Chrome-plated EBR fork suitable for Puch X30 NS, NL, NG-2AH and Supermaxi LG1 and LG2 mopeds.
The fork has a welded fork lock mount - just like the original Puch forks. (Figure 5).
You will find the matching fork lock and the matching mudguard arch in the accessories section below.
Provided for handlebar mounting on the fork plate.
Ø inner head tube (for stem mounting): 22 mm
Head tube length: 18 cm
Total length: 57 cm
Branded product from the Italian manufacturer EBR.
Details
| Manufacturer | EWC |
| Material | Steel |
| Total length | 575 mm |
| Surface | chrome-plated |
| Color | Chrome |
| Adjustable | No |
| Ø spars | 23025 mm |
| Spar end distance (center-center) | 120 mm |
| Ø outer head tube | 26 mm |
| Ø head tube inside | 22.3 mm |
| Head tube length | 180 mm |
| Thread type | MF26x1 (fine pitch thread) |
| Fork bridge - center wheel axle | 380 mm |
| Thread length | 58 mm |
| Distance brake cam to wheel axle center-center | 35 mm |
Suitable for the following models
| Puch |
Accessories & related products
GPO fork lock | Puch
Ø rotating part: 12 mm · Manufacturer: GPO · Wide locking block: 4.1 mm · Locking block length: 15.3 mm · Material: Brass · Material: Spring steel · Material: Steel · Surface: blank · Ø outside: 12 mm · Total length: 40.8 mm · Length of turned part: 25.6 mm · Width: 17 mm · Ø Pin: 8 mm
11,10 EUR
swiing® revival snap ring low control bearing set (version 2.0)
Nominal diameter: 20 mm · Nominal diameter: 28 mm · Manufacturer: swiing® revival parts · Material: Spring steel · Surface: blank · Thickness: 0.6 mm · Height: 7 mm · Puch spare part no.: 349.1.30.015.1 · Sachs spare part no.: P0521
2,80 EUR
GPO mudguard arch 17" front chrome
Manufacturer: GPO · Material: Steel · Outer width: 130 mm · Surface: chrome-plated · Wheel size [inch]: 17 " · Ø outside: 14 mm · Distance mudguard - center hole: 212 mm · Distance mudguard - center hole: 247 mm · Ø mounting hole: 5.9 mm · Ø mounting hole: 6.4 mm · Number of fixing points: 6 pcs · Wide intake: 115 mm · Total length: 270 mm · Mounting type: Nuts & bolts · Hole spacing: 35 mm · Color: Chrome
22,20 EUR
Moped fans like you also bought:
GPO fork lock | Puch
Ø rotating part: 12 mm · Manufacturer: GPO · Wide locking block: 4.1 mm · Locking block length: 15.3 mm · Material: Brass · Material: Spring steel · Material: Steel · Surface: blank · Ø outside: 12 mm · Total length: 40.8 mm · Length of turned part: 25.6 mm · Width: 17 mm · Ø Pin: 8 mm
11,10 EUR
swiing® revival snap ring low control bearing set (version 2.0)
Nominal diameter: 20 mm · Nominal diameter: 28 mm · Manufacturer: swiing® revival parts · Material: Spring steel · Surface: blank · Thickness: 0.6 mm · Height: 7 mm · Puch spare part no.: 349.1.30.015.1 · Sachs spare part no.: P0521
2,80 EUR
swiing® revival wheel axle set M12x1 x 185 cast rear wheel galvanized | Puch
Manufacturer: swiing® revival parts · Material: Steel · Surface: blue galvanized · Thread type: MF12x1 (fine pitch thread) · Width across flats SW: 19 mm · Ø shaft: 11.9 mm · Ø outside: 11.8 mm · Shank length: 100 mm · Total length: 185 mm · Thread length: 26 mm · Thread length: 52.5 mm
16,70 EUR
GPO pedal cranks pair chrome | Puch
Manufacturer: GPO · Material: Steel · Surface: chrome-plated · Thread type: FG14.3 (9/16" 20G) · Total length: 180 mm · Color: Chrome · Wide intake: 28 mm · Crank length (center-center): 156 mm · Ø Pedal wedge: 9.5 mm · Ø Pedal axle: 16 mm · Cranking (offset): 37 mm · Cranking (offset): 49 mm
83,70 EUR
GPO mudguard arch 17" front chrome
Manufacturer: GPO · Material: Steel · Outer width: 130 mm · Surface: chrome-plated · Wheel size [inch]: 17 " · Ø outside: 14 mm · Distance mudguard - center hole: 212 mm · Distance mudguard - center hole: 247 mm · Ø mounting hole: 5.9 mm · Ø mounting hole: 6.4 mm · Number of fixing points: 6 pcs · Wide intake: 115 mm · Total length: 270 mm · Mounting type: Nuts & bolts · Hole spacing: 35 mm · Color: Chrome
22,20 EUR
Collection only possible with online purchase and appointment.
