36 mm · Alternative version of the Pony Spare part no.: A2180 · Alternative version of the Pony Spare part no.: A5669

swiing® ingenious 15mm tuning set carburetor HG long | Sachs 503

Manufacturer: swiing · Camouflaged: No · Color: black · Carburetor type: SRE · Nominal diameter: 15 mm · Ø Internal connection: 20 mm · Ø Inside entrance: 15 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M3.5 · Nozzle block: 2.17 · Nozzle size: 62 · Mounting type: Flange · Mounting type: Plug connection clamped · Hole spacing inlet: 32 mm · Clamping screw torque (max.): 4 N/m · Total length: 66 mm · Total length: 165 mm · Width: 50 mm · Width: 68 mm · Height: 52 mm · Height: 95 mm · Area of application: Tuning

Jasil intake rubber Ø 24 / 24 mm (PHBG DS)

Manufacturer: Jasil · Material: Rubber · Ø inside: 24 mm · Ø inside 2: 24 mm · Total length: 37 mm · Ø Passage: 20 mm · Ø outside: 35 mm · Ø External connection: 34 mm · Ø Connection 2 external: 34 mm · Color: black

swiing® ingenious intermediate flange 17 mm diaphragm | Sachs 502, 50/2, 50/3, 50/4

Ø inside: 17 mm · Manufacturer: swiing® ingenious parts · Hole spacing: 31 mm · Hole spacing: 67 mm · Material: Aluminum · Material: Steel · Area of application: Tuning · Surface: anodized · Surface: blue galvanized · Mounting type: Screws · Number of flaps: 2 pcs · Width: 80 mm · Thread type: M5x0.8 (standard thread) · Total length: 29 mm · Thickness: 6.9 mm · Number of fixing points: 4 pcs

Dell'Orto SHA reduction sleeve (19/21mm)

Ø inside: 19 mm · Ø outside: 21 mm · Manufacturer: Dell'Orto · Material: Plastic · Color: white · Carburetor type: SHA (type 4)

Dell'Orto SHA 14B reduction rifle (18/20 mm)

Ø inside: 18 mm · Ø outside: 20 mm · Manufacturer: Dell'Orto · Material: Plastic · Color: white · Total length: 14 mm

Dell'Orto reduction rifle SHA (21/19-17.7 mm)

Ø inside: 19 mm · Ø outside: 21 mm · Manufacturer: Dell'Orto · Material: Plastic · Color: white · Carburetor type: SHA (type 4) · Total length: 14 mm · Ø Passage: 17.7 mm

Dell'Orto SHA reducing bushing (16/20 mm)

Manufacturer: Dell'Orto · Material: Plastic · Carburetor type: SHA (type 4) · Ø inside: 16 mm · Ø outside: 20 mm · Color: white

swiing® revival reducing bush 20 / 19 mm

Ø inside: 19 mm · Ø outside: 20 mm · Manufacturer: swiing® revival parts · Material: Plastic · Color: black · Total length: 14 mm

Dell'Orto SHA reducing bushing (19/21 mm)

Ø inside: 19 mm · Ø outside: 21 mm · Manufacturer: Dell'Orto · Material: Plastic · Color: white · Carburetor type: SHA (type 4) · Total length: 14 mm · Ø Passage: 15 mm

Dell'Orto SHA 14C reduction rifle (18/21 mm)

Ø inside: 18 mm · Ø outside: 21 mm · Manufacturer: Dell'Orto · Material: Plastic · Color: white · Carburetor type: SHA (type 4) · Total length: 11.4 mm

Intake rubber Ø 24 / 24 mm

Material: Rubber · Ø inside: 24 mm · Ø inside 2: 24 mm · Total length: 30 mm · Ø Passage: 20 mm · Ø outside: 35 mm · Ø External connection: 33 mm · Ø Connection 2 external: 33 mm · Color: black

Polini lung aluminum

Total height: 40 mm · Manufacturer: Polini · Material: Aluminum · Area of application: Tuning · Total length: 105 mm · Mounting type: Cable ties

