High-end full-flange crankshaft suitable for manual Sachs 503 2 AL, 2 BL mopeds.
High-quality, precision-fit full-flange crankshaft weighing 1042 grams, which has proven itself in a wide range of load tests.
This crankshaft was designed for use in engines with a large increase in power.
All balancing holes in the cheeks have been sealed with aluminum inserts for maximum pre-compression.
The solid connecting rod is equipped with a more stable Ø 16 mm connecting rod pin, which is hollow on the inside for better balancing.
In addition, the connecting rod bearings are silver bearings, which have excellent emergency running properties.
The high-end crankshaft is designed for Sachs 503 engines and has the correct length of the clutch-side cheek pin, which is 3.5 mm longer than that of the Sachs 50/2 crankshafts currently in circulation.
Dimensions of the crankshaft:
- Total length of the clutch-side crankpin: 43.5 mm
- Total length of crankpin on the clutch side: 63.4 mm
- Length of 1st shoulder (clutch side): 21 mm
- Length 2nd shoulder (clutch side) 13 mm
- Ø 1st shoulder (clutch side): 15 mm
- Ø 2nd heel (clutch side): 12 mm
- Thread (coupling side): MF10x1 mm
- Length of shoulder (on coupling side): 35 mm
- Ø shoulder (on end face): 15 mm
- Thread (on end face): MF10x1 mm
- Ø crank webs: 85 mm
- Width of crank webs: 30.1 mm
- Ø connecting rod eye top: 15 mm
- Ø connecting rod pin bottom: 16 mm
- Length of connecting rod (center-to-center): 85 mm
- Stroke: 42 mm
- Weight (incl. connecting rod): 1042 grams
- Dimension needle bearing: Ø 12 / 15 x 14.2 mm (axe 12)
The needle bearing is included in the scope of delivery.
The matching bearings and oil seals can be found under accessories.
Installation tip:The transition between the crank webs and the crankpin is provided with a slight radius for reinforcement. To ensure clean spacing, a Ø 16 x 1 mm spacer washer should be used on both the left and right-hand sides; these are placed neatly over the chamfer and are therefore perfectly centered. The other spacers can be used normally with Ø 15 mm.
&Revised version of the previously offered crankshaft with additional slotted connecting rod foot for better lubrication, improved balancing ratio and thus better speed stability.
Made by the quality brand swiing – swiss ingenious.
Details
| Manufacturer | swiing |
| Thread type | MF10x1 (fine pitch thread) |
| Thread length | 8 mm, 11 mm |
| Material | Steel, Aluminum |
| Area of application | High End, Tuning, Racing |
| Cheek type | Full cheeks |
| Crankshaft stroke | 42 mm |
| Ø piston pin (B) | 12 mm |
| Connecting rod length center-center | 85 mm |
| Total length of crankpin on clutch side | 43.5 mm |
| Number of gears | 2 pcs |
| Total length crankpin ignition side | 63.4 mm |
| Ø crank webs | 85 mm |
| Ø Connecting rod eye | 15 mm |
| Ø Bearing seat (clutch side) | 15 mm |
| Ø Bearing seat (ignition side) | 15 mm |
| Dimension needle bearing | 12 / 15 x 14.2 mm (axe 12) |
| Wide crank webs | 30.1 mm |
| Length 1st paragraph | 21 mm |
| Length 2nd paragraph | 13 mm |
| Ø 1st step (on the coupling side) | 15 mm |
| Ø 2nd shoulder (on the clutch side) | 12 mm |
| Length of shoulder (ignition side) | 35 mm |
Suitable for the following models
| Sachs | 503 - 2AL / 2BL |
Accessories & related products
swiing® ingenious puller L17 / BO15 / E15 shoulder bearing
Diameter: 24 mm · Diameter: 40.3 mm · Thread type: M6x1 (standard thread) · Thread type: M8x1.25 (standard thread) · Width across flats (trigger): 8 mm · Width across flats (trigger): 19 mm · Span: 24 mm · Manufacturer: swiing® ingenious parts · Clamping depth: 10 mm · Peel-off tray: BO15 · Peel-off tray: E15 · Peel-off tray: L17 · Total length: 120 mm · Area of application: (Dis)assembly tool · Surface: galvanized (blue) · Number of components: 1 pcs
51,00 EUR
Not in stock
swiing® revival shim set | Sachs 503, 502, 50/2, 50/3
Nominal diameter inside: 13 mm · Manufacturer: swiing® revival parts · Ø outside: 18 mm · Ø outside: 21 mm · Material: Steel · Surface: blank / oiled · Ø inside: 12.5 mm · Ø inside: 15.2 mm · Thickness: 0.1 mm · Thickness: 0.15 mm · Thickness: 0.2 mm · Thickness: 0.4 mm · Thickness: 0.45 mm · Thickness: 0.5 mm · Thickness: 1 mm
19,60 EUR
Collection only possible with online purchase and appointment.
