37.97 mm piston with two 2 mm rectangular piston rings with flank lock (FS) suitable for Sachs 504/2 ACH and 504/1 ACH mopeds / mopeds.
The detailed dimensions of the piston according to the technical drawing can be found in the details. You can also find out about the relevant piston rings, their positions and locking types on the legend in the images.
Tolerance type: A
The piston kit contains piston pins, piston clips and piston rings.
You will find the corresponding assembly tool, piston pin locks and, if necessary, the corresponding cylinder in the accessories section.
Original Sachs spare part number: A4358
Quality product from the Italian manufacturer Meteor.
Details
Nominal diameter | 38 mm |
Manufacturer | Meteor |
Ø outside piston (A) | 37.97 mm |
Compression height (C) | 28 mm |
Curvature (D) | 3 mm |
Total piston height (E) | 53 mm |
Number of piston rings (F) | 2 pcs |
Piston ring mold | Rectangular ring |
Piston ring impact | Flank safety device (FS) |
Piston ring height | 2 mm |
Ø piston pin (B) | 12 mm |
Suitable for the following models
Sachs | 504 (ohne Tretwelle) |
Accessories & related products
Meteor piston 37.98 mm type B | Sachs 504
Nominal diameter: 38 mm · Manufacturer: Meteor · Ø outside piston (A): 37.98 mm · Ø piston pin (B): 12 mm · Compression height (C): 28 mm · Curvature (D): 3 mm · Total piston height (E): 53 mm · Number of piston rings (F): 2 pcs · Piston ring mold: Rectangular ring · Piston ring impact: Flank safety device (FS) · Piston ring height: 2 mm · Tolerance group: B
63,00 EUR
Meteor piston 37.99 mm type C | Sachs 504
Nominal diameter: 38 mm · Manufacturer: Meteor · Ø outside piston (A): 37.99 mm · Ø piston pin (B): 12 mm · Compression height (C): 28 mm · Curvature (D): 3 mm · Total piston height (E): 53 mm · Number of piston rings (F): 2 pcs · Piston ring mold: Rectangular ring · Piston ring impact: Flank safety device (FS) · Piston ring height: 2 mm · Tolerance group: C
63,00 EUR
Meteor piston 38 mm type D | Sachs 504
Nominal diameter: 38 mm · Manufacturer: Meteor · Ø outside piston (A): 38 mm · Ø piston pin (B): 12 mm · Compression height (C): 28 mm · Curvature (D): 3 mm · Total piston height (E): 53 mm · Number of piston rings (F): 2 pcs · Piston ring mold: Rectangular ring · Piston ring impact: Flank safety device (FS) · Piston ring height: 2 mm · Tolerance group: D
63,00 EUR
Not in stock
GPO piston pin extractor Ø 10, 12, 14 mm
Diameter: 10 mm · Diameter: 12 mm · Diameter: 14 mm · Total length: 130 mm · Width across flats SW: 10 mm · Width across flats SW: 17 mm · Manufacturer: GPO · Area of application: (Dis)assembly tool · Material: Steel · Surface: burnished · Number of components: 7 pcs
22,20 EUR
Moped fans like you also bought:
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Number of components: 2 pcs · Total length: 6 mm · Ø Cable bushing: 1.6 mm · Ø outside: 5 mm · Screw head: Lens head · Drive: Slot · Thread length: 4 mm · Thread type: M4x0.7 (standard thread)
2,25 EUR
Magura adjusting screw brake short
Manufacturer: Magura · Material: Brass · Surface: nickel-plated · Ø shaft: 6.1 mm · Total length: 31 mm · Total length: 40 mm · Drive: Knurled screw · Ø External head: 9.15 mm · Color: silver · Shank length: 6.9 mm · Thread length: 15 mm · Thread type: MF6x0.75 (fine pitch thread)
3,80 EUR
Leonelli 6V voltage regulator (1A quality)
Manufacturer: Leonelli · Material: Aluminum · Material: Plastic · Surface: raw · Tension: 6 V · Type of current: Alternating current (AC) · Performance: 50 W · Total length: 50 mm · Width: 27 mm · Ø mounting hole: 6 mm · Height: 15 mm · Mounting type: Screws
33,40 EUR
VEC electronic ignition coil (replaces ignition coil, capacitor & contact breaker)
Manufacturer: VEC · Hole spacing: 54 mm · Area of application: Original · Area of application: Performance · Area of application: Standard · Color: black · Ø cable holder: 5 mm · Mounting type: Screws · Height: 48 mm · Total length: 77 mm · Cable length: 140 mm · Cable length: 420 mm · Ø Internal flywheel: 90 mm · Place of use: Internal (in the ignition) · Number of fixing points: 2 pcs · Ø mounting hole: 4.6 mm
111,70 EUR
Not in stock