DMP clamp for intake manifold Dell'Orto PHBG

Manufacturer: DMP · Material: Rubber · Total length: 32 mm · Ø inside: 34 mm · Mounting type: Plug connection clamped

Stage6 lung aluminum

Ø inside: 4 mm · Total height: 40 mm · Manufacturer: Stage6 · Material: Aluminum · Camouflaged: No · Area of application: Tuning · Color: Chrome · Surface: chrome-plated · Total length: 105 mm · Total length: 125 mm · Mounting type: Cable ties · Ø External connection: 6 mm

AKOA intake manifold 20 mm PHBG / CP | Sachs 503 AB, ADV (A5669, A2180)

Manufacturer: AKOA · Ø inside: 20 mm · Material: Aluminum · Mounting type: Screws · Hole spacing inlet: 36 mm · Ø External connection: 24 mm · Alternative version of the Pony Spare part no.: A2180 · Alternative version of the Pony Spare part no.: A5669

AKOA intake manifold 13 mm SRE | Sachs 503 AB, ADV (A5669, A2180)

Manufacturer: AKOA · Ø inside: 13 mm · Material: Aluminum · Mounting type: Screws · Hole spacing inlet: 36 mm · Ø External connection: 20 mm · Pony spare part no.: A2180 · Pony spare part no.: A5669

Intake manifold 15 mm short | Sachs 503 2AL, 2BL

Ø inside: 15 mm · Material: Aluminum · Area of application: Tuning · Total length: 50 mm · Mounting type: Screws · Thread type: M6x1 (standard thread) · Hole spacing inlet: 32 mm · Number of fixing points: 2 pcs · Ø External connection: 20 mm · Sachs spare part no.: A2177

Polini intake rubber Ø 28.5 / 28.5 mm

Manufacturer: Polini · Material: Rubber · Ø inside: 28.5 mm · Ø inside 2: 28.5 mm · Total length: 37 mm · Ø Passage: 26 mm · Ø outside: 38 mm · Ø External connection: 37 mm · Ø Connection 2 external: 37 mm · Clamping diameter: 27 mm · Color: black

Polini intake rubber Ø 28.5 / 25 mm (PHBG, Polini CP)

Manufacturer: Polini · Material: Rubber · Ø inside 2: 25 mm · Ø inside: 28.5 mm · Total length: 37.5 mm · Ø Passage: 25 mm · Ø outside: 38.5 mm · Ø External connection: 37 mm · Ø Connection 2 external: 37 mm · Clamping diameter: 26.5 mm · Color: black

Polini intake rubber Ø 36 / 36 mm

Manufacturer: Polini · Material: Rubber · Color: black · Clamping diameter: 33.5 mm · Total length: 31 mm · Ø inside: 36 mm · Ø inside 2: 36 mm · Ø outside: 47 mm · Ø Passage: 28 mm

Polini intake rubber Ø 34 / 34 mm

Manufacturer: Polini · Material: Rubber · Color: black · Ø inside: 34.5 mm · Ø inside 2: 34.5 mm · Ø Passage: 28 mm · Ø External connection: 42 mm · Ø Connection 2 external: 42 mm · Ø outside: 44 mm · Total length: 33 mm · Clamping diameter: 34 mm

Intermediate flange diaphragm 12 mm | Sachs 502, 50/2, 50/3, 50/4 (A2621)

Ø inside: 12 mm · Hole spacing: 31 mm · Hole spacing: 67 mm · Material: Aluminum · Area of application: Standard · Mounting type: Screws · Number of flaps: 2 pcs · Thread type: M5x0.8 (standard thread) · Number of fixing points: 4 pcs · Pony spare part no.: A2621 · Sachs spare part no.: 0286 210 001

swiing® ingenious 16 mm intake manifold Dell'Orto SHA | Sachs 50/2, 50/3, 50/4

Ø inside: 16 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Area of application: Tuning · Surface: anodized · Color: graphite colors · Mounting type: Screws · Hole spacing inlet: 31 mm · Number of fixing points: 2 pcs · Ø External connection: 19 mm

swiing® ingenious reducing bush 23 / 26 mm Dell'Orto PHBG

Manufacturer: swiing® ingenious parts · Total length: 16 mm · Material: Plastic · Ø inside: 23 mm · Ø Passage: 19 mm · Ø outside: 26 mm · Color: black

