Mudguard – strut bolt, with which the mudguard struts were clamped and fastened to the mudguard, especially on old Sachs mopeds and small motorcycles.
Can also be used universally as a mounting clamp.
By tightening the nut, the washer is pushed over the hole and thus clamps the strut.
Total length: 20 mm
Thread length: 10 mm
Thread: M5
Ø strut mount: 5.3 mm
Material: Steel, galvanized
A quality product manufactured in Germany.
Details
Manufacturer | Made in Germany |
Total length | 20 mm |
Material | Steel |
Thread type | M5x0.8 (standard thread) |
Number of components | 3 pcs |
Surface | blue galvanized |
Drive | External hexagon |
Screw head | Hexagon |
Thread length | 10 mm |
Accessories & related products
swiing® revival 17" front fender "Oldie" Inox
Manufacturer: swiing® revival parts · Material: Chrome steel (stainless steel) · Color: Chrome · Surface: polished · Folding the ends: open folded · Shape of the mudguard: partly round · Total length over ends: 555 mm · Scope: 700 mm · Wide mudguard profile: 76 mm · Mounting type: Nuts & bolts · Height of mudguard profile: 29 mm · Total height from support surface to top edge: 184 mm · Wheel size [inch]: 17 "
61,40 EUR
swiing® revival 17" rear fender "Oldie" Inox
Manufacturer: swiing® revival parts · Material: Chrome steel (stainless steel) · Surface: polished · Folding the ends: open folded · Wheel size [inch]: 17 " · Color: Chrome · Shape of the mudguard: partly round · Total length over ends: 620 mm · Scope: 1000 mm · Wide mudguard profile: 76 mm · Height of mudguard profile: 29 mm · Mounting type: Nuts & bolts · Total height from support surface to top edge: 320 mm
87,10 EUR
swiing® revival 19" front mudguard "Oldie" Inox
Manufacturer: swiing® revival parts · Material: Chrome steel (stainless steel) · Surface: polished · Folding the ends: open folded · Wheel size [inch]: 19 " · Color: Chrome · Shape of the mudguard: partly round · Total length over ends: 610 mm · Scope: 800 mm · Wide mudguard profile: 76 mm · Height of mudguard profile: 29 mm · Mounting type: Nuts & bolts · Total height from support surface to top edge: 225 mm
67,00 EUR
swiing® revival 19" rear fender "Oldie" Inox
Manufacturer: swiing® revival parts · Material: Chrome steel (stainless steel) · Surface: polished · Folding the ends: open folded · Wheel size [inch]: 19 " · Color: Chrome · Shape of the mudguard: partly round · Total length over ends: 650 mm · Scope: 1040 mm · Wide mudguard profile: 76 mm · Height of mudguard profile: 29 mm · Mounting type: Nuts & bolts · Total height from support surface to top edge: 335 mm
98,30 EUR
Moped fans like you also bought:
Meteor piston 38 mm | Sachs 50/2, 503 (A2772)
Nominal diameter: 38 mm · Manufacturer: Meteor · Ø outside piston (A): 37.95 mm · Compression height (C): 28 mm · Curvature (D): 3 mm · Total piston height (E): 53 mm · Number of piston rings (F): 2 pcs · Piston ring mold: Rectangular ring · Piston ring impact: Flank safety device (FS) · Piston ring height: 2 mm · Thick piston ring: 1.6 mm · Ø piston pin (B): 12 mm · Weight: 79 g · Pony spare part no.: A2772 · Pony spare part no.: A4358 · Sachs spare part no.: 0286 377 010 · Sachs spare part no.: 0286 378 005
55,80 EUR
swiing® revival engine seal | Sachs 503 AAL, ABL, AB, AC, ADV, 2AL, 2BL (A1884)
Total length: 233 mm · Width: 140 mm · Manufacturer: swiing® revival parts · Number of fixing points: 9 pcs · Material: Sealing paper · Number of components: 1 pcs · Thickness: 0.4 mm · Color: sand-colored · Ø inside: 87 mm · Pony spare part no.: A1884 · Sachs spare part no.: 0250 149 100
6,05 EUR
Magura cable clamp Ø 6 x 9
Total length: 9 mm · Manufacturer: Magura · Material: Chrome steel (stainless steel) · Material: Steel · Surface: blank · Surface: blue galvanized · Number of components: 1 pcs · Area of application: Standard · Thread type: M4x0.7 (standard thread) · Ø Cable bushing: 2.5 mm · Drive: External hexagon · Drive: Slot · Screw head: Hexagon · Ø outside: 6 mm · Thread length: 5 mm · Width across flats SW: 6 mm
2,25 EUR