Shaft seal ring 22x35x6 mm for use on the gearbox of your Piaggio Ciao C9 moped / moped with splined gearbox (Mono and Vario).
This radial shaft seal ring is installed in the gearbox on the brake pad side.
Ø inner: 22 mm
Ø outer: 35 mm
Width: 6 mm
Material: NBR
Temperature resistant: -30 to +100 °C, briefly up to 120 °C
Type: A - With rubberized outer casing and a sealing lip.
Please note that all Piaggio models after the Ciao C9 with rigid fork no longer had a splined gearbox fitted as standard. For this reason, these transmissions require a 30x20x5 mm oil seal on the brake side.
You can find this oil seal and other parts for your Piaggio transmission in the accessories section.
Quality product from the Italian manufacturer Piaggio in original equipment quality.
Original Piaggio spare part number: 008752
Details
Simmering type | A - With rubberized outer part / one sealing lip. |
Width | 6 mm |
Temperature resistance (min.) | -30 - 100 °C |
Manufacturer | Piaggio |
Material | NBR |
Surface | rubberized |
Ø outside | 35 mm |
Ø inside | 22 mm |
Suitable for the following models
Piaggio | Ciao - Ciao, Ciao, Ciao, Ciao Si Bravo/Superbravo Boxer Grillo |
Accessories & related products
swiing® ingenious triangular bearing plate Racing aluminium red anodized | Piaggio Ciao, SI, Bravo
Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: anodized · Area of application: Racing · Thread type: M10x1.5 (standard thread) · Ø axle: 15 mm · Total length: 13 mm · Number of fixing points: 2 pcs · Thread length: 13 mm · Width: 101 mm · Color: red
42,40 EUR
Oil seal NBR 20/30/5 A gearbox original | Piaggio Ciao, SI, Bravo, Boxer
Temperature resistance (min.): -30 - 100 °C · Simmering type: A - With rubberized outer part / one sealing lip. · Manufacturer: Piaggio · Material: NBR · Surface: rubberized · Ø inside: 20 mm · Ø outside: 30 mm · Width: 5 mm
6,60 EUR
Malossi 75W-90 gear oil 250 ml
Manufacturer: Malossi · Viscosity (SAE): 75W-90 · Oil type: fully synthetic · Contents [ml]: 250 ml · Gearbox type: Automatic machine · Area of application: Gearbox lubrication without clutch · Gearbox type: Mono · Gearbox type: Vario
11,10 EUR
Not in stock
44,40 EUR/l
Moped fans like you also bought:
BERU spark plug connector / 1 kΩ interference suppressed
Manufacturer: BERU · Material: Sheet metal (steel) · Color: silver · Spark plug socket: M4 · Cable available: No · Suppressed: Yes · Resistance: 1000 Ω · Ø cable: 5 mm · Ø cable: 7 mm · Pony spare part no.: A2099 · Sachs spare part no.: 0265 100 00
9,75 EUR
Oil seal NBR 17/25/4 A Gearbox Mono original | Piaggio Ciao, SI, Bravo, Boxer
Temperature resistance (min.): -30 - 100 °C · Simmering type: A - With rubberized outer part / one sealing lip. · Manufacturer: Piaggio · Material: NBR · Surface: rubberized · Ø inside: 17 mm · Ø outside: 25 mm · Width: 4 mm
6,60 EUR
Oil seal NBR 20/30/5 A gearbox original | Piaggio Ciao, SI, Bravo, Boxer
Temperature resistance (min.): -30 - 100 °C · Simmering type: A - With rubberized outer part / one sealing lip. · Manufacturer: Piaggio · Material: NBR · Surface: rubberized · Ø inside: 20 mm · Ø outside: 30 mm · Width: 5 mm
6,60 EUR
CUBE 6202 2RS ball bearing 15/35/11
Bearing cage: "-" Sheet steel cage ball-guided · Stock number: 6202 · Inner ring width: 11 mm · Manufacturer: CUBE · Dust protection type: 2RS - NBR contact seal on both sides · Bearing clearance: CN (standard) · Bearing type: Deep groove ball bearing · Ø inside: 15 mm · Ø outside: 35 mm · Ball bearing closed: Yes · Width: 11 mm
5,25 EUR
CUBE 6202 2RS ball bearing 15/35/11 triangular bearing plate | Piaggio Ciao, SI, Bravo, Grillo
Bearing type: Deep groove ball bearing · Stock number: 6202 · Ø inside: 15 mm · Ø outside: 35 mm · Width: 11 mm · Manufacturer: CUBE · Ball bearing closed: Yes · Dust protection type: 2RS - NBR contact seal on both sides
5,25 EUR