Shaft seal ring 17x30x7 mm for use on your moped / moped with Cilo engine.
The radial shaft seal ring is installed on the crankshaft end.
Ø inner: 17 mm
Ø outer: 30 mm
Width: 7 mm
Material: NBR
Temperature resistant: approx. -30 to +100 °C, briefly up to 120 °C
Type: AS - With rubberized outer casing, one sealing lip and one dust lip.
Details
| Simmering type | AS - With rubberized outer casing / one sealing lip / one dust lip. |
| Ø outside | 24 mm |
| Manufacturer | Cilo |
| Material | NBR |
| Surface | rubberized |
| Ø inside | 15 mm |
| Width | 5 mm |
| Place of use | Crankshaft |
| Temperature resistance (min.) | -30 - 100 °C |
Suitable for the following models
| Cilo | 502 / 502t |
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Area of application: Chemistry · Color: blue · Contents [ml]: 10 ml · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Type of application: 1K · Gap dimension (max.): 0.01 mm · Alignment time: 600 sec · Temperature resistance (min.): -75 - 200 °C · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
25,50 EUR
2.550,00 EUR/l
Oil seal NBR 17/30/7 BS crankshaft | Sachs 50/3, 50/4
Place of use: Crankshaft · Temperature resistance (min.): -30 - 100 °C · Simmering type: BS - With sheet metal outer casing / one sealing lip / one dust lip. · Ø inside: 30 mm · Ø outside: 17 mm · Width: 7 mm · Manufacturer: Sachs · Material: NBR
6,85 EUR
Oil seal NBR 17/30/7 B DUO crankshaft | Sachs 50/3, 50/4
Place of use: Crankshaft · Temperature resistance (min.): -30 - 100 °C · Simmering type: B DUO - With sheet metal outer casing / two sealing lips. · Ø inside: 17 mm · Ø outside: 30 mm · Width: 7 mm · Manufacturer: Sachs · Material: NBR
6,85 EUR
Moped fans like you also bought:
BERU spark plug connector / 1 kΩ interference suppressed
Manufacturer: BERU · Material: Sheet metal (steel) · Spark plug socket: M4 · Cable available: No · Resistance: 1000 Ω · Suppressed: Yes · Ø cable: 5 mm · Ø cable: 7 mm · Color: silver · Pony OEM number: A2099 · Sachs OEM number: 0265 100 00
10,20 EUR
Not so nice 
Chrome luggage rack | Puch Maxi S
Material: Steel · Surface: chrome-plated · Color: Chrome · Wheel size [inch]: 17 " · Total length: 425 mm · Width: 168 mm · Height: 32.5 mm · Mounting type: Nuts & bolts · Number of fixing points: 4 pcs · Ø mounting hole: 8.3 mm · Ø mounting hole: 9 mm · Hole spacing: 29 mm
23,10 EUR
NTN wheel bearing 12/28/8 rear cast hub Leleu | Puch Maxi
Bearing cage: "-" Sheet steel cage ball-guided · Stock number: 6001 · Inner ring width: 12 mm · Manufacturer: NTN · Dust protection type: 2RS - NBR contact seal on both sides · Bearing clearance: CM (special/noise-reduced) · Groove ring: No · Material: Plastic · Area of application: Standard · Material: Steel · Surface: blank · Bearing type: Deep groove ball bearing · Width: 8 mm · Ø inside: 12 mm · Ø outside: 28 mm · Ball bearing closed: Yes
6,85 EUR
Collection only possible with online purchase and appointment.
