High-quality deco cable (inner cable) suitable for various mopeds, mopeds and small motorcycles.
This starter cable was also used on bikes such as Puch, Puch Maxi, Sachs, Hercules, Pony, Zündapp, etc..
Ø decolitz: 1.5 mm
Cable length: 1.8 m (= 180 cm)
Ø nipple: 3 / 5 mm
Nipple length: 7 mm
A quality product made in Germany.
Details
Ø nipple | 3.3 mm, 5 mm |
Nipple length | 7 mm |
Manufacturer | Made in Germany |
Material | Steel |
Area of application | Standard |
Surface | blue galvanized |
Ø Stranded wire | 1.5 mm |
Nipple shape | Pears |
Cable length | 1800 mm |
Pony spare part no. | P0919 |
Suitable for the following models
Universal | |
Puch | E50 ZA50 (Fahrtwindgekühlt) ZA50 (Gebläsegekühlt) Z50 (X30 Sport) Z50 (X30 Velux) 2-Gang MS, MV, MV50 3-Gang VSD, DS, VZ, MC |
Sachs | 50 (Fahrtwind, 1.25 / 1.5 PS, DE) 502 (Saxonette) - AL, AML 50/2 - L CH (0.8 PS), ML CH (0.8 PS), MB (2.6 PS), MLB (2.6 PS) 50/3 50/4 - MLFB (2.6 PS), LKH (4.5 PS) 503 - AAL, ABL, 2AL / 2BL, AB, AC, ADV 504 (ohne Tretwelle) 505 (mit Tretwelle) - 1A (AT), 2 A (HG) 508 - 1 A 535 |
Pony / Cilo (Beta 521 & 512) | |
Piaggio | |
Zündapp Belmondo |
Accessories & related products
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Manufacturer: Magura · Ø Cable bushing: 1.6 mm · Material: Brass · Material: Steel · Surface: nickel-plated · Number of components: 2 pcs · Drive: Slot · Thread type: M4x0.7 (standard thread) · Ø outside: 5 mm · Total length: 6 mm · Screw head: Lens head · Thread length: 4 mm
2,25 EUR
swiing® revival washer slotted decompressor cable Inox | Puch Maxi S / N
Ø inside: 3.8 mm · Ø outside: 12 mm · Manufacturer: swiing® revival parts · Material: Chrome steel (stainless steel) · Area of application: Original · Area of application: Standard · Nominal diameter (thread): 3 mm · Thickness: 1.4 mm · Puch spare part no.: 349.1.67.005.1
4,35 EUR
Motorex Spray Intact 200 ml
Manufacturer: Motorex · Area of application: Chemistry · Area of application: Workshop accessories · Contents [ml]: 200 ml · Hazard warning: Extremely flammable aerosol · Hazard warning: May be fatal if swallowed and enters the respiratory tract · Hazard warning: May cause drowsiness and dizziness · Hazard warning: Pressurized container: may burst when heated · Signal word: Danger · Hazard pictogram: GHS02 - Highly flammable · Hazard pictogram: GHS07 - Caution dangerous
16,40 EUR
82,00 EUR/l
Moped fans like you also bought:
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø nipple: 3 mm · Manufacturer: Made in Germany · Material: Steel · Surface: blue galvanized · Area of application: Standard · Number of components: 1 pcs · Ø Stranded wire: 1.25 mm · Nipple shape: Cylinder · Cable length: 2200 mm · Nipple length: 5 mm
3,15 EUR
Brake cable Ø 1.8 mm x 220 cm (pear-shaped nipple)
Ø Stranded wire: 1.8 mm · Cable length: 2200 mm · Nipple shape: Pears · Ø nipple: 3.5 mm · Ø nipple: 6 mm · Nipple length: 10 mm · Manufacturer: Made in Germany · Number of components: 1 pcs · Material: Steel · Surface: blue galvanized · Area of application: Standard
2,70 EUR
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Manufacturer: Magura · Ø Cable bushing: 1.6 mm · Material: Brass · Material: Steel · Surface: nickel-plated · Number of components: 2 pcs · Drive: Slot · Thread type: M4x0.7 (standard thread) · Ø outside: 5 mm · Total length: 6 mm · Screw head: Lens head · Thread length: 4 mm
2,25 EUR
Inner cable Ø 1.2 mm x 200 cm with barrel nipple Ø 6 mm
Ø nipple: 6 mm · Nipple length: 5.5 mm · Manufacturer: Made in Germany · Material: Brass · Material: Steel · Surface: blue galvanized · Ø Stranded wire: 1.2 mm · Nipple shape: Barrel (transverse) · Cable length: 2000 mm · Number of components: 1 pcs · Area of application: Standard
3,80 EUR
Not in stock
Clutch cable / brake cable Ø 1.5 mm x 225 cm (pear-shaped nipple)
Ø nipple: 3.5 mm · Ø nipple: 6 mm · Nipple length: 10 mm · Manufacturer: Made in Germany · Area of application: Standard · Material: Steel · Surface: blue galvanized · Number of components: 1 pcs · Ø Stranded wire: 1.5 mm · Nipple shape: Pears · Cable length: 2250 mm · Piaggio spare part no.: 270460
2,70 EUR