Original, galvanized pole wheel nut for your moped, moped and small motorcycle.
Fits various crankshafts with the corresponding thread.
You can find more screw nuts in the accessories section.
Good, inexpensive standard spare part. GPO – GOOD PARTS ONLY.
Details
Manufacturer | GPO |
Area of application | Standard |
Material | Steel |
Surface | galvanized (blue) |
Nut type | Flange nut |
Ø outside | 18.8 mm |
Height | 8.9 mm |
Thread type | MF10x1 (fine pitch thread) |
Drive | External hexagon |
Width across flats SW | 14 mm |
Pony OEM number | A4513 |
Sachs OEM no. | 0942 072 102 |
Suitable for the following models
Puch | E50 ZA50 (air-cooled) ZA50 (fan-cooled) Z50 (X30 Sport) Z50 (X30 Velux) 2-speed MS, MV, MV50 3-speed VSD, DS, VZ, MC |
Sachs | 50 (Fahrtwind, 1.25 / 1.5 hp, DE) 502 (Saxonette) - AL, AML 50/2 - L CH (0.8 PS), ML CH (0.8 PS), MB (2.6 PS), MLB (2.6 PS) 50/3 50/4 - MLFB (2.6 PS), LKH (4.5 PS) 50/5 503 - AAL, ABL, 2AL / 2BL, AB, AC, ADV 504 (without pedal shaft) 505 (with pedal shaft) - 1A (AT), 2A (HG) 508 - 1 A 535 |
Tomos | |
Kreidler | Flory MF |
Accessories & related products
GPO flywheel 6V / 17W clockwise (Version 2.0) | Puch E50
Manufacturer: GPO · Material: Plastic · Material: Steel · Tension: 6 V · Performance: 17 W · Direction of rotation: right · Weight: 900 g · Ø cone small inside: 11.5 mm · Ø cone large inside: 15 mm · Cone length: 18.5 mm · Cone ratio: 1:5 · Ø Internal flywheel: 91.1 mm · Ø Flywheel outside: 116.5 mm · Thread type: MF26x1.5 (fine pitch thread) · Thread length: 7 mm · Height: 36.5 mm
101,60 EUR
Bosch flywheel clockwise NOS | Puch E50
Manufacturer: BOSCH · Material: Steel · Direction of rotation: right · Weight: 900 g · Ø cone small inside: 11.9 mm · Ø cone large inside: 15 mm · Cone length: 17.8 mm · Cone ratio: 1:5 · Ø Internal flywheel: 91.2 mm · Ø Flywheel outside: 115.8 mm · Thread type: MF26x1.5 (fine pitch thread) · Thread length: 6.5 mm · Height: 36.6 mm
251,30 EUR
HS-Retro nut M10x1 SW14 flywheel CNC original
Manufacturer: HS-Retro · Material: Steel · Surface: burnished · Nut type: Flange nut · Thread type: MF10x1 (fine pitch thread) · Drive: External hexagon · Width across flats SW: 14 mm · Ø outside: 19.8 mm · Height: 10 mm · Alternative version of the Pony OEM number: A4513 · Alternative version of the Sachs OEM number: 0942 072 102 · Alternative version of the Puch OEM number: 901.2943
10,10 EUR
Moped fans like you also bought:
BERU spark plug connector / 1 kΩ interference suppressed
Manufacturer: BERU · Material: Sheet metal (steel) · Spark plug socket: M4 · Cable available: No · Suppressed: Yes · Color: silver · Resistance: 1000 Ω · Component group Carburetor: Spraying · Ø cable: 5 mm · Ø cable: 7 mm · Pony OEM number: A2099 · Sachs OEM no.: 0265 100 00
10,10 EUR
swiing® revival gasket gearbox cover engine 1 mm | Puch E50
Manufacturer: swiing® revival parts · Material: Sealing paper · Color: sand-colored · Number of components: 1 pcs · Thickness: 1 mm · Ø inside: 106 mm · Ø outside: 116 mm · Number of fixing points: 4 pcs · Alternative version of the Puch OEM number: 349.1.10.349.1
4,50 EUR
VEC electronic ignition coil (replaces ignition coil, capacitor & contact breaker)
Manufacturer: VEC · Place of use: Internal (in the ignition) · Ø Internal flywheel: 90 mm · Area of application: Original · Area of application: Performance · Area of application: Standard · Ø cable holder: 5 mm · Cable length: 140 mm · Cable length: 420 mm · Color: black · Total length: 77 mm · Mounting type: Screws · Number of fixing points: 2 pcs · Ø mounting hole: 4.6 mm · Height: 48 mm · Hole spacing: 54 mm
115,50 EUR
Not in stock