Slotted Ø 80x18 mm brake pads with return springs for front and rear drum brakes on your moped, moped and small motorcycle.
Slotted brake pads enable improved heat and brake dust release, resulting in an increased braking effect. This improved braking power is suitable for daily use, especially with slightly increased performance.
The pad compound corresponds to the AKOA alternative sold on the market. The quality is okay and the brakes fulfill their purpose, but do not reach the level of the swiing® brake pads in terms of braking performance and durability.
Note: These brake shoes are not suitable for bicycle riders.
Alternative brake pads with an even higher quality pad compound for racing applications, suitable springs and appropriate cleaning agents and lubricants can be found in the accessories section.
Good, inexpensive standard spare part. GPO – GOOD PARTS ONLY.
Details
| Slotted | Yes |
| Manufacturer | GPO |
| Area of application | Tuning |
| Ø drum | 80 mm |
| Springs included | Yes |
| Number of springs | 2 pcs |
| Width | 18 mm |
Accessories & related products
Moped fans like you also bought:
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø Stranded wire: 1.25 mm · Nipple shape: Cylinder · Ø nipple: 3 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Cable length: 2200 mm · Number of components: 1 pcs · Nipple length: 5 mm · Area of application: Standard
3,20 EUR
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Possible lever positions: open / closed / reserve · Material lever: Metal · Filter type: Plastic net · Thread type: MF12x1 (fine pitch thread) · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Ø fuel hose connection: 6 mm · Reserve level: 70 mm · Mounting type: Union nut
11,30 EUR
swiing® revival bottom bracket bushing nylon | Puch Maxi, X30 Sport, Velux, NG-2AH
Bearing type: Plain bearing · Manufacturer: swiing® revival parts · Material: Nylon · Surface: blank · Ø inside: 16.2 mm · Color: black · Ø outside: 20.2 mm · Ø Bundle: 24.1 mm · Total length: 19 mm · Puch OEM number: 349.1.42.005.1
2,85 EUR
Fortune / Merrick 2.00-2.50 x 16/17" inner tube
Manufacturer: Fortune · Tire width [inch]: 2 - 2.5 " · Tire width [mm]: 50.8 - 63.5 · Width [inch]: 2 · Width [inch]: 2 1/4 · Width [inch]: 2 1/2 · Tire height [%]: 100 · Wheel size [inch]: 16 - 17 " · Wheel size [inch]: 17 " · Valve type: TR4 Auto valve · Old designation: 20 x 2 · Old designation: 20 x 2.25 · Old designation: 20 x 2.5 · Old designation: 21 x 2 · Old designation: 21 x 2.25 · Old designation: 21 x 2.5
11,30 EUR
NTN wheel bearing 12/28/8 rear cast hub Leleu | Puch Maxi
Width: 8 mm · Bearing type: Deep groove ball bearing · Stock number: 6001 · Inner ring width: 12 mm · Manufacturer: NTN · Ball bearing closed: Yes · Dust protection type: 2RS - NBR contact seal on both sides · Bearing clearance: CM (special/noise-reduced) · Bearing cage: "-" Sheet steel cage ball-guided · Groove ring: No · Area of application: Standard · Material: Plastic · Material: Steel · Surface: blank · Ø inside: 12 mm · Ø outside: 28 mm
6,75 EUR
Inner cable set automatic | Puch E50
Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Nipple shape: Barrel (transverse) · Nipple shape: Cylinder · Nipple shape: Pears · Manufacturer: Made in Germany · Total length: 1600 mm · Total length: 2200 mm · Quantity: 4 pcs · Material: Steel
11,30 EUR
Collection only possible with online purchase and appointment.
