Black, adjustable shock absorbers for your moped, moped and small motorcycle.
The hardness or preload of the shock absorbers can be adjusted using the special spring mount.
Length (mount - mount): 320 mm
Ø outer coil spring: 44 mm
Ø spars: 28 mm
Ø bushings for fastening: 10 mm
The rear springs should always be secured with large washers to prevent the plastic bushings from shifting if lateral forces occur.
The scope of delivery corresponds to one pair.
Rear springs from other manufacturers, the matching adjustment key as well as the washers and fastening material can be found in the accessories section.
Quality product from the Italian manufacturer IMCA.
Details
| Manufacturer | IMCA |
| Material | Steel |
| Surface | varnished |
| Damping type | Spring |
| Adjustable | Yes |
| Color | black |
| Ø outside | 44 mm |
| Ø spars | 28 mm |
| Mounting type | Nuts & bolts |
| Number of fixing points | 2 pcs |
| Ø Fastening inside | 10 mm |
| Total length | 320 mm |
Accessories & related products
IMCA shock absorber 30 cm chrome
Ø outside: 45 mm · Manufacturer: IMCA · Material: Steel · Damping type: Spring · Adjustable: Yes · Surface: chrome-plated · Color: Chrome · Ø spars: 28 mm · Mounting type: Nuts & bolts · Number of fixing points: 2 pcs · Ø Fastening inside: 10 mm · Total length: 300 mm
59,20 EUR
Loctite 243 medium-strength threadlocker 10 ml
Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Contents [ml]: 10 ml · Area of application: Chemistry · Color: blue · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Temperature resistance (min.): -75 - 200 °C · Type of application: 1K · Gap dimension (max.): 0.01 mm · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
25,50 EUR
2.550,00 EUR/l
YSS shock absorber Racing 30 cm (oil pressure)
Ø outside: 52 mm · Manufacturer: YSS · Material: Steel · Damping type: Hydraulic (oil) · Adjustable: Yes · Surface: varnished · Color: black · Ø spars: 32 mm · Mounting type: Nuts & bolts · Number of fixing points: 2 pcs · Ø Fastening inside: 10 mm · Total length: 330 mm
162,60 EUR
IMCA shock absorber 30 cm chrome / black
Ø outside: 45 mm · Manufacturer: IMCA · Material: Steel · Damping type: Spring · Adjustable: Yes · Surface: chrome-plated · Surface: varnished · Color: Chrome · Color: black · Ø spars: 28 mm · Mounting type: Nuts & bolts · Number of fixing points: 2 pcs · Ø Fastening inside: 10 mm · Total length: 300 mm
69,60 EUR
Moped fans like you also bought:
Not so nice 
Chrome luggage rack | Puch Maxi S
Material: Steel · Surface: chrome-plated · Wheel size [inch]: 17 " · Color: Chrome · Mounting type: Nuts & bolts · Number of fixing points: 4 pcs · Hole spacing: 29 mm · Ø mounting hole: 8.3 mm · Ø mounting hole: 9 mm · Total length: 425 mm · Width: 168 mm · Height: 32.5 mm
23,10 EUR
Spotlight round Ø 13 cm chrome / black
Ø outside: 130 mm · Material: Sheet metal (steel) · Test mark: none · Bulb holder: BA15d · Housing material: Metal · Area of application: Standard · Thread size: M6 · Lens material: Plastic · Surface: chrome-plated · Surface: varnished · Color: Chrome · Color: black · Color: transparent · Speedometer recording: None · Mounting type: Screws · Switch included: No · Number of fixing points: 2 pcs · Battery operated: No · Depth: 80 mm · Width: 134 mm · Height: 147 mm
28,90 EUR
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Possible lever positions: open / closed / reserve · Material lever: Metal · Filter type: Plastic net · Installation direction: horizontal / horizontal · Outlet direction: below · Mounting type: Union nut · Spare tube shape: curved · Ø fuel hose connection: 6 mm · Reserve level: 70 mm · Thread type: MF12x1 (fine pitch thread)
11,50 EUR
swiing® revival side protection screw set black | Puch Maxi S
Drive: Slot · Drive: Triangular head · Total length: 47 mm · Total length: 60 mm · Manufacturer: swiing® revival parts · Thread length: 35 mm · Thread length: 50 mm · Material: Plastic · Material: Steel · Surface: galvanized (blue) · Surface: raw · Color: silver · Thread type: M5x0.8 (standard thread)
15,00 EUR
Collection only possible with online purchase and appointment.
