Black pair of handlebar grips with gray Flame decor.
One set consists of one grip cover with an inner diameter of 22 or 24 mm.
For a manual moped, moped or small motorcycle that requires two grip covers with an inner diameter of 24 mm, you must therefore order two grip sets. The grip ends are closed, but can be opened individually if required (e.g. for mounting a side mirror).
Total length of rubber grip: 125 mm
To make mounting easier, we recommend heating the rubber grip slightly or spraying it with hairspray on the inside.
Good, inexpensive standard spare part. GPO – GOOD PARTS ONLY.
Details
Ø inside | 22 mm, 24 mm |
Total length | 125 mm |
Manufacturer | GPO |
Material | Rubber |
Color | black, gray |
Accessories & related products
Handlebar fork plate 40 cm curved with chrome strut
Manufacturer: Made in Germany · Material: Steel · Width: 730 mm · Surface: chrome-plated · Fork plate holder length: 100 mm · Ø outside: 22 mm · Clamping diameter: 22 mm · Color: Chrome · Length handlebar ends: 150 mm · Mounting type: Fork plate · Crossbar: Yes · Height: 400 mm
39,00 EUR
GPO light switch with wiring harness base chrome version
Manufacturer: GPO · Total length: 50 mm · Material: Plastic · Housing material: Steel · Width: 30 mm · Substructure material: Steel · Surface: chrome-plated · Functions: High beam (headlights) · Functions: Horn · Functions: Light off · Functions: Low beam · Functions: Motor stop · Number of positions: 3 pcs · Number of cables: 5 pcs · Cable length: 970 mm · Cable bifurcation to motor: 970 mm · Color: Chrome · Cable bifurcation to lamp: 180 mm · Cable bifurcation to switch: 420 mm · Ø Handlebars: 22 mm · Height: 25 mm
18,90 EUR
Moped fans like you also bought:
GPO license plate holder Inox
Thread type: M5x0.8 (standard thread) · Manufacturer: GPO · Total length: 145 mm · Material: Chrome steel (stainless steel) · Width: 105 mm · Thread length: 8 mm · Color: silver · Hole spacing: 30 mm · Hole spacing: 50 mm · Mounting type: Nuts & bolts · Ø mounting hole: 5 mm · Number of fixing points: 2 pcs · Height: 5.3 mm
12,20 EUR
GPO chain tensioner | Puch Maxi S
Thread type: M6x1 (standard thread) · Manufacturer: GPO · Total length: 175 mm · Material: Plastic · Material: Steel · Surface: blue galvanized · Number of teeth: 10 pcs · Ø outside sprocket: 36 mm · Color: black · Color: silver · Number of fixing points: 1 pcs
11,10 EUR
Adhesive kit tank & frame black PVC carrier film | Puch Maxi S
Height: 26 mm · Height: 60 mm · Height: 65 mm · Width: 123 mm · Width: 230 mm · Width: 330 mm · Material: Polyvinyl chloride (PVC-U_hard) · Color: black · Color: white · Rear side texture: Adhesive · Consistency: UV-resistant · Consistency: petrol resistant · Place of use: Frame (+ tank)
10,50 EUR
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Thread type: MF12x1 (fine pitch thread) · Possible lever positions: open / closed / reserve · Material lever: Metal · Filter type: Plastic net · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Mounting type: Union nut · Ø fuel hose connection: 6 mm · Reserve level: 70 mm
11,10 EUR
swiing® revival side protection screw set black | Puch Maxi S
Thread type: M5x0.8 (standard thread) · Manufacturer: swiing® revival parts · Material: Plastic · Material: Steel · Surface: blue galvanized · Surface: raw · Drive: Slot · Drive: Triangular head · Thread length: 35 mm · Thread length: 50 mm · Color: silver · Total length: 47 mm · Total length: 60 mm
14,40 EUR