39.0 mm piston with a rectangular piston ring with internal fuse (IS) suitable for Zündapp Belmondo mopeds, Zündapp Bergsteiger M25/M50 mopeds, as well as Alpa Spezial 3000 or Alpa Black River small motorcycles which have a Zündapp type 247 engine installed.
The detailed dimensions of the piston according to the technical drawing can be found in the details. In addition, you can find out about the relevant piston rings, their stems and locking types on the legend in the pictures.
The piston kit contains piston pins, piston clips and piston rings.
You will find the corresponding assembly tools, piston pin locks and, if necessary, the corresponding cylinder in the accessories section.
Details
| Ø outside piston (A) | 38.955 mm |
| Compression height (C) | 26.3 mm |
| Curvature (D) | 1.3 mm |
| Total piston height (E) | 51.65 mm |
| Number of piston rings (F) | 1 pcs |
| Nominal diameter | 39 mm |
| Piston ring mold | Rectangular ring |
| Ø piston pin (B) | 12 mm |
| Piston ring impact | Internal fuse (IS) |
| Tolerance group | C |
| Weight | 84 g |
Suitable for the following models
| Zündapp Belmondo | |
| Zündapp | 247 Motor |
Accessories & related products
GPO piston pin extractor Ø 10, 12, 14 mm
Manufacturer: GPO · Material: Steel · Area of application: (Dis)assembly tool · Surface: burnished · Diameter: 10 mm · Diameter: 12 mm · Diameter: 14 mm · Total length: 130 mm · Width across flats SW: 10 mm · Width across flats SW: 17 mm · Number of components: 7 pcs
22,20 EUR
Meteor piston pin Ø 12 mm (length: 31 - 40 mm)
Manufacturer: Meteor · Material: Steel · Surface: Hardened · Total length: 31 mm · Total length: 31.5 mm · Total length: 33 mm · Total length: 35.5 mm · Total length: 37 mm · Total length: 38 mm · Total length: 40 mm · Ø piston pin (B): 12 mm · Pony spare part no.: A1112 · Sachs spare part no.: 0216 003 105
7,70 EUR
Moped fans like you also bought:
swiing® revival needle roller bearing 12/15/14.2 original
Bearing type: Needle sleeve · Bearing cage: Sheet steel cage · Manufacturer: swiing® revival parts · Width: 14.2 mm · Ø outside: 15 mm · Ø inside: 12 mm · Dimension needle bearing: 12/15 x 14.2 · Alternative version of the Pony Spare part no.: A4222 · Alternative version of Sachs spare part no.: 0232 155 001 · Tomos spare part no.: 035548
9,95 EUR
17 mm Bing SRF carburetor (replica)
Material: Aluminum · Area of application: Tuning · Carburetor type: SRF · Width: 64 mm · Nominal diameter: 17 mm · Height: 117 mm · Ø Internal connection: 23 mm · Ø Air filter connection: 60 mm · Ø Air filter connection: 64 mm · Mounting type: Plug connection clamped · Ø fuel hose connection: 6 mm · Total length: 78 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M4 · Nozzle block: 2.xx · Clamping screw torque (max.): 3 N/m · Clamping screw torque (max.): 4 N/m
72,50 EUR
17 mm carburetor set (Bing SRF replica) | Zündapp Belmondo
Area of application: Tuning · Carburetor type: SRF · Nominal diameter: 16 mm · Nominal diameter: 17 mm · Hole spacing inlet: 40 mm · Ø Inside entrance: 17 mm · Ø Internal connection: 23 mm · Ø Output inside: 17 mm · Ø Air filter connection: 60 mm · Mounting type: Flange · Mounting type: Plug connection clamped · Ø fuel hose connection: 6 mm · Choke control: Hand choke
122,80 EUR
Collection only possible with online purchase and appointment.
