Shift lever suitable for Sachs 50 engines.
These are those engines that correspond to the type 50/2, but are equipped with the small Bing SSB carburetor without air filter cap and with a chain drive from the crankshaft to the clutch basket.
Attention: This shift shaft cannot be used with conventional Sachs 50/2 engines, as the fixing screw is not countersunk and would therefore touch the air filter cap.
Details
| Material | Steel |
Suitable for the following models
| Sachs | 50 (Fahrtwind, 1.25 / 1.5 PS, DE) |
Accessories & related products
swiing oil drain plug M10x1 | Sachs 50/2, 503 2AL/2BL, 504/2 (A1470)
Width across flats Screw: 14 mm · Manufacturer: swiing · Material: Steel · Surface: burnished · Thread type: MF10x1 (fine pitch thread) · Drive: External hexagon · Screw head: Hexagon · Pony spare part no.: A1470 · Sachs spare part no.: 0241 029 000
9,95 EUR
swiing® revival manual shift spring | Sachs 50/2, 503 2AL, 2BL (A1337)
Spring design: Tension spring · Ø wire: 1.25 mm · Length spring hook: 8 mm · Manufacturer: swiing® revival parts · Material: Spring steel · Surface: burnished · Ø inside: 6 mm · Total length: 28 mm · Ø outside: 8.5 mm · Color: gray · Pony spare part no.: A1337 · Sachs spare part no.: 0239 102 100
12,20 EUR
swiing® revival T-slot nut new version | Sachs 50/2, 503 2AL/2BL (A1910)
Ø Pin: 3.95 mm · Total height: 7.5 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: Hardened · Width: 4.22 mm · Total length: 8.85 mm · Pony spare part no.: A1910 · Sachs spare part no.: 0259 021 000
12,20 EUR
Moped fans like you also bought:
Magura cable clamp Sachs shift/clutch arm
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: blue galvanized · Surface: nickel-plated · Number of components: 2 pcs · Ø shaft: 4 mm · Total length: 11 mm · Ø Cable bushing: 2.8 mm · Ø outside: 7 mm · Screw head: Hexagon · Drive: External hexagon · Drive: Slot · Ø Bundle: 7 mm · Thread length: 7 mm · Width across flats SW: 6 mm · Thread type: M4x0.7 (standard thread)
2,80 EUR
GPO Horn 12V chrome (AC - alternating current)
Ø outside: 70 mm · Manufacturer: GPO · Material: Steel · Color: Chrome · Surface: chrome-plated · Mounting type: Screws · Width: 70 mm · Type of current: Alternating current (AC) · Height: 35 mm · Tension: 12 V · Number of fixing points: 2 pcs
22,20 EUR
swiing® revival cylinder base gasket cylinder 0.3 mm | Sachs 503
Ø inside: 45 mm · Nominal diameter: 45 mm · Manufacturer: swiing® revival parts · Material: Oiled paper · Area of application: Standard · Ø cylinder: 38 - 40 mm · Thickness: 0.3 mm · Place of use: Cylinder base · Hole pattern [mm]: 60 x 40
3,80 EUR
Not in stock
Main stand black | Sachs Pony GTX / GTA 16" rim (P1776)
Manufacturer: Pony · Material: Steel · Surface: varnished · Stand base - center mount (A): 220 mm · Total width of stand base (B): 230 mm · Wide receptacle (C): 69 mm · Ø Receptacle (D): 12 mm · Spring nipple distance - center pivot axis (E): 70 mm · Wide upright foot (F): 20 mm · Color: black · Total height: 235 mm · Pony spare part no.: P1776
122,80 EUR
Collection only possible with online purchase and appointment.
