Not so nice 
Valuable front light with parking light and low beam made of black matt plastic for Piaggio Si mopeds / mopeds.
The light has side tabs for routing the cable harness.
The front light can be fitted with both conventional P26s bulbs and P26s LED bulbs.
A filament bulb with PS26s socket and a 43 mm socket bulb as indicator light are included in the scope of delivery.
All common speedometers with 48 mm diameter can be installed in the front light.
Ø outside: 130 mm
Hole spacing: 115 mm
Tachometer cut-out: 48 mm
Installed low beam bulb: PS26s 12V - 21W
Installed base bulb: 12V - 10W
Mark: E3 S3
Mäsig-läsig! – We strive to offer you the widest range of moped spare parts. However, this product is of rather poor quality and is not recommended by us. Should you nevertheless choose this item, we can understand your decision, but cannot offer you any guarantee or exchange.
The light fulfills its purpose, but the lamp housing is susceptible to scratches and in some cases already shows slight damage from the factory. In addition, the reflector does not make a particularly high-quality impression.
Matching bulbs, lamp grilles and alternative front spotlights can be found in the accessories section.
Original Piaggio spare part number: 228999, 268074
Good-quality reproduction product from the Asian market.
Details
| Manufacturer | Quenching |
| Test mark | E3 |
| Material | Plastic |
| Tension | 12 V |
| Housing material | Plastic |
| Color | black, white |
| Performance | 21 W, 10 W |
| Switch included | Yes |
| Ø outside | 130 mm |
| Bulb holder | P26s, Soffit pear |
| Mounting type | Screws |
| Speedometer recording | 48 mm |
| Area of application | Standard |
| Number of fixing points | 2 pcs |
| Battery operated | No |
Suitable for the following models
| Piaggio | Si |
Accessories & related products
Tail light black | Piaggio SI
Height: 78 mm · Manufacturer: Made in Italy · Width: 100 mm · Material: Plastic · Test mark: none · Tension: 6 V · Tension: 12 V · Color: black · Color: red · Bulb holder: Soffit pear · Mounting type: Nuts & bolts · Number of fixing points: 1 pcs · Depth: 65 mm
24,70 EUR
66HEROES speedometer 60 km/h Ø 48 mm "mofakult" white
Depth: 50 mm · Manufacturer: 66HEROES · Material: Metal · Material: Plastic · Color: Chrome · Color: black · Surface: chrome-plated · Color: white · Ø Receptacle: 48 mm · Maximum speed: 60 Km/h · Thread type: MF10x1 (fine pitch thread) · Lighting: without · 4-edge speedometer cable: 2 mm · Total height: 70 mm · Ø outside: 52.4 mm
69,40 EUR
Moped fans like you also bought:
BERU spark plug connector / 1 kΩ interference suppressed
Manufacturer: BERU · Material: Sheet metal (steel) · Color: silver · Spark plug socket: M4 · Cable available: No · Suppressed: Yes · Resistance: 1000 Ω · Ø cable: 5 mm · Ø cable: 7 mm · Pony OEM number: A2099 · Sachs OEM no.: 0265 100 00
10,10 EUR
Stand set | Piaggio SI, Grillo
Manufacturer: Made in Italy · Material: Steel · Surface: varnished · Color: black · Stand base - center mount (A): 225 mm · Total width of stand base (B): 220 mm · Wide receptacle (C): 89 mm · Ø Receptacle (D): 14 mm · Wide upright foot (F): 20 mm · Total height: 265 mm
28,90 EUR
Fuel tap vertical M12x1 (with union nut) outgoing right | Piaggio SI
Manufacturer: Made in Italy · Possible lever positions: open / closed / reserve · Thread type: MF12x1 (fine pitch thread) · Material lever: Plastic · Mounting type: Union nut · Filter type: Plastic net · Installation direction: vertical / vertical · Outlet direction: right · Spare tube shape: straight · Ø fuel hose connection: 6 mm · Reserve level: 65 mm
14,40 EUR
Cable set black | Piaggio Ciao, SI, Bravo, Boxer
Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Nipple shape: Ball · Nipple shape: Barrel (transverse) · Nipple shape: Pears · Manufacturer: Made in Germany · Material: Steel · Quantity: 4 pcs · Total length: 1350 mm · Total length: 1600 mm · Total length: 2180 mm · Outer shell length: 1200 mm · Outer shell length: 1250 mm · Outer shell length: 1300 mm · Outer shell length: 2000 mm · Color: black
23,10 EUR
swiing® revival clamping screw front brake (version 2.0) | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Thread type: M7x1 (standard thread) · Ø Cable bushing: 2.1 mm · Drive: External hexagon · Total length: 21 mm · Screw head: Hexagon · Width across flats SW: 11 mm · Width across flats SW: 14 mm · Thread length: 9.5 mm · Ø shaft: 10.9 mm · Number of components: 3 pcs · Alternative version of the Piaggio OEM number: 27348
6,25 EUR
swiing® revival clamping screw rear brake (version 2.0) | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Thread type: M7x1 (standard thread) · Ø Cable bushing: 2.1 mm · Drive: External hexagon · Total length: 21.5 mm · Screw head: Hexagon · Width across flats SW: 11 mm · Width across flats SW: 14 mm · Thread length: 11 mm · Ø shaft: 10.5 mm · Number of components: 3 pcs · Alternative version of the Piaggio OEM number: 154533
6,75 EUR
Collection only possible with online purchase and appointment.
