Complete 12V HPI ignition with built-in 60W light coil suitable for the following mopeds with Beta 521 engine:
- Cilo 521
- Pony Cross 521
- Pony GTX
The small rotor results in better acceleration and throttle response.
Advantages of the HPI ignition:
- always a constant, strong spark
- no more misfires
- adjust once and never again
- little to no wear and tear
Included in delivery are installation instructions in English.
Attention:
Do not use screws that are too long to mount the impeller, otherwise the stator winding underneath may be damaged. You will find a suitable screw set for mounting in the accessories section.Branded product from the manufacturer HPI – Horse Power Ignition.
Details
| Ø cable | 7 mm |
| Manufacturer | HPI |
| Tension | 12 V |
| Performance | 60 W |
| Direction of rotation | left, right |
| Area of application | Tuning |
Suitable for the following models
| Pony / Cilo (Beta 521 & 512) | Beta 512 Beta 521 (Motor) |
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Temperature resistance (min.): -75 - 200 °C · Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Color: blue · Contents [ml]: 10 ml · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Area of application: Chemistry · Type of application: 1K · Gap dimension (max.): 0.01 mm · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
25,50 EUR
2.550,00 EUR/l
swiing® ingenious 280 g additional weight HPI Inox
Manufacturer: swiing® ingenious parts · Material: Chrome steel (stainless steel) · Surface: blank · Ø outside: 95 mm · Ø inside: 39 mm · Thickness: 12.5 mm · Ø mounting hole: 5.5 mm · Ø mounting hole: 10 mm · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Number of fixing points: 7 pcs · Weight: 300 g · Ø bolt circle: 50 mm · Ø bolt circle: 55 mm
58,00 EUR
swiing® ingenious fan wheel black (EVO, HPI, Bosch,Ducati) | Puch X30 Velux / Sachs 503 / Belmondo
Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: anodized · Color: black · Ø outside: 120 mm · Ø inside: 39 mm · Ø mounting hole: 5.5 mm · Ø mounting hole: 6 mm · Height: 13.5 mm · Number of fixing points: 10 pcs · Weight: 87 g · Ø bolt circle: 48 mm · Ø bolt circle: 70 mm · Ø bolt circle: 100 mm
69,60 EUR
swiing® ingenious 250 g additional weight HPI Inox | Puch X30 Velux / Sachs 503 / Belmondo
Manufacturer: swiing® ingenious parts · Material: Chrome steel (stainless steel) · Surface: blank · Ø outside: 117 mm · Ø inside: 71.8 mm · Thickness: 5 mm · Ø mounting hole: 5 mm · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Number of fixing points: 4 pcs · Weight: 250 g · Ø bolt circle: 101 mm
30,00 EUR
swiing® ingenious 100 g additional weight HPI Inox | Puch X30 Velux / Sachs 503 / Belmondo
Manufacturer: swiing® ingenious parts · Material: Chrome steel (stainless steel) · Surface: blank · Ø outside: 117 mm · Ø inside: 71.8 mm · Thickness: 1.8 mm · Ø mounting hole: 5 mm · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Number of fixing points: 4 pcs · Weight: 100 g · Ø bolt circle: 101 mm
23,10 EUR
swiing® ingenious fan wheel red (EVO, HPI, Bosch, Ducati) | Puch X30 Velux / Sachs 503 / Belmondo
Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: anodized · Color: red · Ø outside: 120 mm · Ø inside: 39 mm · Ø mounting hole: 6 mm · Height: 13.5 mm · Number of fixing points: 10 pcs · Weight: 87 g · Ø bolt circle: 48 mm · Ø bolt circle: 70 mm · Ø bolt circle: 100 mm
72,50 EUR
swiing® ingenious fan wheel chrome (EVO, HPI, Bosch, Ducati) | Puch X30 Velux, Sachs 503, Belmondo
Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: chrome-plated · Color: Chrome · Ø outside: 120 mm · Ø inside: 39 mm · Ø mounting hole: 6 mm · Height: 13.5 mm · Number of fixing points: 10 pcs · Weight: 87 g · Ø bolt circle: 48 mm · Ø bolt circle: 70 mm · Ø bolt circle: 100 mm
80,10 EUR
Moped fans like you also bought:
NGK B8ES spark plug long thread
Manufacturer: NGK · Candle designation: B8ES · Candle thread type: long · Thread type: MF14x1.25 (fine pitch thread) · Spark plug socket: M4 · Spark plug socket: SAE · Suppressed: No · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Width across flats SW: 21 mm
7,55 EUR
Airsal 43.5 mm cylinder kit Beta | Cilo Cross 521 / 512, Pony Cross 521, Pony GTX 521
Manufacturer: Airsal · Material: Aluminum · Surface: sandblasted · Crankshaft stroke: 39 mm · Displacement: 57 ccm · Ø cylinder neck: 45.5 mm · Ø Outlet outside: 18 mm · Ø Outlet outside: 21 mm · Nominal diameter: 43.5 mm · Ø piston pin (B): 12 mm · Number of fixing points: 4 pcs · Hole spacing outlet: 38 mm · Area of application: Tuning · Outlet type: straight · Thread outlet: M6x1 (standard thread) · Hole pattern [mm]: 48 · Camouflaged: No
232,40 EUR
swiing® ingenious fan wheel black (EVO, HPI, Bosch,Ducati) | Puch X30 Velux / Sachs 503 / Belmondo
Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: anodized · Color: black · Ø outside: 120 mm · Ø inside: 39 mm · Ø mounting hole: 5.5 mm · Ø mounting hole: 6 mm · Height: 13.5 mm · Number of fixing points: 10 pcs · Weight: 87 g · Ø bolt circle: 48 mm · Ø bolt circle: 70 mm · Ø bolt circle: 100 mm
69,60 EUR
swiing® ingenious fan wheel red (EVO, HPI, Bosch, Ducati) | Puch X30 Velux / Sachs 503 / Belmondo
Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: anodized · Color: red · Ø outside: 120 mm · Ø inside: 39 mm · Ø mounting hole: 6 mm · Height: 13.5 mm · Number of fixing points: 10 pcs · Weight: 87 g · Ø bolt circle: 48 mm · Ø bolt circle: 70 mm · Ø bolt circle: 100 mm
72,50 EUR
Collection only possible with online purchase and appointment.
