Hot 
Handmade aluminum side covers for your Sachs 503 Pony Junior, Sachs 503 GT and other Sachs moped / moped models.
The side covers are of the highest quality and are an absolutely worthy alternative to the original side plates that have not been available for a long time.
Every detail is almost perfectly modeled on the original. The covers can either be installed directly or painted.
Dimensions of the side panels:
Total length: 630 mm
Width: 70 mm
Distance of the mounting holes rear - center: 280 mm
Distance of the mounting holes center - front: 210 mm
To avoid any stress cracks or cracks caused by vibrations, the chain sliders should be mounted on rubber (vibration dampers).
Corresponding attachments such as clamping screw, footboard etc. can be found under accessories.
A quality product manufactured in Switzerland.
Details
| Total length | 630 mm |
| Width | 70 mm |
| Manufacturer | Made in Switzerland |
| Material | Aluminum |
| Surface | blank |
| Ø mounting hole | 6 mm |
| Color | silver |
| Height | 145 mm |
| Number of fixing points | 6 pcs |
Suitable for the following models
| Sachs |
Accessories & related products
Hot
Rear light ULO | Sachs, Puch
Test mark: none · Tension: 6 V · Ø Receptacle: 5 mm · Material: Aluminum · Material: Steel · Color: Chrome · Color: red · Bulb holder: E10 · Width: 57 mm · Depth: 55 mm · Height: 90 mm · Battery operated: No · Brake light: No · Reflectors: Yes · Mounting type: Nuts & bolts · Number of fixing points: 2 pcs
67,20 EUR
Not in stock
Moped fans like you also bought:
GPO license plate holder Inox
Manufacturer: GPO · Material: Chrome steel (known as Nirosta®) · Color: silver · Total length: 145 mm · Width: 105 mm · Height: 5.3 mm · Thread type: M5x0.8 (standard thread) · Thread length: 8 mm · Mounting type: Nuts & bolts · Number of fixing points: 2 pcs · Ø mounting hole: 5 mm · Hole spacing: 30 mm · Hole spacing: 50 mm
12,50 EUR
Magura set screw M6x34 mm lock nut SW8
Thread type: M6x1 (standard thread) · Thread length: 24 mm · Total length: 34 mm · Slotted: No · Ø Receptacle: 7.05 mm · Manufacturer: Magura · Ø cable holder: 3.05 mm · Width across flats nut: 8 mm · Width across flats Screw: 8 mm · Material: Brass · Material: Steel · Surface: galvanized (blue) · Surface: nickel-plated
2,85 EUR
swiing® revival wheel axle M10.5x1 x 175 coaster brake galvanized
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Ø shaft: 10.5 mm · Shank length: 95.6 mm · Thread type: MF10.5x1 (fine pitch thread) · Thread length: 34 mm · Thread length: 45 mm · Total length: 175 mm
27,40 EUR
Continental 2.00 - 2.50 x 17" tube
Manufacturer: Continental · Tire width [inch]: 2 - 2.5 " · Tire width [mm]: 50.8 - 63.5 · Width [inch]: 2 · Width [inch]: 2 1/4 · Width [inch]: 2 1/2 · Tire height [%]: 100 · Wheel size [inch]: 17 " · Valve type: TR6 car valve · Old designation: 21 x 2 · Old designation: 21 x 2.25 · Old designation: 21 x 2.5
17,10 EUR
Magura cable clamp Sachs shift/clutch arm
Ø outside: 7 mm · Total length: 11 mm · Drive: External hexagon · Drive: Slot · Screw head: Hexagon · Width across flats SW: 6 mm · Thread type: M4x0.7 (standard thread) · Manufacturer: Magura · Thread length: 7 mm · Ø Cable bushing: 2.8 mm · Ø shaft: 4 mm · Ø Bundle: 7 mm · Number of components: 2 pcs · Material: Brass · Material: Steel · Surface: galvanized (blue) · Surface: nickel-plated
2,85 EUR
Clamps, nipples & set screws set 73 pcs.
Manufacturer: Made in Germany · Material: Brass · Material: Steel · Surface: galvanized (blue) · Surface: nickel-plated · Surface: raw · Drive: External hexagon · Drive: Knurled screw · Drive: Slot · Screw head: Hexagon · Storage method: Plastic box · Dimension storage box: 18.5 x 11.0 x 1.8 cm · Number of components: 73 pcs
68,60 EUR
Collection only possible with online purchase and appointment.
