Moderate Casual 
Set consisting of pole wheel, light coil and pulse coil suitable for your Piaggio Ciao, Si, Bravo and Boxer moped / moped.
The ignition wheel can only be installed on engine housings that are designed for contact ignition.
Mäsig-läsig! – We strive to offer you the widest range of moped spare parts. However, this product is of rather poor quality and is not recommended by us. Should you nevertheless choose this item, we understand, but cannot offer you any guarantee or exchange.
The keyway of the pole wheel is in the wrong position depending on the batch, resulting in incorrect ignition timing. The magnets in the pole wheel are also not positioned correctly, which can interrupt the entire electrical circuit within the ignition.
Details
| Manufacturer | Quenching |
| Material | Aluminum, Steel |
| Ø Internal flywheel | 92 mm |
| Tension | 6 V |
| Direction of rotation | right |
| Weight | 1300 g |
| Ø Flywheel outside | 141 mm |
| Area of application | Standard |
Suitable for the following models
| Piaggio | Ciao - Ciao, Ciao, Ciao, Ciao Si Bravo/Superbravo Boxer Grillo |
Accessories & related products
swiing® ingenious puller flywheel | Piaggio Ciao, SI, Bravo, Boxer
Width across flats (trigger): 10 mm · Width across flats (trigger): 18 mm · Manufacturer: swiing® ingenious parts · Material: Steel · Area of application: (Dis)assembly tool · Surface: blackened · Surface: blue galvanized · Diameter: 12 mm · Diameter: 24 mm · Thread type: MF12x1.5 (fine pitch thread) · Thread type: MF17x1 (fine pitch thread) · Total length: 100 mm · Width across flats Screw: 19 mm · Number of components: 2 pcs
20,00 EUR
GPO breaker without cable (version 2.0) | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: GPO · Area of application: Original · Area of application: Standard · Material: Steel · Cable available: No · Ø axle: 5 mm · Number of fixing points: 1 pcs · Ø mounting hole: 5 mm · Piaggio spare part no.: 103133
11,10 EUR
swiing® revival condenser with cable | Piaggio Ciao, SI, Bravo, Boxer
Height: 26 mm · Manufacturer: swiing® revival parts · Capacity: 0.28 µF · Ø outside: 18 mm · Mounting type: Tab for screwing · Connection type: Cable for screwing · Area of application: Original · Area of application: Standard · Ø mounting hole: 4.4 mm · Piaggio spare part no.: 102939
13,30 EUR
Moderate Casual
Flywheel puller | Piaggio Ciao, SI, Bravo, Boxer
Width across flats (trigger): 19 mm · Width across flats Screw: 18 mm · Manufacturer: Quenching · Pull-off depth inside: 68 mm · Area of application: (Dis)assembly tool · Material: Steel · Surface: burnished · Surface: galvanized · Diameter: 12.9 mm · Total length: 36.5 mm · Number of components: 2 pcs · Thread type: MF17x1 (fine pitch thread)
13,30 EUR
Moped fans like you also bought:
EFFE Condenser with cable | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: EFFE · Area of application: Original · Area of application: Standard · Capacity: 0.26 µF · Mounting type: Tab for screwing · Connection type: Cable for screwing · Ø outside: 18 mm · Height: 26 mm · Ø mounting hole: 4.4 mm · Piaggio spare part no.: 102939
13,30 EUR
GPO breaker without cable (version 2.0) | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: GPO · Area of application: Original · Area of application: Standard · Material: Steel · Cable available: No · Ø axle: 5 mm · Number of fixing points: 1 pcs · Ø mounting hole: 5 mm · Piaggio spare part no.: 103133
11,10 EUR
swiing® revival condenser with cable | Piaggio Ciao, SI, Bravo, Boxer
Height: 26 mm · Manufacturer: swiing® revival parts · Capacity: 0.28 µF · Ø outside: 18 mm · Mounting type: Tab for screwing · Connection type: Cable for screwing · Area of application: Original · Area of application: Standard · Ø mounting hole: 4.4 mm · Piaggio spare part no.: 102939
13,30 EUR
Collection only possible with online purchase and appointment.
