Clutch springs suitable for the KTM SX50 clutch for Puch Maxi mopeds with E50 engine.
Specially developed for racing purposes. Designed for the highest loads.
The set consists of 3 springs and 3 washers.
The clutches engage at approx. 7000 - 9000 rpm, depending on the oil, etc.
In order to change the clutch engagement speed, the enclosed shims can be installed. This increases the clutch engagement speed by approx. 500 rpm.
The springs are made of stainless steel and can withstand temperatures of up to 240 degrees.
You can find other spring strengths in our range.
Details
Spring design | Pressure spring |
Manufacturer | MBR |
Material | Spring steel |
Area of application | Racing |
Color | red |
Number of components | 6 pcs |
Suitable for the following models
Puch | E50 |
Moped fans like you also bought:
swiing nozzle set M3.5 (64 - 74) Bing SRE, SRA, SRC, SRF
Manufacturer: swiing · Component group Carburetor: Spraying · Material: Brass · Quantity: 6 pcs · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Nozzle type: Main nozzle · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle size: 64 · Nozzle size: 66 · Nozzle size: 68 · Nozzle size: 70 · Nozzle size: 72 · Nozzle size: 74 · Total length: 6 mm · Drive: Slot
18,40 EUR
NGK CR6 Racing ignition cable & plug High End red
Manufacturer: NGK · Material: Rubber · Color: red · Ø cable: 7 mm · Cable available: Yes · Cable length: 1000 mm · Suppressed: Yes · Resistance: 5000 Ω · Component group Carburetor: Carburetor complete · Component group Carburetor: Spraying
46,10 EUR
swiing® revival stud bolt set M6 x 106 mm | Puch
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Diameter: 5.9 mm · Thread type: M6x1 (standard thread) · Total length: 106 mm · Thread length: 13 mm · Thread length: 18.5 mm · Width across flats SW: 10 mm · Drive: External hexagon · Alternative version of the Puch OEM number: 360.1.10.034.1
8,55 EUR
Athena 38 mm cylinder kit incl. diaphragm | Puch
Nominal diameter: 38 mm · Manufacturer: Athena · Material: Aluminum · Surface: sandblasted · Displacement: 50 ccm · Crankshaft stroke: 43 mm · Thread inlet: M5x0.8 (standard thread) · Ø piston pin (B): 12 mm · Outlet type: straight · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread) · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 44 · Camouflaged: No · Area of application: Tuning
231,00 EUR