This color set is a remix of the red-transparent paint used by Puch (original item no. 900.0234 / 08).
The red glaze corresponds 100% to the original color.
The set contains 400 ml silver base (reproduced using the original sample) and 400 ml red-transparent P3052T, the mixing ratio of the lasers is 1:0.7 and results in 0.68 l ready for spraying.7 and results in 0.68 l ready to spray.
The mixing ratio for the silver primer is 1:1, which results in 0.8 l.
It is essential to use two-coat thinner (BC thinner / basecoat thinner).
After the moped parts have been prepared as usual, they are painted with the silver primer to cover them. After a flash-off time of approx. 30 minutes, apply two to three even coats of the red glaze. As the amount of glaze applied can change the color tone, it is recommended to create a color sample in advance and then paint the moped using the same system!
Painting with 2-component clearcoat after another 30 minutes is mandatory. However, this is not included in the set.
The set includes the following fixed parts:
Details
| Manufacturer | Puch |
| Contents [ml] | 800 ml |
| Color | red |
Suitable for the following models
| Puch |
Accessories & related products
Moped fans like you also bought:
Motorex engine oil (gear oil) manual 450 ml
Temperature resistance (min.): -30 - 220 °C · Manufacturer: Motorex · Oil type: GL4 · Viscosity (SAE): 80W · Gearbox type: Foot control · Gearbox type: Manual gearshift · Contents [ml]: 450 ml · Area of application: Gearbox lubrication with clutch
11,50 EUR
25,56 EUR/l
Mitas 2.25 x 17" tires MC11 Semi-Slick Whitewall
Manufacturer: Mitas · Tire width [inch]: 2.25 " · Tire width [mm]: 57.15 · Width [inch]: 2 1/4 · Wheel size [inch]: 17 " · Old designation: 21 x 2.25 · Speed index: J = 100 km/h · Load capacity index: 39 = 136 kg · Profile type: MC11 · Tire type: Semi-slick · Color: black · Color: white · White wall: Yes · Tubeless (yes/no): Tubetype TT (requires hose)
75,50 EUR
Tank sticker "PUCH maxi N" 204 x 29 mm | Puch Maxi N
Place of use: Tank (+ frame) · Color: Chrome · Color: black · Color: green · Color: white · Width: 204 mm · Height: 29 mm · Rear side texture: Adhesive · Consistency: UV-resistant · Consistency: petrol resistant · Puch OEM number: 349.2.20.537.0
11,50 EUR
Not in stock
swiing® ingenious wheel axle spoke hub front Ø 29 mm conversion kit with ball bearings | Puch
Surface: galvanized (blue) · Manufacturer: swiing® ingenious parts · Material: Steel · Thread type: MF12x1 (fine pitch thread) · Width across flats SW: 19 mm · Total length: 165 mm · Width: 2.7 mm · Width: 6.6 mm · Width: 11 mm · Width: 35.7 mm · Height: 5.9 mm · Height: 9.9 mm · Ø shaft: 11.95 mm · Ø inside: 12 mm · Ø outside: 29.02 mm · Shank length: 74.5 mm · Ball bearing closed: Yes · Thread length: 40.5 mm · Thread length: 50 mm
45,20 EUR
Collection only possible with online purchase and appointment.
