Complete ignition plate suitable for all HPI 210 ignitions on your moped
The base plate is made of black anodized aluminium.
Ø outer: 90 mm
Plug: Superseal
Cable length: 640 mm
Matching flywheels, plugs and cables can be found in the accessories section.
Branded product from the manufacturer HPI – Horse Power Ignition.
Details
Manufacturer | HPI |
Material | Aluminum |
Number of cables | 4 pcs |
Area of application | Performance, Racing, High End, Tuning |
Surface | anodized |
Color | black |
Tension | 12 V |
Performance | 60 W |
Ø inside | 27.5 mm |
Cable length | 640 mm |
Ø outside | 90 mm |
Number of fixing points | 6 pcs |
Ø bolt circle | 80 mm |
Suitable for the following models
Universal | |
Puch | |
Sachs | |
Zündapp Belmondo |
Accessories & related products
HPI racing ignition 12V with light 60W
Manufacturer: HPI · Material: Aluminum · Material: Steel · Tension: 12 V · Ø cable: 7 mm · Light coil voltage: 12 V · Ø Internal flywheel: 61.5 mm · Performance: 60 W · Direction of rotation: left · Direction of rotation: right · Ø mounting plate: 90 mm · Mounting type: Screws · Ø Flywheel outside: 71.5 mm · Number of fixing points: 6 pcs · Area of application: Tuning · Weight: 340 g
335,20 EUR
HPI flywheel (Bosch/Ducati)
Manufacturer: HPI · Material: Steel · Thread type: MF27x1 LH (fine/left-hand thread) · Direction of rotation: left · Direction of rotation: right · Ø cone small inside: 10.9 mm · Ø cone large inside: 15.8 mm · Ø Flywheel outside: 71.5 mm · Cone length: 28 mm · Cone ratio: 1:5
107,20 EUR
swiing® ingenious 280 g additional weight HPI Inox
Manufacturer: swiing® ingenious parts · Material: Chrome steel (stainless steel) · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Surface: blank · Thickness: 12.5 mm · Ø inside: 39 mm · Ø outside: 95 mm · Weight: 300 g · Number of fixing points: 7 pcs · Ø bolt circle: 50 mm · Ø bolt circle: 55 mm · Ø mounting hole: 5.5 mm · Ø mounting hole: 10 mm
55,80 EUR
HPI ignition box programmable (two ignition curves)
Manufacturer: HPI · Area of application: High End · Area of application: Performance · Material: Plastic · Area of application: Racing · Area of application: Tuning · Color: red · Total length: 63 mm · Width: 100 mm · Height: 28 mm · Number of fixing points: 2 pcs · Hole spacing: 80 mm · Ø mounting hole: 7.5 mm
343,60 EUR
Moped fans like you also bought:
BERU spark plug connector / 1 kΩ interference suppressed
Manufacturer: BERU · Material: Sheet metal (steel) · Color: silver · Ø cable: 5 mm · Ø cable: 7 mm · Spark plug socket: M4 · Cable available: No · Suppressed: Yes · Resistance: 1000 Ω · Pony spare part no.: A2099 · Sachs spare part no.: 0265 100 00
9,75 EUR
Magura cable clamp Ø 8 x 15 mm
Manufacturer: Magura · Material: Brass · Area of application: Standard · Material: Steel · Surface: galvanized (blue) · Surface: nickel-plated · Thread type: M6x1 (standard thread) · Ø Cable bushing: 2.3 mm · Drive: External hexagon · Drive: Slot · Total length: 15 mm · Screw head: Hexagon · Ø Bundle: 6 mm · Width across flats SW: 7 mm · Ø outside: 8 mm · Thread length: 7 mm
2,80 EUR
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Thread type: M4x0.7 (standard thread) · Ø Cable bushing: 1.6 mm · Drive: Slot · Screw head: Lens head · Ø outside: 5 mm · Total length: 6 mm · Thread length: 4 mm · Number of components: 2 pcs
2,25 EUR
swiing® revival wheel axle set M12x1 x 185 cast rear wheel galvanized | Puch
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Thread type: MF12x1 (fine pitch thread) · Width across flats SW: 19 mm · Ø outside: 11.8 mm · Ø shaft: 11.9 mm · Total length: 185 mm · Shank length: 100 mm · Thread length: 26 mm · Thread length: 52.5 mm
16,70 EUR
HPI flywheel (Bosch/Ducati)
Manufacturer: HPI · Material: Steel · Thread type: MF27x1 LH (fine/left-hand thread) · Direction of rotation: left · Direction of rotation: right · Ø cone small inside: 10.9 mm · Ø cone large inside: 15.8 mm · Ø Flywheel outside: 71.5 mm · Cone length: 28 mm · Cone ratio: 1:5
107,20 EUR
swiing® revival gasket gearbox cover engine 1 mm | Puch E50
Manufacturer: swiing® revival parts · Material: Sealing paper · Color: sand-colored · Thickness: 1 mm · Ø inside: 106 mm · Ø outside: 116 mm · Number of fixing points: 4 pcs · Number of components: 1 pcs · Alternative version of the Puch spare part no.: 349.1.10.349.1
4,35 EUR