HS-Retro shift sleeve Z50 (1A quality) | Puch X30 NS, NL

Inner cable Ø 1.2 mm x 200 cm with barrel nipple Ø 6 mm

Ø nipple: 6 mm · Nipple length: 5.5 mm · Manufacturer: Made in Germany · Material: Brass · Material: Steel · Area of application: Standard · Surface: blue galvanized · Ø Stranded wire: 1.2 mm · Nipple shape: Barrel (transverse) · Cable length: 2000 mm · Number of components: 1 pcs

O-ring selector shaft Z50

Ø inside: 8.3 mm · Ø outside: 13.1 mm · Manufacturer: Puch · Material: NBR · Color: black · Number of components: 1 pcs · Cord thickness: 2.4 mm · Place of use: Shift shaft · Hardness [Shore]: 70 Shore

swiing® ingenious spring gearshift (reinforced, +20%) Inox | Puch X30 Z50

Manufacturer: swiing® ingenious parts · Material: Chrome steel (stainless steel)

swiing® revival shift arm Z50 engine | Puch X30 Sport

Manufacturer: swiing® revival parts · Material: Aluminum · Surface: anodized · Puch spare part no.: 349.2.14.217.1

Magura cable clamp Ø 7 x 9 mm

Manufacturer: Magura · Material: Chrome steel (stainless steel) · Material: Steel · Area of application: Standard · Surface: blank · Surface: blue galvanized · Thread type: M4x0.7 (standard thread) · Total length: 9 mm · Total length: 14.5 mm · Ø Cable bushing: 2.5 mm · Drive: External hexagon · Drive: Slot · Screw head: Countersunk head · Screw head: Hexagon · Width across flats SW: 6 mm · Ø outside: 7 mm · Thread length: 6 mm · Number of components: 1 pcs

swiing® revival shift shaft | Puch Z50

Manufacturer: swiing® revival parts · Material: Steel · Surface: gas nitrided · Recording type: 2-edge · Thread type: M5x0.8 (standard thread) · Puch spare part no.: 320.1.14.002.1

Athena 40 mm cylinder kit aluminum | Peugeot 103 VOGUE T, L

Manufacturer: Athena · Area of application: Tuning · Material: Aluminum · Surface: sandblasted · Camouflaged: No · Nominal diameter: 40 mm · Number of fixing points: 4 pcs · Ø piston pin (B): 12 mm · Outlet type: Union nut · Outlet type: slanted

swiing® revival protective cap shift paddle black | Puch X30 Z50

Manufacturer: swiing® revival parts · Material: Plastic · Color: black

swiing® revival protective cap shift paddle gray | Puch X30 Z50

Manufacturer: swiing® revival parts · Material: Plastic · Color: gray

HS-Retro pinion shaft | Puch X30 NS, NL (1A quality)

Manufacturer: HS-Retro · Material: Steel · Surface: hardened & ground · Recording type: Interlocking · Ø outside: 12.35 mm · Ø outside: 16.75 mm · Total length: 90.5 mm · Puch spare part no.: 350.2.13.020.1

swiing® revival gasket set Z50 engine | Puch X30 NS / NL

Manufacturer: swiing® revival parts · Area of application: Standard · Material: Sealing paper · Ø outlet inside: 22 mm · Hole spacing inlet: 32 - 38 mm · Number of components: 10 pcs · Hole pattern [mm]: 44 x 44 · Hole spacing outlet: 42 mm

swiing® revival shift arm Z50 engine | Puch X30 Sport

Manufacturer: swiing® revival parts · Material: Aluminum · Surface: anodized · Puch spare part no.: 349.2.14.217.1

swiing® revival engine gasket | Puch Z50 engine X30 NS, NL

Ø inside: 74 mm · Manufacturer: swiing® revival parts · Material: Sealing paper · Color: sand-colored · Total length: 240 mm · Width: 167 mm · Thickness: 0.4 mm · Number of fixing points: 12 pcs · Number of components: 1 pcs

66HEROES Centering screw M22x1 Inox | Puch Z50

Manufacturer: 66HEROES · Material: Chrome steel (stainless steel) · Surface: polished · Drive: External hexagon · Width across flats SW: 27 mm · Thread type: MF22x1 (fine pitch thread) · Puch spare part no.: 050.1.1233

swiing® revival tank mount chrome | Puch X30 Velux, Sport

Manufacturer: swiing® revival parts · Material: Chrome steel (stainless steel) · Color: Chrome · Surface: raw · Mounting type: Nuts & bolts · Number of fixing points: 2 pcs

swiing® revival drawbar 2-slats High End | Puch Z50

Manufacturer: swiing® revival parts · Area of application: High End · Material: Aluminum · Material: Steel · Color: black · Color: red · Surface: anodized · Surface: blackened · Total length: 35 mm · Ø outside: 44.8 mm

Gearwheel 2nd gear 18 teeth NOS | Puch (40 km/h version)

Manufacturer: Puch · Toothing type: straight toothed · Number of teeth: 18 pcs

HS-Retro gearwheel 1st gear 28 teeth (1A quality) | Puch X30 NS, NL

Ø inside: 12.4 mm · Manufacturer: HS-Retro · Material: Steel · Toothing type: straight toothed · Ø axle: 12.4 mm · Number of teeth: 28 pcs · Ø outside: 54 mm · Puch spare part no.: 350.1.13.011.1

HS-Retro gearwheel 2nd gear 23 teeth (1A quality) | Puch X30 NS, NL

Ø inside: 17.2 mm · Manufacturer: HS-Retro · Material: Steel · Toothing type: straight toothed · Ø axle: 17.2 mm · Number of teeth: 23 pcs · Ø outside: 45 mm · Puch spare part no.: 350.1.13. 112.1

HS-Retro pinion shaft | Puch X30 NS, NL (1A quality)

Manufacturer: HS-Retro · Material: Steel · Surface: hardened & ground · Recording type: Interlocking · Ø outside: 12.35 mm · Ø outside: 16.75 mm · Total length: 90.5 mm · Puch spare part no.: 350.2.13.020.1