Inox

Short version of the bolt for holding the support plate (brake anchor plate) made of stainless steel for your Puch Maxi S, N, S-2A / Supermaxi LG1, LG2 mopeds
Including M10x1 nut and matching washer.

Total length: 32 mm
Ø bolt: 9.8 mm
Thread: M10

The M10x1 nut and a matching washer for the stud are included in the scope of delivery.

Good, inexpensive standard spare part. GPO – GOOD PARTS ONLY.

Original Puch spare part number: 349.1.41.008.1

Details

Manufacturer	GPO
Material	Chrome steel (stainless steel)
Number of components	3 pcs
Thread type	MF10x1 (fine pitch thread)
Drive	Outer edge
Ø External head	14 mm
Shank	Yes
Ø shaft	9.8 mm
Shank length	9.5 mm
Area of application	Standard

Total length	32 mm
Thread length	13 mm
Width across flats SW	13 mm, 17 mm

Suitable for the following models

Puch

E50

ZA50 (Fahrtwindgekühlt)

Accessories & related products

Rear brake plate incl. brake shoes | Puch Maxi S

For: Puch

10441

Rear brake plate incl. brake shoes | Puch Maxi S

67,00 EUR

Inox

Set

GPO brake cam & retaining plate set | Puch Maxi N

For: Puch

19616

GPO brake cam & retaining plate set | Puch Maxi N

Manufacturer: GPO · Material: Chrome steel (stainless steel) · Material: Steel · Surface: blue galvanized

23,40 EUR

swiing® revival brake cam rear wheel | Puch Maxi

For: Puch

22135

swiing® revival brake cam rear wheel | Puch Maxi

Manufacturer: swiing® revival parts · Material: Steel · Surface: blue galvanized

16,70 EUR

swiing® revival rear brake anchor plate | Puch Maxi S, X30 NG

For: Puch

22298

swiing® revival rear brake anchor plate | Puch Maxi S, X30 NG

Ø bore: 12.2 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: blue galvanized · Ø External brake pads: 80 mm · Ø axle: 12 mm · Ø outside: 91 mm · Ø screw holder: 6.5 mm · Ø shaft: 10 mm · Wide cam holder: 12 mm · Brake lever length (lever length): 55 mm · Total length: 187 mm · Cranking (offset): 8 mm

78,10 EUR

swiing® revival rear brake anchor plate | Puch Maxi N

For: Puch

22299

swiing® revival rear brake anchor plate | Puch Maxi N

Ø bore: 12.2 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: blue galvanized · Ø External brake pads: 80 mm · Total length: 135 mm · Ø axle: 12 mm · Ø outside: 92 mm · Ø screw holder: 6.5 mm · Ø shaft: 10 mm · Wide cam holder: 12 mm · Brake lever length (lever length): 68 mm · Cranking (offset): 10 mm

83,70 EUR

swiing brake shoes Ø 80 x 18 Racing slotted | Puch Maxi

For: Puch

23581

swiing brake shoes Ø 80 x 18 Racing slotted | Puch Maxi

Manufacturer: swiing · Ø drum: 80 mm · Number of springs: 2 pcs · Springs included: Yes · Width: 18 mm · Slotted: Yes · Area of application: Racing

22,20 EUR

Moped fans like you also bought:

swiing® revival cable guide mudguard black | Puch

For: Puch

10029

swiing® revival cable guide mudguard black | Puch

Manufacturer: swiing® revival parts · Material: Plastic · Color: black · Height: 12.5 mm · Number of fixing points: 2 pcs · Hole spacing: 63 mm · Mounting type: Plug connection · Total length: 74 mm

4,35 EUR

For: Puch

10077

GPO control bearing set M26x1 mm | Puch

Bearing type: Bearing ring · Manufacturer: GPO · Material: Steel · Surface: blue galvanized · Color: silver · Thread type: MF26x1 (fine pitch thread) · Ø mounting frame: 31 mm · Ø outside: 41 mm · Ø inside: 26.8 mm

13,30 EUR

Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom

Universal

10181

Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom

Possible lever positions: open / closed / reserve · Material lever: Metal · Thread type: MF12x1 (fine pitch thread) · Filter type: Plastic net · Installation direction: horizontal / horizontal · Outlet direction: below · Mounting type: Union nut · Spare tube shape: curved · Ø fuel hose connection: 6 mm · Reserve level: 70 mm

11,10 EUR

GPO cable duct black | Puch Maxi, Supermaxi

For: Puch

10256

GPO cable duct black | Puch Maxi, Supermaxi

Manufacturer: GPO · Material: Plastic · Color: black · Total length: 320 mm · Width: 58 mm · Height: 22 mm · Number of fixing points: 2 pcs · Ø mounting hole: 5.3 mm

8,85 EUR

GPO rear mudguard attachment 17" | Puch Maxi N

For: Puch

10451

GPO rear mudguard attachment 17" | Puch Maxi N

Manufacturer: GPO · Material: Steel · Surface: chrome-plated · Color: Chrome · Wheel size [inch]: 17 " · Total length: 300 mm · Number of fixing points: 4 pcs · Ø mounting hole: 6 mm · Mounting type: Nuts & bolts

16,70 EUR

swiing® revival frame guard black | Puch Maxi N

For: Puch

10456

swiing® revival frame guard black | Puch Maxi N

Manufacturer: swiing® revival parts · Material: Plastic · Surface: raw · Color: black · Width: 54 mm · Height: 20 mm · Number of fixing points: 1 pcs · Ø mounting hole: 21.5 mm · Mounting type: Plug connection · Total length: 175 mm

22,20 EUR

For: Puch

10481

Exhaust mounting plate | Puch Maxi N

Manufacturer: Made in Portugal · Material: Steel · Surface: blue galvanized · Cranking (offset): 23 mm · Number of fixing points: 2 pcs · Ø mounting hole: 8.5 mm · Ø mounting hole: 11 mm

8,85 EUR

Inox

Set