White 6 - 24V LED light with 2-pin bayonet mount for headlights on various mopeds, mopeds and small motorcycles. The BAX15d bulb is ideal for use in front lights with high beam and low beam.
Thanks to the voltage range of 6 to 24 volts, the LED bulb can be operated with both 6 volt contact ignitions and 12 volt electronic ignitions.
The short design means that the LED bulb fits into any headlight without protruding from the front of the glass. The LED bulb is equipped with a total of twelve diodes, four of which are aligned to the front and the remaining eight to the side.
The output is 2.4 LED watts, which according to the rule of thumb conversion corresponds to around 15 bulb watts. The color temperature is specified by the manufacturer as 6000 K (Kelvin) and the brightness as 600 Lm (lumen).
Note: Despite the maximum voltage of 24 volts of the LED light source, the installation of a 12 V voltage regulator is essential for electronic ignitions, as higher voltage peaks can occur depending on the ignition.
You can find the right voltage limiter in addition to other bulbs and bulbs in the accessories section.
Details
| Test mark | none |
| Bulb holder | BAX15d |
| Color | white |
| Tension | 6 V, 12 V, 24 V |
| Ø base | 15 mm |
| Total length | 45 mm |
| Ø Lamp head | 18 mm |
| Resonance | Yes |
Accessories & related products
Hot 
Leonelli 12V voltage regulator (1A quality)
Total length: 50 mm · Manufacturer: Leonelli · Material: Aluminum · Material: Plastic · Surface: blue galvanized · Type of current: Alternating current (AC) · Tension: 12 V · Performance: 100 W · Width: 27 mm · Ø mounting hole: 6 mm · Height: 15 mm · Mounting type: Screws
39,00 EUR
12V LED set (BAX15d) with Leonelli voltage regulator | Puch
Manufacturer: Leonelli · Test mark: none · Bulb holder: BA9s · Bulb holder: BAX15d · Tension: 12 V · Color: red · Color: white · Ø base: 9 mm · Ø base: 15 mm · Total length: 22 mm · Total length: 45 mm · Ø Lamp head: 9.5 mm · Ø Lamp head: 18 mm · Resonance: Yes
59,10 EUR
6V LED set (BAX15d) with Leonelli voltage regulator | Puch
Manufacturer: Leonelli · Test mark: none · Bulb holder: BA9s · Bulb holder: BAX15d · Tension: 6 V · Total length: 22 mm · Total length: 45 mm · Ø base: 9 mm · Ø base: 15 mm · Color: red · Color: white · Ø Lamp head: 9.5 mm · Ø Lamp head: 18 mm · Resonance: Yes
59,10 EUR
Moped fans like you also bought:
Motorex Automatic Motor Oil (ATF) 450 ml
Temperature resistance (min.): -45 - 200 °C · Manufacturer: Motorex · Area of application: Gearbox lubrication with clutch · Gearbox type: Automatic machine · Contents [ml]: 450 ml · Pony spare part no.: A2080 · Sachs spare part no.: 0263 014 002
11,10 EUR
24,67 EUR/l
Hot
Leonelli 12V voltage regulator (1A quality)
Total length: 50 mm · Manufacturer: Leonelli · Material: Aluminum · Material: Plastic · Surface: blue galvanized · Type of current: Alternating current (AC) · Tension: 12 V · Performance: 100 W · Width: 27 mm · Ø mounting hole: 6 mm · Height: 15 mm · Mounting type: Screws
39,00 EUR
Hot
Leonelli 6V voltage regulator (1A quality)
Total length: 50 mm · Manufacturer: Leonelli · Material: Aluminum · Material: Plastic · Surface: raw · Tension: 6 V · Performance: 50 W · Type of current: Alternating current (AC) · Ø mounting hole: 6 mm · Width: 27 mm · Height: 15 mm · Mounting type: Screws
33,40 EUR
12V LED set (BAX15d) with Leonelli voltage regulator | Puch
Manufacturer: Leonelli · Test mark: none · Bulb holder: BA9s · Bulb holder: BAX15d · Tension: 12 V · Color: red · Color: white · Ø base: 9 mm · Ø base: 15 mm · Total length: 22 mm · Total length: 45 mm · Ø Lamp head: 9.5 mm · Ø Lamp head: 18 mm · Resonance: Yes
59,10 EUR
6V LED set (BAX15d) with Leonelli voltage regulator | Puch
Manufacturer: Leonelli · Test mark: none · Bulb holder: BA9s · Bulb holder: BAX15d · Tension: 6 V · Total length: 22 mm · Total length: 45 mm · Ø base: 9 mm · Ø base: 15 mm · Color: red · Color: white · Ø Lamp head: 9.5 mm · Ø Lamp head: 18 mm · Resonance: Yes
59,10 EUR
Collection only possible with online purchase and appointment.
