High-quality center kickstand for Piaggio Ciao mopeds / mopeds with 14 mm bolts.
This center kickstand was fitted as standard on the newer PX and C24 models.
The center rod is supplied complete with spring, bolt (Ø14x100 mm) and circlips (fuel rings).
Note: Older spoke wheel models had a 10 mm bolt. However, the hole in the P and SC models was often drilled out so that a spokes with a 14 mm axle can be fitted. Check the dimensions of the bolt before purchasing.
You can find more parts for your Piaggio Ciao as well as the main stem with 10 mm bolt in the accessories section.
A quality product made in Italy.
Original Piaggio spare part number: 25523001
Details
Manufacturer | Made in Italy |
Material | Steel |
Surface | varnished |
Color | black |
Stand base - center mount (A) | 232 mm |
Total width of stand base (B) | 200 mm |
Wide receptacle (C) | 78 mm |
Ø Receptacle (D) | 14 mm |
Wide upright foot (F) | 20 mm |
Total height | 250 mm |
Suitable for the following models
Piaggio | Ciao - PX, C24 |
Accessories & related products
SITO Plus exhaust Ø 24 mm | Piaggio Ciao, Bravo
Manufacturer: SITO · Material: Steel · Surface: varnished · Color: black · Ø outside: 14 mm · Total length: 690 mm · Number of fixing points: 1 pcs · Ø Internal connection: 22 mm · Ø Silencer: 70 mm · Flame tube attachment: Plug connection clamped · Mounting type: Welded lug · Ø Flame tube outside: 24 mm · Exhaust type: Cylindrical
85,80 EUR
Malossi 43 mm cylinder kit 10 mm KoBo new version | Piaggio Ciao, SI, Bravo, Boxer
Nominal diameter: 43 mm · Manufacturer: Malossi · Material: Gray cast iron · Surface: sandblasted · Displacement: 63 ccm · Crankshaft stroke: 43 mm · Ø cylinder neck: 45.6 mm · Ø Outlet outside: 22.5 mm · Ø outlet inside: 18.3 mm · Ø piston pin (B): 10 mm · Outlet type: clamped · Number of fixing points: 3 pcs · Hole pattern [mm]: 55 x 34 · Decompressor: Yes · Camouflaged: No · Area of application: Tuning
165,90 EUR
Main stand 10 mm axle without bolt | Piaggio Ciao P, SC
Manufacturer: Made in Italy · Material: Steel · Surface: varnished · Color: black · Stand base - center mount (A): 230 mm · Total width of stand base (B): 200 mm · Wide receptacle (C): 77 mm · Ø Receptacle (D): 10 mm · Wide upright foot (F): 20 mm · Total height: 250 mm · Piaggio OEM number: 104626
34,20 EUR
Main stand 14 mm axle | Piaggio Ciao PX, C24
Material: Steel · Color: black · Surface: varnished · Stand base - center mount (A): 230 mm · Total width of stand base (B): 210 mm · Wide receptacle (C): 80 mm · Ø Receptacle (D): 14 mm · Wide upright foot (F): 15 mm · Total height: 245 mm · Piaggio OEM number: 25523001
26,20 EUR
Dell'Orto 13/13 SHA carburetor & racing air filter set | Piaggio Ciao PX, C24
Nominal diameter: 13 mm · Manufacturer: Dell'Orto · Manufacturer: Malossi · Component group Carburetor: Carburetor complete · Area of application: Tuning · Carburetor type: SHA (Piaggio) · Width: 60 mm · Choke control: Hand choke · Total length: 46 mm · Nozzle thread: M5x0.8 (standard thread) · Mounting type: Plug connection clamped · Ø without reducing sleeve: 18 mm · Nozzle size: 66 · Ø Inside entrance: 13 mm · Height: 96 mm · Ø Output inside: 13 mm · Ø Air filter connection: 50.8 mm · Ø Internal connection: 16 mm · Ø fuel hose connection: 6 mm
76,60 EUR
Not in stock
Moped fans like you also bought:
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Possible lever positions: open / closed / reserve · Material lever: Metal · Thread type: MF12x1 (fine pitch thread) · Filter type: Plastic net · Mounting type: Union nut · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Ø fuel hose connection: 6 mm · Reserve level: 70 mm
11,30 EUR
Headlight black | Piaggio Ciao PX, C24
Manufacturer: Made in Italy · Test mark: none · Housing material: Plastic · Lens material: Plastic · Color: black · Bulb holder: P26s · Tension: 6 V · Tension: 12 V · Speedometer recording: 48 mm · Switch included: Yes · Battery operated: No · Ø External connection: 6.3 mm · Width: 125 mm · Height: 90 mm · Depth: 147 mm · Mounting type: Screws · Number of fixing points: 2 pcs · Area of application: Original · Area of application: Standard · Piaggio OEM number: 584240
43,40 EUR
Tail light black | Piaggio Ciao PX, C24, Bravo
Manufacturer: Made in Italy · Material: Plastic · Test mark: none · Bulb holder: BA9s · Color: black · Color: red · Number of fixing points: 2 pcs · Height: 58 mm · Mounting type: Nuts & bolts · Depth: 43 mm · Width: 130 mm · Brake light: No · Battery operated: No · Reflectors: Yes
21,60 EUR
GPO control bearing set | Piaggio Ciao
Manufacturer: GPO · Material: Steel · Surface: galvanized (blue) · Color: silver · Bearing type: Bearing ring · Thread type: FG25.4 (1" 24G) · Ø inside: 27 mm · Ø ball [inch] / [mm]: 5/32" (4.00 mm) · Ø mounting frame: 30.05 mm · Ø outside: 41.4 mm · Ø outside: 42 mm · Height: 10.5 mm · Height: 17 mm
21,60 EUR
Cable set black | Piaggio Ciao, SI, Bravo, Boxer
Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Manufacturer: Made in Germany · Material: Steel · Color: black · Quantity: 4 pcs · Outer shell length: 1200 mm · Outer shell length: 1250 mm · Outer shell length: 1300 mm · Outer shell length: 2000 mm · Nipple shape: Ball · Nipple shape: Barrel (transverse) · Nipple shape: Pears · Total length: 1350 mm · Total length: 1600 mm · Total length: 2180 mm
22,80 EUR