Black painted EBR fork with reinforced bars suitable for various mopeds, mopeds and small motorcycles such as Hercules Prima, DKW, KTM, etc.
Be sure to check the dimensions beforehand to see if this fork fits your vehicle.
With clamp for attaching the handlebars to the fork plate.
The bolt for attaching the brake anchor plate is located on the right-hand side, 8 cm above the center of the wheel axle. The bolt has a length of 2.5 cm.
There are two M6 threaded bolts per fork leg to attach the mudguard. The distance between these bolts is adjustable and can be varied from 15 to 50 mm.
Internal diameter head tube (for stem mounting): 22 mm
Head tube length: 19.5 cm
Length from center of wheel axle to lower edge of lower fork crown: 40 cm
Total length: 64 cm
Thread: M26x1
Thread length on head tube: 6 cm
Matching headset kits can be found in the accessories section.
Branded product of the Italian manufacturer EBR.
Details
Manufacturer | EWC |
Material | Steel |
Surface | varnished, chrome-plated |
Adjustable | No |
Ø spars | 28 mm |
Thread type | MF26x1 (fine pitch thread) |
Color | black, Chrome |
Spar end distance (center-center) | 145 mm |
Thread length | 60 mm |
Ø outer head tube | 26.1 mm |
Ø head tube inside | 22.2 mm |
Head tube length | 195 mm |
Total length | 650 mm |
Fork bridge - center wheel axle | 410 mm |
Distance brake cam to wheel axle center-center | 80 mm |
Suitable for the following models
Sachs | |
DKW | |
Hercules |
Accessories & related products
swiing® revival snap ring low control bearing set (version 2.0)
Height: 7 mm · Manufacturer: swiing® revival parts · Material: Spring steel · Surface: blank · Thickness: 0.6 mm · Nominal diameter: 20 mm · Nominal diameter: 28 mm · Puch spare part no.: 349.1.30.015.1 · Sachs spare part no.: P0521
2,80 EUR
GPO steerer tube nut M26x1 closed fork plate chrome
Height: 13.8 mm · Manufacturer: GPO · Material: Steel · Surface: chrome-plated · Area of application: Standard · Nut type: Cap nut · Thread type: MF26x1 (fine pitch thread) · Drive: External hexagon · Ø outside: 28.9 mm · Ø outside: 36.4 mm · Thread depth: 12 mm · Width across flats SW: 30 mm
11,10 EUR
GPO steerer tube nut M26x1 open stem chrome
Height: 14 mm · Manufacturer: GPO · Material: Steel · Surface: chrome-plated · Nut type: Flange nut · Thread type: MF26x1 (fine pitch thread) · Drive: External hexagon · Ø inside: 22.1 mm · Ø outside: 36.5 mm · Thread depth: 11.5 mm · Width across flats SW: 30 mm
14,40 EUR
Moped fans like you also bought:
Handlebar fork plate 30 cm curved with chrome strut
Width: 680 mm · Height: 270 mm · Manufacturer: Made in Germany · Material: Steel · Surface: chrome-plated · Color: Chrome · Fork plate holder length: 90 mm · Clamping diameter: 22 mm · Ø outside: 22 mm · Mounting type: Fork plate · Length handlebar ends: 155 mm · Crossbar: Yes
36,70 EUR
Rubber grommet round 2 cables | Sachs 502, 503, 504 (A1923)
Total length: 7 mm · Material: Rubber · Surface: raw · Area of application: Standard · Ø Cable bushing: 2.2 mm · Color: black · Ø mounting hole: 8.5 mm · Ø Bundle: 10.5 mm · Ø outside: 12.8 mm · Waistband height: 2 mm · Pony spare part no.: A1923 · Sachs spare part no.: 0260 020 000
5,45 EUR
swiing® revival rubber grommet ignition cable | Sachs 503 2AL/2BL/AAL, 535 (A4521)
Manufacturer: swiing® revival parts · Material: Rubber · Surface: raw · Area of application: Standard · Ø Cable bushing: 5.2 mm · Color: black · Ø mounting hole: 8.5 mm · Ø outside: 10.5 mm · Ø Bundle: 10.5 mm · Waistband height: 3 mm · Pony spare part no.: A4520 · Pony spare part no.: A4521 · Sachs spare part no.: 0960 135 000 · Sachs spare part no.: 0960 136 000
6,60 EUR