High-end CNC aluminum transmission cooler for your moped / moped with Puch E50 engine.
Thanks to improved cooling, the clutch works more stress-free. However, this technical miracle also lowers the temperature at the cylinder head.
All components from your original engine can be used, only the cooling fin is fitted in between. Due to the different threads, you have a variety of connection options, such as a temperature sensor.
The following components are included in the scope of delivery:
1x cooling fin, black anodized aluminium
2x seal
1x aluminium bushing
3x O-ring seal
1x hose nozzle
1x circlip / retaining ring
4x countersunk screws hexagon socket M6 x 55 (fastening of cooler / coupling cover)
Details
Width | 32 mm |
Material | Aluminum |
Surface | anodized |
Ø inside | 107 mm |
Ø outside | 150 mm |
Color | black-matt |
Suitable for the following models
Puch | E50 |
Accessories & related products
Moped fans like you also bought:
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Possible lever positions: open / closed / reserve · Material lever: Metal · Filter type: Plastic net · Ø fuel hose connection: 6 mm · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Mounting type: Union nut · Thread type: MF12x1 (fine pitch thread) · Reserve level: 70 mm
11,30 EUR
swiing® ingenious pull-wire starter PVL ignition | Puch E50
Total length: 170 mm · Manufacturer: swiing® ingenious parts · Material: Plastic · Material: Steel · Surface: chrome-plated · Surface: raw · Color: Chrome · Ignition system: PVL · Ø outside: 130 mm · Number of fixing points: 2 pcs · Hole spacing: 138 mm · Height: 80 mm · Width: 150 mm
171,70 EUR
swiing® revival stud bolt set M6 x 106 mm | Puch
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Diameter: 5.9 mm · Thread type: M6x1 (standard thread) · Total length: 106 mm · Thread length: 13 mm · Thread length: 18.5 mm · Width across flats SW: 10 mm · Drive: External hexagon · Alternative version of the Puch OEM number: 360.1.10.034.1
8,50 EUR
PVL ignition coil analog 105458 / 458115
Manufacturer: PVL · Place of use: External (outside the ignition) · Color: black · Mounting type: Screws · Number of fixing points: 2 pcs · Ø mounting hole: 6 mm · Area of application: High End · Area of application: MX · Area of application: Racing · Area of application: Tuning
114,20 EUR
PVL stator "1443" ignition
Manufacturer: PVL · Material: Aluminum · Surface: dull · Color: black · Color: gray · Number of cables: 2 pcs · Number of fixing points: 3 pcs · Area of application: High End · Area of application: MX · Area of application: Performance · Area of application: Racing · Area of application: Tuning
114,20 EUR
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom | Puch Maxi S, N
Possible lever positions: open / closed / reserve · Material lever: Aluminum · Thread type: MF12x1 (fine pitch thread) · Filter type: Plastic net · Ø fuel hose connection: 6 mm · Installation direction: horizontal / horizontal · Outlet direction: below · Mounting type: Union nut · Spare tube shape: curved · Reserve level: 70 mm · Puch OEM number: 349.3.22.030.0 · Puch OEM number: 349.4.22.030.0
11,30 EUR
Polini air filter Big Evo Ø 28/35/42/45/49/55 mm straight wide
Manufacturer: Polini · Camouflaged: No · Color: black · Color: blue · Filter type: Foam · Total length: 140 mm · Width: 150 mm · Height: 100 mm · Ø Internal connection: 28 mm · Ø Internal connection: 35 mm · Ø Internal connection: 42 mm · Ø Internal connection: 45 mm · Ø Internal connection: 49 mm · Ø Internal connection: 55 mm · Mounting type: Plug connection clamped · Area of application: Tuning
68,60 EUR
Not in stock