Socket axle M11x200 made of galvanized steel for your moped, moped and small motorcycle.
The axle can be used for both front wheels (shortened) and rear wheels.
The complete rear axle set is also equipped with the following parts:
Other threaded shafts and individual parts of this set can be found in the accessories section.
Made by the Italian brand CIF.
Details
Manufacturer | CIF |
Material | Steel |
Surface | galvanized (blue) |
Total length | 200 mm |
Ø ball [inch] / [mm] | 1/4" (6.35 mm) |
Thread type | MF11x1 (fine pitch thread) |
Height | 10 mm, 4 mm, 2 mm |
Ø shaft | 10.3 mm |
Shank length | 14.5 mm |
Thread length | 92 mm |
Ball bearing closed | No |
Width across flats SW | 17 mm, 15 mm |
Suitable for the following models
Puch | |
Sachs |
Accessories & related products
Wheel axle set M12x1 x 165 mm front
Manufacturer: Quenching · Material: Steel · Surface: burnished · Surface: galvanized (blue) · Thread type: MF12x1 (fine pitch thread) · Ø inside: 12.6 mm · Ø inside: 13.2 mm · Ø outside: 17.4 mm · Ø outside: 19.9 mm · Total length: 165 mm · Thread length: 25 mm · Thread length: 26 mm · Width across flats SW: 19 mm · Height: 9.9 mm · Ø shaft: 11.9 mm · Shank length: 114 mm · Width: 7 mm · Width: 10.2 mm · Width: 32 mm
17,00 EUR
Loctite 243 medium-strength threadlocker 10 ml
Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Contents [ml]: 10 ml · Color: blue · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Temperature resistance (min.): -75 - 200 °C · Type of application: 1K · Gap dimension (max.): 0.01 mm · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m · Area of application: Chemistry
25,30 EUR
2.530,00 EUR/l
swiing® revival wheel bearing set M11x1
Manufacturer: swiing® revival parts · Thread type: MF11x1 (fine pitch thread) · Diameter: 17.95 mm · Material: Steel · Surface: gas nitrided · Ø outside: 29 mm · Ø inside: 25.85 mm · Height: 10.6 mm · Height: 14.15 mm · Ø ball [inch] / [mm]: 7/32" (5.56 mm) · Width across flats SW: 15 mm
51,20 EUR
Moped fans like you also bought:
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Thread type: MF12x1 (fine pitch thread) · Possible lever positions: open / closed / reserve · Material lever: Metal · Filter type: Plastic net · Installation direction: horizontal / horizontal · Outlet direction: below · Mounting type: Union nut · Spare tube shape: curved · Ø fuel hose connection: 6 mm · Reserve level: 70 mm
11,50 EUR
Bearing cone M11x1 mm
Material: Steel · Surface: gas nitrided · Color: graphite colors · Thread type: MF11x1 (fine pitch thread) · Ø outside: 19 mm · Width across flats SW: 15 mm · Ø ball [inch] / [mm]: 1/4" (6.35 mm) · Ø ball [inch] / [mm]: 3/16" (4.78 mm) · Ø ball [inch] / [mm]: 7/32" (5.56 mm) · Height: 12 mm
9,15 EUR