Simple, black tail light in "old-school design" for your moped, moped and small motorcycle.
Very similar to old Hella, ULO or CEV tail lights.
Three plastic dots are attached to each side, through which the light shimmers.
The glass is embedded in an aluminum socket.
The rear light has two bulbs with 6V and 3W and 5W respectively.
Two screws are embedded in the rear light for fastening. The rear light can therefore be attached to the mudguard.
Thread: M5
Screw spacing: 58 mm
Bulb: E10 (both bulbs are already installed)
Total length: 110 mm
Total width with base: 64 mm
Depth: 65 mm
Alternative rear lights and bulbs can be found in the accessories section.
Good, inexpensive standard spare part. GPO – GOOD PARTS ONLY.
Details
Manufacturer | GPO |
Material | Plastic, Aluminum |
Color | black, red |
Tension | 6 V |
Bulb holder | E10 |
Depth | 65 mm |
Width | 64 mm |
Battery operated | No |
Number of fixing points | 2 pcs |
Height | 110 mm |
Mounting type | Nuts & bolts |
Accessories & related products
GPO tail light ULO | Puch Maxi N, S old version
Manufacturer: GPO · Material: Plastic · Color: black · Color: red · Tension: 6 V · Width: 60 mm · Height: 110 mm · Bulb holder: BA15s · Ø Receptacle: 4 mm · Battery operated: No · Test mark: none · Depth: 80 mm · Mounting type: Nuts & bolts · Number of fixing points: 2 pcs
40,80 EUR
Rear light ULO | Sachs, Puch
Material: Aluminum · Material: Steel · Test mark: none · Color: Chrome · Color: red · Mounting type: Nuts & bolts · Width: 57 mm · Height: 90 mm · Bulb holder: E10 · Ø Receptacle: 5 mm · Tension: 6 V · Battery operated: No · Depth: 55 mm · Number of fixing points: 2 pcs
65,60 EUR
Not in stock
Moped fans like you also bought:
BERU spark plug connector / 1 kΩ interference suppressed
Manufacturer: BERU · Material: Sheet metal (steel) · Ø cable: 5 mm · Ø cable: 7 mm · Spark plug socket: M4 · Cable available: No · Suppressed: Yes · Resistance: 1000 Ω · Color: silver · Pony spare part no.: A2099 · Sachs spare part no.: 0265 100 00
9,75 EUR
swiing® revival upright spring blue galvanized | Puch
Spring design: Tension spring · Ø wire: 2.5 mm · Length spring hook: 19 mm · Length spring hook: 53 mm · Manufacturer: swiing® revival parts · Material: Spring steel · Surface: blue galvanized · Ø inside: 9 mm · Total length: 122 mm · Ø outside: 14 mm
3,00 EUR
GPO sprocket 45 teeth black | Puch Maxi, Puch X30 NG-2AH
Chain type: 415H · Manufacturer: GPO · Thickness: 4.5 mm · Material: Steel · Surface: powder-coated · Number of teeth: 45 pcs · Ø inside: 94 mm · Chain pitch: 1/2" x 3/16" · Color: black · Hole spacing: 36.5 mm · Hole spacing 2: 68 mm · Ø bolt circle: 105.5 mm · Ø mounting hole: 6.7 mm · Cranking (offset): 8 mm · Number of fixing points: 6 pcs
22,20 EUR
swiing® revival 17" front fender square Inox | Puch Maxi S, N
Manufacturer: swiing® revival parts · Material: Chrome steel (stainless steel) · Surface: polished · Folding the ends: closed folded · Shape of the mudguard: angular · Wheel size [inch]: 17 " · Total length over ends: 565 mm · Scope: 740 mm · Wide mudguard profile: 82 mm · Height of mudguard profile: 35 mm · Color: Chrome · Total height from support surface to top edge: 200 mm · Mounting type: Nuts & bolts
39,00 EUR
Bumm mirror round Inox
Manufacturer: Bumm · Material: Chrome steel (stainless steel) · Material: Steel · Surface: chrome-plated · Ø mirror surface: 107 mm · Ø mirror rod: 8 mm · Mirror rod length: 300 mm · Clamping diameter: 22 mm · Color: Chrome · Total length: 360 mm · Thread size: M8 · Thread type: M8x1.25 (standard thread)
27,80 EUR
swiing® revival side protection screw set black | Puch Maxi S
Manufacturer: swiing® revival parts · Material: Plastic · Material: Steel · Surface: blue galvanized · Surface: raw · Drive: Slot · Drive: Triangular head · Color: silver · Total length: 47 mm · Total length: 60 mm · Thread length: 35 mm · Thread length: 50 mm · Thread type: M5x0.8 (standard thread)
14,40 EUR