High-quality, non-sparking spark plug connector made of hard plastic for your moped, moped and small motorcycle to ensure the most original or retro look possible.
The spark plug lead is pushed into the spark plug hole. The pointed spike, which is made of brass, is screwed into the plug hole and thus secures the ignition cable and establishes contact.
Since the ignition plug has an M4 thread, the end cap on the ignition plug must be removed.
Cables with a maximum diameter of 7 mm can be used.
If an electronic ignition system (HPI, PVL, Selettra, etc.) is used, a deformable cable should be used.
You will find suitable spark plugs, spark plug leads and alternative spark plug connectors for the spark plug holder in the accessories section.
Details
Ø cable | 7 mm |
Material | Hard plastic, Brass |
Color | black |
Spark plug socket | M4 |
Cable available | No |
Suppressed | No |
Accessories & related products
BERU spark plug connector / 1 kΩ interference suppressed
Manufacturer: BERU · Material: Sheet metal (steel) · Ø cable: 5 mm · Ø cable: 7 mm · Spark plug socket: M4 · Cable available: No · Suppressed: Yes · Resistance: 1000 Ω · Color: silver · Pony spare part no.: A2099 · Sachs spare part no.: 0265 100 00
9,75 EUR
Moped fans like you also bought:
BERU spark plug connector / 1 kΩ interference suppressed
Manufacturer: BERU · Material: Sheet metal (steel) · Ø cable: 5 mm · Ø cable: 7 mm · Spark plug socket: M4 · Cable available: No · Suppressed: Yes · Resistance: 1000 Ω · Color: silver · Pony spare part no.: A2099 · Sachs spare part no.: 0265 100 00
9,75 EUR
swiing® revival condenser with cable | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: swiing® revival parts · Area of application: Original · Area of application: Standard · Capacity: 0.28 µF · Mounting type: Tab for screwing · Connection type: Cable for screwing · Ø outside: 18 mm · Ø mounting hole: 4.4 mm · Height: 26 mm · Piaggio spare part no.: 102939
13,30 EUR
Fuel tap vertical M12x1 (with union nut) outgoing at the bottom
Possible lever positions: open / closed / reserve · Material lever: Plastic · Filter type: Plastic net · Installation direction: vertical / vertical · Outlet direction: below · Spare tube shape: straight · Ø fuel hose connection: 6 mm · Reserve level: 75 mm · Mounting type: Union nut · Thread type: MF12x1 (fine pitch thread)
12,20 EUR