Grip set made from a soft, gray rubber compound.
The Piaggio logo is embedded on both grips.
The grip set consists of two grips with an inner diameter of 22 mm. It therefore requires some effort to get the grip over the throttle grip.
However, the material is quite soft and stretchy.
Length of the grip pull (measured from the inside): 13.4 cm
A quality product made in Italy.
Details
Total length | 134 mm |
Manufacturer | Made in Italy |
Material | Rubber |
Color | gray, white |
Ø inside | 22 mm |
Suitable for the following models
Universal | |
Piaggio |
Moped fans like you also bought:
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø nipple: 3 mm · Manufacturer: Made in Germany · Area of application: Standard · Material: Steel · Surface: galvanized (blue) · Ø Stranded wire: 1.25 mm · Cable length: 2200 mm · Nipple shape: Cylinder · Nipple length: 5 mm · Number of components: 1 pcs
3,20 EUR
Brake cable Ø 1.8 mm x 220 cm (pear-shaped nipple)
Ø Stranded wire: 1.8 mm · Nipple shape: Pears · Ø nipple: 3.5 mm · Ø nipple: 6 mm · Manufacturer: Made in Germany · Area of application: Standard · Material: Steel · Surface: galvanized (blue) · Number of components: 1 pcs · Cable length: 2200 mm · Nipple length: 10 mm
2,75 EUR
Motorex engine oil (gear oil) manual 450 ml
Manufacturer: Motorex · Oil type: GL4 · Viscosity (SAE): 80W · Area of application: Gearbox lubrication with clutch · Contents [ml]: 450 ml · Gearbox type: Foot control · Gearbox type: Manual gearshift · Temperature resistance (min.): -30 - 220 °C
11,30 EUR
25,11 EUR/l
GPO 85° carburetor pipe bend brass M6x0.75
Material: Brass · Ø outside: 6 mm · Total length: 45.5 mm · Total length: 53.5 mm · Manufacturer: GPO · Height: 30 mm · Component group Carburetor: Adjusting screws, float, etc. · Internal thread: MF6x0.75 (fine pitch thread) · Thread type: MF6x0.75 (fine pitch thread) · Angle: 85 ° · Width across flats nut: 8 mm · Pony OEM number: A2066 · Sachs OEM no.: 0261 132 000
6,75 EUR