Intake rubber Ø 19 / 14.5 mm | Zündapp

Material: Rubber · Ø inside: 14.5 mm · Ø inside 2: 19 mm · Total length: 47 mm · Ø Passage: 12 mm · Ø outside: 29 mm · Ø External connection: 27 mm · Ø Connection 2 external: 27 mm · Color: black

Flange intake manifold angled with stud bolt | Puch MS, VS, MV and DS

Ø inside: 15 mm · Total height: 2.7 mm · Total height: 9.7 mm · Material: Aluminum · Area of application: Tuning · Mounting type: Stud bolts & nuts · Thread type: M6x1 (standard thread) · Hole spacing inlet: 32 mm · Number of fixing points: 2 pcs

Sachs 503 ADV intake manifold (A2180)

Ø inside: 13 mm · Manufacturer: Sachs · Material: Aluminum · Area of application: Original · Mounting type: Screws · Number of fixing points: 2 pcs · Ø External connection: 23 mm

GPO intake manifold 13 mm | Sachs 504, 505

Total height: 70 mm · Manufacturer: GPO · Material: Aluminum · Area of application: Tuning · Mounting type: Stud bolts & nuts · Hole spacing inlet: 32 mm · Ø inside: 13 mm · Number of fixing points: 2 pcs · Height flange center hole: 60 mm · Ø External connection: 20 mm

Flange intake manifold CNC Sachs 504 / 505

Total height: 12.8 mm · Material: Aluminum · Area of application: Tuning · Mounting type: Screws · Hole spacing inlet: 30 mm · Number of fixing points: 2 pcs · Hole pattern [mm]: 23 x 11

Flange aluminum intake manifold angled

Ø inside: 15 mm · Total height: 2.7 mm · Total height: 9.7 mm · Material: Aluminum · Area of application: Tuning · Mounting type: Screws · Hole spacing inlet: 32 mm · Number of fixing points: 2 pcs

swiing® ingenious intermediate flange 12 mm diaphragm | Sachs 502, 50/2, 50/3, 50/4

Ø inside: 12 mm · Manufacturer: swiing® ingenious parts · Hole spacing: 31 mm · Hole spacing: 67 mm · Material: Aluminum · Area of application: Standard · Surface: anodized · Mounting type: Screws · Number of flaps: 2 pcs · Thread type: M5x0.8 (standard thread) · Number of fixing points: 4 pcs

Siggnature flange Ø 30 mm for Stage6 RT-PWK carburetor

Ø inside: 30 mm · Manufacturer: Siggnature · Hole spacing: 60 mm · Surface: raw · Height: 5 mm · Number of fixing points: 2 pcs · Ø mounting hole: 5.1 mm

Athena intake manifold 15mm straight Sachs 504, 505

Ø inside: 15 mm · Manufacturer: Athena · Material: Aluminum · Area of application: Tuning · Mounting type: Screws · Number of fixing points: 2 pcs · Ø External connection: 20 mm

