Gasket for the intake manifold for Cilo 502t engines.
Hole spacing: 32 mm
Ø inside: 14.5 mm
Thickness: 0.45 mm
This flange gasket is made of paper and is of the highest quality.
The set includes the following fixed parts:
Details
Material | Oiled paper |
Place of use | Admission |
Hole spacing inlet | 32 mm |
Ø outlet inside | 14.5 mm |
Thickness | 0.45 mm |
Suitable for the following models
Cilo | 502 / 502t |
Accessories & related products
swiing® ingenious 16 mm intake manifold | Cilo 502
Manufacturer: swiing® ingenious parts · Ø inside: 16 mm · Material: Aluminum · Surface: anodized · Color: black-matt · Hole spacing inlet: 32 mm · Area of application: Tuning · Mounting type: Screws · Ø External connection: 19 mm · Number of fixing points: 2 pcs
54,50 EUR
swiing tuning cylinder 40 mm | Cilo 502
Nominal diameter: 40 mm · Manufacturer: swiing · Material: Gray cast iron · Surface: sandblasted · Area of application: Tuning · Thread inlet: M6x1 (standard thread) · Ø piston pin (B): 12 mm · Outlet type: Union nut · Number of fixing points: 4 pcs · Camouflaged: Yes
206,70 EUR
Moped fans like you also bought:
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø Stranded wire: 1.25 mm · Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Number of components: 1 pcs · Material: Steel · Surface: blue galvanized · Nipple shape: Cylinder · Area of application: Standard · Cable length: 2200 mm
3,15 EUR
Fortune / Merrick 2.00-2.50 x 16/17" inner tube
Manufacturer: Fortune · Tire width [inch]: 2 - 2.5 " · Tire width [mm]: 50.8 - 63.5 · Wheel size [inch]: 16 - 17 " · Wheel size [inch]: 17 " · Width [inch]: 2 · Width [inch]: 2 1/4 · Width [inch]: 2 1/2 · Old designation: 20 x 2 · Old designation: 20 x 2.25 · Old designation: 20 x 2.5 · Old designation: 21 x 2 · Old designation: 21 x 2.25 · Old designation: 21 x 2.5 · Tire height [%]: 100 · Valve type: TR4 Auto valve
11,10 EUR
GPO 85° carburetor pipe bend brass M6x0.75
Manufacturer: GPO · Material: Brass · Angle: 85 ° · Ø outside: 6 mm · Height: 30 mm · Internal thread: MF6x0.75 (fine pitch thread) · Thread type: MF6x0.75 (fine pitch thread) · Total length: 45.5 mm · Total length: 53.5 mm · Width across flats nut: 8 mm · Pony spare part no.: A2066 · Sachs spare part no.: 0261 132 000
6,60 EUR
Dell'Orto 90° carburetor pipe bend set M6x0.75
Manufacturer: Dell'Orto · Material: Brass · Surface: nickel-plated · Angle: 90 ° · Total length: 43 mm · Total length: 52 mm · Ø outside: 6 mm · Height: 27 mm · Internal thread: MF5x0.75 (fine pitch thread) · Thread type: MF6x0.75 (fine pitch thread) · Width across flats nut: 7 mm
13,30 EUR
Dell'Orto 50° carburetor elbow set M6x0.75
Manufacturer: Dell'Orto · Material: Brass · Surface: nickel-plated · Angle: 50 ° · Total length: 36.5 mm · Total length: 42 mm · Ø outside: 6 mm · Height: 40 mm · Height: 48 mm · Internal thread: MF5x0.75 (fine pitch thread) · Thread type: MF6x0.75 (fine pitch thread) · Width across flats nut: 7 mm
13,30 EUR
Fuel tap vertical M10x1 (to screw in) outgoing at the bottom / cast iron
Manufacturer: Made in Italy · Possible lever positions: open / closed / reserve · Material lever: Metal · Thread type: MF10x1 (fine pitch thread) · Filter type: Plastic net · Ø fuel hose connection: 6 mm · Installation direction: vertical / vertical · Outlet direction: below · Mounting type: screw in (thread) · Spare tube shape: straight · Reserve level: 65 mm
16,70 EUR