Practical travel bag for mounting on the luggage rack of your Piaggio Ciao moped / moped.
The shapely single bag made of gray imitation leather and red textile cover can be mounted on the side of the luggage rack. To do this, the sacoche is simply hooked into the luggage rack bar and attached to the strut or frame using the tension spring. The luggage bag can also be attached to additional luggage racks with round bars up to Ø 13 mm.
The tool bag impresses with its good quality. On the spoked wheel models with the old luggage carrier shape, the fit is very good; on newer models, the middle hook with the spring may need to be modified or padded (presses on the strut of the luggage carrier).
Dimensions of the individual side bag:
Length: 31 cm
Width: 9.5 cm
Height: 23 cm
Hook spacing: 12.5 - 16.5 cm
You can find more transport bags in the accessories section.
Details
Material | Imitation leather, Textile |
Color | red, gray |
Mounting type | suspended |
Number of fixing points | 5 pcs |
Total length | 310 mm |
Width | 95 mm |
Height | 230 mm |
Hook distance | 125 mm, 165 mm |
Suitable for the following models
Piaggio | Ciao - Ciao, Ciao, Ciao, Ciao |
Accessories & related products
Luggage carrier Classic Chrome | Piaggio Ciao P
Manufacturer: Made in Italy · Material: Steel · Surface: chrome-plated · Ø mounting hole: 6.5 mm · Total length: 575 mm · Number of fixing points: 4 pcs · Height: 100 mm · Width: 140 mm · Mounting type: Nuts & bolts · Mounting type: Screws · Hole spacing: 85 mm · Hole spacing: 135 mm · Color: Chrome · Piaggio spare part no.: 114151
122,80 EUR
Luggage carrier chrome | Piaggio Ciao P
Manufacturer: Made in Italy · Material: Steel · Surface: chrome-plated · Ø mounting hole: 6.5 mm · Ø mounting hole: 9 mm · Total length: 500 mm · Number of fixing points: 4 pcs · Height: 100 mm · Width: 165 mm · Mounting type: Nuts & bolts · Mounting type: Screws · Hole spacing: 60 mm · Hole spacing: 131 mm · Color: Chrome
111,70 EUR
Moped fans like you also bought:
Clutch cable / brake cable Ø 1.5 mm x 225 cm (pear-shaped nipple)
Ø nipple: 3.5 mm · Ø nipple: 6 mm · Nipple length: 10 mm · Manufacturer: Made in Germany · Material: Steel · Surface: blue galvanized · Number of components: 1 pcs · Ø Stranded wire: 1.5 mm · Nipple shape: Pears · Cable length: 2250 mm · Area of application: Standard · Piaggio spare part no.: 270460
2,70 EUR
Stand set | Piaggio SI
Manufacturer: Made in Italy · Material: Steel · Surface: varnished · Color: black · Stand base - center mount (A): 225 mm · Total width of stand base (B): 220 mm · Wide receptacle (C): 89 mm · Ø Receptacle (D): 14 mm · Wide upright foot (F): 20 mm · Total height: 265 mm
27,80 EUR
Fuel tap vertical M12x1 (with union nut) outgoing right | Piaggio SI
Manufacturer: Made in Italy · Possible lever positions: open / closed / reserve · Material lever: Plastic · Thread type: MF12x1 (fine pitch thread) · Filter type: Plastic net · Installation direction: vertical / vertical · Outlet direction: right · Spare tube shape: straight · Ø fuel hose connection: 6 mm · Reserve level: 65 mm · Mounting type: Union nut
13,90 EUR
swiing® revival clamping screw front brake (version 2.0) | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: swiing® revival parts · Material: Steel · Surface: blue galvanized · Thread type: M7x1 (standard thread) · Number of components: 3 pcs · Ø Cable bushing: 2.1 mm · Drive: External hexagon · Screw head: Hexagon · Width across flats SW: 11 mm · Width across flats SW: 14 mm · Ø shaft: 10.9 mm · Total length: 21 mm · Thread length: 9.5 mm
6,05 EUR