&p>Transition piece for the Siggnature saddle base and the «Tuck & Roll» genuine leather saddle.
The custom shell «genuine leather» on the accessories in conjunction with the substructure can be easily fitted to your moped, moped and small motorcycle.
The use of these two adapter pieces is necessary because the rear threaded sockets on the saddle are not parallel to the lower surface and the nut would therefore be tightened at an angle.
Ø bore: 8.3 mm (for M8)
Ø outer: 25 mm
Total height: 24 mm
Corresponding attachments such as saddle shell, saddle clamps, substructure etc. can be found in the accessories section.
A kick-ass custom product straight from the Siggnature workshop
.Details
Manufacturer | Siggnature |
Color | black |
Height | 24 mm |
Ø bore | 8 mm |
Ø outside | 25 mm |
Thread size | M8 |
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Temperature resistance (min.): -75 - 200 °C · Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Type of application: 1K · Area of application: Chemistry · Color: blue · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Contents [ml]: 10 ml · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Gap dimension (max.): 0.01 mm · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
24,50 EUR
2.450,00 EUR/l
Cap nut M4 - M10 Inox
Material: Chrome steel (stainless steel) · Nut type: Cap nut · Thread type: M10x1.5 (standard thread) · Thread type: M4x0.7 (standard thread) · Thread type: M5x0.8 (standard thread) · Thread type: M6x1 (standard thread) · Thread type: M7x1 (standard thread) · Thread type: M8x1.25 (standard thread) · Drive: External hexagon
0,90 EUR
66HEROES pointed nut "Bullit" M5 - M12 stainless steel polished
Manufacturer: 66HEROES · Material: Chrome steel (stainless steel) · Nut type: Pointed nut · Drive: External hexagon · Thread type: M10x1.5 (standard thread) · Thread type: M12x1.75 (standard thread) · Thread type: M5x0.8 (standard thread) · Thread type: M6x1 (standard thread) · Thread type: M8x1.25 (standard thread)
7,70 EUR
66HEROES pointed nut "Spike" M5 - M12 Inox
Manufacturer: 66HEROES · Material: Chrome steel (stainless steel) · Nut type: Pointed nut · Drive: External hexagon · Thread type: M10x1.5 (standard thread) · Thread type: M12x1.75 (standard thread) · Thread type: M5x0.8 (standard thread) · Thread type: M6x1 (standard thread) · Thread type: M8x1.25 (standard thread)
7,70 EUR
Moped fans like you also bought:
Handlebar fork plate 30 cm curved black
Manufacturer: Made in Portugal · Material: Steel · Color: black · Surface: varnished · Fork plate holder length: 75 mm · Width: 610 mm · Ø outside: 22 mm · Height: 300 mm · Mounting type: Fork plate · Length handlebar ends: 145 mm · Crossbar: No · Clamping diameter: 22 mm
43,40 EUR
swiing® revival screw set Motor Inox | Puch E50
Manufacturer: swiing® revival parts · Area of application: Standard · Material: Chrome steel (stainless steel) · Surface: blank · Drive: Hexagon socket · Drive: Slot · Screw head: Countersunk head · Screw head: Cylinder head · Puch spare part no.: 900.1216 · Puch spare part no.: 900.1308
22,20 EUR
GUIA egg lamp Ø 13 cm black (with spoiler)
Manufacturer: GUIA · Color: Chrome · Housing material: Sheet metal (steel) · Color: black · Surface: chrome-plated · Surface: varnished · Lens material: Plastic · Bulb holder: BA15d · Ø outside: 130 mm · Number of fixing points: 2 pcs · Depth: 158 mm · Mounting type: screw in (thread) · Switch included: No · Thread size: M6 · Speedometer recording: 60 mm
89,30 EUR