Stage6 adapter intake manifold PWK carburetor 19 - 28 mm

Manufacturer: Stage6 · Ø inside: 30 mm · Ø inside: 33 mm · Material: Rubber · Hole spacing inlet: 60 mm

swiing® ingenious 15 mm intake manifold & air filter | Sachs 50/2, 50/3, 50/4

Manufacturer: swiing® ingenious parts · Area of application: Tuning · Material: Aluminum · Surface: anodized · Color: black-matt · Ø inside: 15 mm · Ø External connection: 20 mm · Number of fixing points: 2 pcs · Mounting type: Screws · Hole spacing inlet: 31 mm

swiing® ingenious 15 mm Bing SRE carburetor set | Sachs 50/2, 50/3, 50/4

Manufacturer: swiing® ingenious parts · Area of application: Tuning · Carburetor type: SRE · Nominal diameter: 15 mm · Ø Internal connection: 20 mm · Ø Inside entrance: 15 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Ø Air filter connection: 52 mm · Ø fuel hose connection: 6 mm · Mounting type: Flange · Mounting type: Plug connection clamped · Choke control: Hand choke · Nozzle thread: M3.5 · Hole spacing inlet: 31 mm · Clamping screw torque (max.): 4 N/m

Intake rubber Ø 25 / 25 mm

Manufacturer: Made in Germany · Material: Rubber · Ø inside: 25 mm · Ø inside 2: 25 mm · Total length: 50 mm · Ø Passage: 22 mm · Ø outside: 36 mm · Ø External connection: 34 mm · Ø Connection 2 external: 34 mm

Stage6 adapter intake manifold PWK carburetor from 30 mm

Manufacturer: Stage6 · Material: Rubber · Ø inside: 35 mm · Ø inside: 40 mm · Hole spacing inlet: 60 mm

Airsal 14 mm intake manifold angled | Sachs 504, 505

Ø inside: 13.6 mm · Manufacturer: Airsal · Material: Aluminum · Area of application: Tuning · Mounting type: Screws · Hole spacing inlet: 31 mm · Height flange center hole: 56 mm · Number of fixing points: 2 pcs · Ø External connection: 20 mm

Athena intake manifold 15mm aluminum angled | Sachs 504, 505

Ø inside: 14.3 mm · Manufacturer: Athena · Material: Aluminum · Area of application: Tuning · Mounting type: Screws · Number of fixing points: 2 pcs · Ø External connection: 20 mm

Athena intake manifold 18 mm | Puch / Sachs

Ø inside: 18 mm · Manufacturer: Athena · Material: Aluminum · Area of application: Tuning · Mounting type: Screws · Number of fixing points: 4 pcs · Ø External connection: 24 mm

Sachs 535 intake manifold (A4462)

Ø inside: 12 mm · Manufacturer: Sachs · Material: Aluminum · Area of application: Original · Mounting type: Screws · Thread type: M6x1 (standard thread) · Number of fixing points: 2 pcs · Ø External connection: 20 mm

Set of carburetor flange 6 pcs.

Ø inside: 28 mm · Ø inside: 35 mm · Ø inside: 42 mm · Ø inside: 45 mm · Ø inside: 50 mm · Ø inside: 55 mm · Ø outside: 34 mm · Ø outside: 55 mm · Ø outside: 65 mm · Material: Rubber · Color: black

Intake manifold 14 mm aluminum angled | Sachs 504, 505

Total height: 76 mm · Material: Aluminum · Area of application: Tuning · Total length: 80 mm · Mounting type: Stud bolts & nuts · Thread type: M6x1 (standard thread) · Hole spacing inlet: 32 mm · Ø inside: 14 mm · Number of fixing points: 2 pcs · Height flange center hole: 65 mm · Ø External connection: 20 mm

Stage6 adapter intake manifold Mikuni carburetor 24 mm

Manufacturer: Stage6 · Ø inside: 24 mm · Material: Rubber · Hole spacing inlet: 60 mm

Polini intake rubber Ø 45 / 45 mm

Manufacturer: Polini · Material: Rubber · Total length: 33 mm · Ø inside: 45 mm · Ø inside 2: 45 mm · Ø Passage: 37 mm · Ø outside: 60 mm · Ø External connection: 58 mm · Ø Connection 2 external: 58 mm · Clamping diameter: 42 mm · Color: black

Stage6 adapter intake manifold Dell'Orto / Polini CP carburetor 21 mm

Manufacturer: Stage6 · Ø inside: 21 mm · Material: Rubber · Hole spacing inlet: 60 mm