High-quality replica tie rod for Zündungen with small Bosch flywheel, which were installed on Zündapp ZD 10, ZD 30, ZR 10, ZR 20, ZR 30, ZA 25 and ZA 40 mopeds, among others.
Hole spacing (center - center): 46.5 mm
Hole diameter: 4.6 mm
For flywheels with an inner diameter of 80 mm
Original Zündapp spare part number: 249-07.908
Original BOSCH spare part number: 2 204 211 052
Good, inexpensive standard spare part. GPO – GOOD PARTS ONLY.
Details
| Total length | 69.7 mm |
| Manufacturer | GPO |
| Ø cable holder | 6.1 mm |
| Place of use | Internal (in the ignition) |
| Area of application | Standard, Original |
| Ø mounting hole | 4.6 mm |
| Color | black |
| Ø Internal flywheel | 80 mm |
| Mounting type | Screws |
| Cable length | 68 mm |
| Height | 11 mm |
| Hole spacing | 46.5 mm |
| Number of fixing points | 2 pcs |
Suitable for the following models
| Zündapp |
Moped fans like you also bought:
BERU spark plug connector / 1 kΩ interference suppressed
Manufacturer: BERU · Material: Sheet metal (steel) · Color: silver · Ø cable: 5 mm · Ø cable: 7 mm · Spark plug socket: M4 · Cable available: No · Suppressed: Yes · Resistance: 1000 Ω · Component group Carburetor: Spraying · Pony OEM number: A2099 · Sachs OEM no.: 0265 100 00
10,00 EUR
Fortune / Merrick 2.00-2.50 x 16/17" inner tube
Manufacturer: Fortune · Tire width [inch]: 2 - 2.5 " · Tire width [mm]: 50.8 - 63.5 · Width [inch]: 2 · Width [inch]: 2 1/4 · Width [inch]: 2 1/2 · Tire height [%]: 100 · Wheel size [inch]: 16 - 17 " · Wheel size [inch]: 17 " · Old designation: 20 x 2 · Old designation: 20 x 2.25 · Old designation: 20 x 2.5 · Old designation: 21 x 2 · Old designation: 21 x 2.25 · Old designation: 21 x 2.5 · Valve type: TR4 Auto valve
11,30 EUR
BERU breaker with cable (small) | Bosch / Ducati / Minarelli
Manufacturer: BERU · Material: Steel · Ø axle: 4 mm · Ø mounting hole: 4.5 mm · Cable available: Yes · Number of fixing points: 1 pcs · Area of application: Original · Area of application: Standard · Ø Internal flywheel: 80 mm · Morini OEM number: 29 0026 005 · Morini OEM number: 29 0034 005 · Pony OEM number: A2496 · Minarelli OEM number: 82 000 16 · BOSCH OEM number: 2 207 013 005 · BOSCH OEM number: 2 207 110 007 · BERU OEM number: 0 340 100 458 · Fantic OEM number: 320 4500 5150
21,60 EUR
swiing condenser for screwing | Bosch / Ducati
Manufacturer: swiing · Capacity: 0.16 µF · Ø outside: 18 mm · Height: 23 mm · Mounting type: Plug connection clamped · Connection type: Thread for screwing · Thread type: M3x0.5 (standard thread) · Area of application: Original · Area of application: Standard · BOSCH OEM number: 2 207 330 050
11,30 EUR
Hot 
swiing 15 mm carburetor tuning camouflaged | Puch
Manufacturer: swiing · Camouflaged: Yes · Component group Carburetor: Carburetor complete · Material: Aluminum · Carburetor type: SRE · Nominal diameter: 15 mm · Ø Internal connection: 20 mm · Ø Inside entrance: 15 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.17 · Nozzle size: 62 · Mounting type: Plug connection clamped · Clamping screw torque (max.): 4 N/m · Total length: 66 mm · Width: 50 mm · Height: 95 mm · Area of application: Tuning
91,50 EUR
Ignition cable Ø 5 x 450 mm (1A quality)
Manufacturer: Made in Germany · Material: Copper · Material: Plastic · Color: black · Ø cable: 5 mm · Total length: 450 mm · Suppressed: No · Component group Carburetor: Carburetor complete · Pony OEM number: A4603 · Sachs OEM no.: 0965 133 001
3,90 EUR
8,67 EUR/m
Collection only possible with online purchase and appointment.
