Sprocket for mopeds / mopeds from various manufacturers such as Puch, Sachs, Hercules, Pony, Piaggio, Solex, Zündapp or even Tomos.
High-quality pedal sprocket made of hardened steel with 1/2 "x1/8" sprocket pitch.
A thread FG 34.8 (inner diameter 34.0 mm) is used to mount the pedal sprocket.
You can find more freewheel sprockets and matching chains in the accessories section.
Good, inexpensive standard spare part. GPO – GOOD PARTS ONLY.
Details
Chain pitch | 1/2" x 1/8" |
Manufacturer | GPO |
Material | Steel |
Surface | blue galvanized |
Thread type | FG34.8 (1.37" 24G) |
Number of teeth | 22 pcs |
Thickness | 15.5 mm |
Suitable for the following models
Universal | |
Puch | |
Sachs |
Moped fans like you also bought:
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Possible lever positions: open / closed / reserve · Material lever: Metal · Thread type: MF12x1 (fine pitch thread) · Filter type: Plastic net · Ø fuel hose connection: 6 mm · Installation direction: horizontal / horizontal · Outlet direction: below · Mounting type: Union nut · Spare tube shape: curved · Reserve level: 70 mm
11,10 EUR
swiing® revival side protection screw set chrome | Puch Maxi S
Manufacturer: swiing® revival parts · Material: Plastic · Material: Steel · Surface: blue galvanized · Surface: chrome-plated · Color: Chrome · Thread type: M5x0.8 (standard thread) · Color: silver · Drive: Slot · Drive: Triangular head · Total length: 48 mm · Total length: 63 mm · Thread length: 35 mm · Thread length: 50 mm
16,80 EUR
NTN 6201 2RS ball bearing 12/32/10
Bearing cage: "-" Sheet steel cage ball-guided · Ø inside: 12 mm · Stock number: 6201 · Inner ring width: 10 mm · Manufacturer: NTN · Dust protection type: 2RS - NBR contact seal on both sides · Bearing clearance: CN (standard) · Bearing type: Deep groove ball bearing · Width: 10 mm · Ø outside: 32 mm · Ball bearing closed: Yes
11,10 EUR
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom | Puch Maxi S, N
Possible lever positions: open / closed / reserve · Material lever: Aluminum · Thread type: MF12x1 (fine pitch thread) · Filter type: Plastic net · Ø fuel hose connection: 6 mm · Installation direction: horizontal / horizontal · Outlet direction: below · Mounting type: Union nut · Spare tube shape: curved · Reserve level: 70 mm · Puch spare part no.: 349.3.22.030.0 · Puch spare part no.: 349.4.22.030.0
11,10 EUR
swiing® revival rear brake anchor plate | Puch Maxi N
Manufacturer: swiing® revival parts · Material: Steel · Surface: blue galvanized · Ø outside: 92 mm · Ø External brake pads: 80 mm · Ø axle: 12 mm · Ø shaft: 10 mm · Ø bore: 12.2 mm · Ø screw holder: 6.5 mm · Wide cam holder: 12 mm · Total length: 135 mm · Brake lever length (lever length): 68 mm · Cranking (offset): 10 mm
83,70 EUR