Chromed mudguard mounting for universal use on mopeds, mopeds or small motorcycles with 16 inch rims.
Total length: 305 mm
Dimension center slotted hole - inner edge of strut: 290 mm
Slotted hole dimensions: 14.8 x 10.8 mm
Width of strut inside (at the tire): Approx. 75 mm
Material: Steel, chrome-plated
Minor adjustment work may be necessary to be able to mount this wheel fairing strut on your moped. Therefore, check the dimensions carefully to avoid this.
You can find more struts in the accessories section.
A quality product made in Italy.
Details
| Manufacturer | Made in Italy |
| Material | Steel |
| Total length | 305 mm |
| Surface | chrome-plated |
| Color | Chrome |
| Wheel size [inch] | 16 " |
| Distance mudguard - center hole | 290 mm |
| Wide intake | 75 mm |
| Mounting type | Nuts & bolts |
| Number of fixing points | 5 pcs |
| Ø mounting hole | 10.8 mm, 5.5 mm |
Accessories & related products
GPO front mudguard strut 17" chrome
Manufacturer: GPO · Material: Steel · Outer width: 160 mm · Surface: chrome-plated · Total length: 305 mm · Color: Chrome · Wheel size [inch]: 17 " · Distance mudguard - center hole: 300 mm · Ø mounting hole: 12.5 mm · Mounting type: Nuts & bolts · Number of fixing points: 4 pcs
16,70 EUR
swiing® revival lower front mudguard strut chrome (Version 2.0) | Zündapp Belmondo
Manufacturer: swiing® revival parts · Material: Steel · Total length: 305 mm · Surface: chrome-plated · Color: Chrome · Distance mudguard - center hole: 280 mm · Mounting type: Nuts & bolts · Number of fixing points: 3 pcs · Ø mounting hole: 6.5 mm
40,10 EUR
swiing® revival rear mudguard strut chrome (Version 2.0) | Zündapp Belmondo
Manufacturer: swiing® revival parts · Material: Steel · Total length: 345 mm · Surface: chrome-plated · Color: Chrome · Distance mudguard - center hole: 318 mm · Mounting type: Nuts & bolts · Number of fixing points: 3 pcs · Ø mounting hole: 6.5 mm
40,10 EUR
swiing® revival front mudguard strut 17" chrome
Manufacturer: swiing® revival parts · Material: Steel · Surface: chrome-plated · Wheel size [inch]: 17 " · Distance mudguard - center hole: 300 mm · Ø mounting hole: 7 mm · Ø mounting hole: 13 mm · Number of fixing points: 4 pcs · Total length: 310 mm · Mounting type: Nuts & bolts · Color: Chrome
23,10 EUR
Moped fans like you also bought:
GPO license plate holder Inox
Manufacturer: GPO · Material: Chrome steel (stainless steel) · Height: 5.3 mm · Total length: 145 mm · Color: silver · Ø mounting hole: 5 mm · Width: 105 mm · Thread type: M5x0.8 (standard thread) · Mounting type: Nuts & bolts · Thread length: 8 mm · Hole spacing: 30 mm · Hole spacing: 50 mm · Number of fixing points: 2 pcs
12,20 EUR
Hot 
Leonelli 6V voltage regulator (1A quality)
Manufacturer: Leonelli · Material: Aluminum · Material: Plastic · Surface: raw · Tension: 6 V · Width: 27 mm · Performance: 50 W · Type of current: Alternating current (AC) · Height: 15 mm · Total length: 50 mm · Ø mounting hole: 6 mm · Mounting type: Screws
33,40 EUR
Oil seal NBR 15/30/7 B AS | Sachs 503, 50/2
Simmering type: B - With sheet metal outer casing / one sealing lip. · Manufacturer: Sachs · Material: NBR · Ø inside: 15 mm · Temperature resistance (min.): -30 - 100 °C · Ø outside: 30 mm · Width: 7 mm · Pony spare part no.: A1830 · Sachs spare part no.: 0250 090 000
6,05 EUR
swiing crankshaft standard | Sachs 50/2, 50/3
Manufacturer: swiing® revival parts · Material: Steel · Cheek type: standard · Crankshaft stroke: 42 mm · Connecting rod length center-center: 85 mm · Total length of crankpin on clutch side: 40.6 mm · Total length crankpin ignition side: 63.2 mm · Ø crank webs: 30 mm · Ø piston pin (B): 12 mm · Ø Connecting rod eye: 15 mm · Ø Bearing seat (clutch side): 15 mm · Ø Bearing seat (ignition side): 15 mm · Thread type: MF10x1 (fine pitch thread) · Thread length: 8 mm · Thread length: 11 mm · Dimension needle bearing: 12 / 15 x 14.2 mm (axe 12) · Length 1st paragraph: 18.7 mm · Length 2nd paragraph: 14 mm · Ø 1st step (on the coupling side): 15 mm · Ø 2nd shoulder (on the clutch side): 12 mm · Length of shoulder (ignition side): 34 mm · Weight: 901 g · Number of gears: 1 pcs · Number of gears: 3 pcs · Area of application: Standard · Pony spare part no.: A2565 · Sachs spare part no.: 0286 139 400
127,30 EUR
swiing® revival mudguard holder Inox | Hercules
Manufacturer: swiing® revival parts · Material: Chrome steel (stainless steel) · Outer width: 103 mm · Surface: chrome-plated · Distance mudguard - center hole: 117 mm · Distance mudguard - center hole: 133 mm · Ø mounting hole: 7 mm · Number of fixing points: 7 pcs · Wide intake: 97 mm · Total length: 145 mm · Hole spacing: 16 mm · Color: Chrome
44,60 EUR
Mudguard strut 17" chrome
Manufacturer: Made in Italy · Material: Steel · Surface: chrome-plated · Total length: 325 mm · Color: Chrome · Wheel size [inch]: 17 " · Wide intake: 65 mm · Distance mudguard - center hole: 315 mm · Ø mounting hole: 5.5 mm · Ø mounting hole: 10.8 mm · Hole spacing: 19 mm · Mounting type: Nuts & bolts · Number of fixing points: 5 pcs
14,40 EUR
Collection only possible with online purchase and appointment.
