Parts from ESJOT
ESJOT chains, sprockets and pinions - drive technology for the highest demands
ESJOT Antriebstechnik GmbH has been synonymous with high-quality sprocket technology for almost 100 years. The specialist for industrial and two-wheel sprockets is known for its innovative manufacturing processes, to which the drive parts for mopeds owe their special resistance, robustness and precision.
Sort:
ESJOT sprocket 45 teeth 4-hole coaster black
Manufacturer: ESJOT · Material: Steel · Surface: powder-coated · Chain pitch: 1/2" x 3/16" · Chain type: 415H · Number of teeth: 45 pcs · Ø bolt circle: 105 mm · Ø inside: 94 mm · Ø mounting hole: 6.4 mm · Thickness: 4.5 mm · Hole spacing: 74 mm · Number of fixing points: 4 pcs · Color: black
67,00 EUR
ESJOT sprocket 34 teeth 4-hole coaster black
Ø inside: 94 mm · Manufacturer: ESJOT · Material: Steel · Color: black · Surface: powder-coated · Chain type: 415H · Chain pitch: 1/2" x 3/16" · Number of teeth: 34 pcs · Number of fixing points: 4 pcs · Thickness: 4.5 mm · Ø mounting hole: 6.4 mm · Hole spacing: 74 mm · Ø bolt circle: 105.5 mm
59,10 EUR
ESJOT sprocket 40 teeth 4-hole coaster black
Ø inside: 94 mm · Manufacturer: ESJOT · Material: Steel · Color: black · Surface: powder-coated · Chain type: 415H · Chain pitch: 1/2" x 3/16" · Number of teeth: 40 pcs · Number of fixing points: 4 pcs · Thickness: 4.5 mm · Ø mounting hole: 6.4 mm · Hole spacing: 74 mm · Ø bolt circle: 105.5 mm
61,40 EUR
ESJOT sprocket 37 teeth 4-hole coaster black
Ø inside: 94 mm · Manufacturer: ESJOT · Material: Steel · Color: black · Surface: powder-coated · Chain type: 415H · Chain pitch: 1/2" x 3/16" · Number of teeth: 37 pcs · Number of fixing points: 4 pcs · Thickness: 4.1 mm · Ø mounting hole: 6.4 mm · Hole spacing: 74 mm · Ø bolt circle: 105.5 mm
59,10 EUR
ESJOT sprocket 42 teeth 4/5/6 hole Ø 98 mm cranked black
Ø inside: 98 mm · Manufacturer: ESJOT · Material: Steel · Color: black · Surface: powder-coated · Chain type: 415H · Chain pitch: 1/2" x 3/16" · Number of teeth: 42 pcs · Number of fixing points: 4 pcs · Thickness: 4.3 mm · Number of fixing points: 5 pcs · Number of fixing points: 6 pcs · Ø mounting hole: 6.5 mm · Cranking (offset): 12 mm · Ø bolt circle: 115 mm
33,40 EUR
ESJOT sprocket 40 teeth Grimeca (4-hole) galvanized
Ø inside: 98 mm · Manufacturer: ESJOT · Material: Steel · Color: silver · Surface: blue galvanized · Chain type: 415H · Chain pitch: 1/2" x 3/16" · Number of teeth: 40 pcs · Number of fixing points: 4 pcs · Cranking (offset): 9 mm · Ø bolt circle: 115 mm
39,00 EUR
Page 1 of 10
Precision and maximum robustness for optimum running properties
Drive chains, sprockets, chain wheels, steel teeth - drive technology parts are subjected to extreme thermal and mechanical forces every time they are driven. The wear on parts of this assembly is correspondingly high, and only a few drive parts can withstand these high loads as durably as chains, sprockets and pinions from ESJOT. Precisely manufactured from high-quality materials and using innovative processes, the drive parts not only withstand the extreme thermal and mechanical loads, they also improve the running characteristics of your drive. That's why there's no question that we offer you a large selection of precision parts from the manufacturer ESJOT in our shop.
Steel teeth from ESJOT for the highest demands
Do you appreciate top quality? Then drive chains, sprockets and pinions from ESJOT are the right choice for you and your moped. The manufacturer is one of Europe's largest original equipment manufacturers in the drive technology segment and has been cooperating with renowned vehicle manufacturers for decades. Piaggio, Tomos and Zündapp all rely on the top products from the specialist for drive technology. The manufacturer was the original equipment manufacturer for Kreidler, Hercules and Sachs during the golden age of mopeds. Even in the past, the manufacturer came to the fore with innovative manufacturing processes and regularly brought parts onto the market that were unrivalled in terms of precision and robustness. To guarantee high reliability and a long service life, ESJOT uses high-alloy steels with high wear resistance. Another advantage of the high-quality materials: these chains are more resistant to stretching, so you don't have to reach for tools to tighten the chain as often. If you are active in racing and want to save every extra gram on your racing bike, then the manufacturer's precision aluminium parts are the right choice for you. Compared to conventional steel sprockets, the weight of the lightweight aluminium sprockets is up to 60 percent lower. If, on the other hand, you prefer to ride quietly, we also offer the manufacturer's sprockets with a rubber coating. You will be amazed at how quietly your moped runs when you use one of the sprockets with a rubberised coating.
Tradition meets innovation at ESJOT
The manufacturer ESJOT from the small German town of Ense-Höingen has legendary expertise when it comes to sprockets, drive chains and teeth made of steel. The company can look back on almost a hundred years of successful history. Parts for drive technology have been manufactured in North Rhine-Westphalia since 1924. The manufacture of chains, sprockets and toothed components is extremely demanding, as the parts must fulfil the highest standards in terms of robustness and precision. ESJOT Antriebstechnik GmbH has built up a unique reputation in this field over the course of the company's long history. The success of this company and the high esteem in which its products are held can be seen from the fact that ESJOT is an original equipment manufacturer for many renowned vehicle brands. A special feature of the company's history is its innovative strength and its determination to continue improving even tried-and-tested parts. The drive specialist's most recent exclamation mark was undoubtedly the Diamond Cut process, which took sprocket production to a new level. This process uses state-of-the-art precision tools that ensure an optimised cutting pattern, and these sprockets also have a higher degree of hardness in the tooth flank area, which further minimises wear.
ESJOT: Improve running properties and reduce maintenance costs
If you opt for chains, sprockets or chain wheels from the manufacturer ESJOT, then you are making a decision in favour of absolute quality. Not only will you save yourself a lot of effort, as the maintenance effort is significantly reduced, but the running properties of your moped will also improve noticeably. Discover the high-quality chains, sprockets and chain wheels for your Kreidler, Puch, Pony, Clio, Sachs, Zündapp, Hercules or Tomos moped in our range. The manufacturer's robust and additionally reinforced drive technology is exactly the right choice for you, especially if you like travelling faster and have boosted the performance of your moped with one or two tuning conversions.
Related & alternative part manufacturers
Collection only possible with online purchase and appointment.
