Set consisting of two rustproof replacement springs with original spring force for the standard fork on your Piaggio Ciao moped / moped.
The springs fit as standard on the following model series, which have swing arms with 28 mm mountings:
Ø wire: 4.25 mm
Ø outer spring: 28.4 mm
Ø spring inside: 20 mm
Total length: 110 mm
Number of turns: 14
Material: chrome steel A2, stainless (Nirosta)
Surface: Trowalized
Further wear parts for your fork, alternative products as well as fork springs for the older SC and P models can be found in the accessories section.
Made by the quality brand swiing – swiss ingenious.
Original Piaggio spare part number: 175864
Details
Ø wire | 4.25 mm |
Manufacturer | swiing |
Material | Chrome steel (stainless steel) |
Surface | trowalized |
Color | Chrome |
Ø outside | 28.4 mm |
Ø inside | 20 mm |
Total length | 110 mm |
Suitable for the following models
Piaggio | Ciao - Ciao, Ciao |
Accessories & related products
swiing® revival fork spring Ø 24 mm reinforced Inox | Piaggio Ciao P, SC
Ø inside: 16.25 mm · Ø wire: 4.25 mm · Ø outside: 24.75 mm · Manufacturer: swiing® revival parts · Material: Chrome steel (stainless steel) · Color: Chrome · Surface: electropolished · Total length: 100 mm · Piaggio spare part no.: 113124
15,50 EUR
swiing® ingenious repair kit fork | Piaggio Ciao PX, C24
Ø wire: 4.2 mm · Manufacturer: swiing® ingenious parts · Material: Brass · Material: Chrome steel (stainless steel) · Material: Plastic · Material: Spring steel · Surface: powder-coated · Color: black · Color: white · Color: yellow · Ø inside: 19.6 mm · Ø outside: 28 mm · Total length: 110 mm
72,50 EUR
Not in stock
Fork repair kit (galvanized springs) | Piaggio Ciao
Ø inside: 20 mm · Ø wire: 3.8 mm · Ø outside: 27.4 mm · Material: Plastic · Material: Rubber · Material: Spring steel · Material: Steel · Color: black · Surface: blue galvanized · Surface: powder-coated · Color: silver · Total length: 99 mm
44,60 EUR
Moped fans like you also bought:
swiing® revival gasket set Z50 engine | Puch X30 NS / NL
Manufacturer: swiing® revival parts · Area of application: Standard · Material: Sealing paper · Number of components: 10 pcs · Ø outlet inside: 22 mm · Hole spacing outlet: 42 mm · Hole pattern [mm]: 44 x 44 · Hole spacing inlet: 32 - 38 mm
22,20 EUR
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Possible lever positions: open / closed / reserve · Material lever: Metal · Filter type: Plastic net · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Ø fuel hose connection: 6 mm · Reserve level: 70 mm · Mounting type: Union nut · Thread type: MF12x1 (fine pitch thread)
11,10 EUR
swiing® revival screw M7x35 clamping bridge | Puch
Manufacturer: swiing® revival parts · Area of application: Standard · Material: Steel · Surface: blue galvanized · Number of components: 1 pcs · Total length: 41.6 mm · Screw head: Cylinder head · Drive: Hexagon socket · Ø External head: 10.5 mm · Shank: No · Strength class: 8.8 · Thread length: 34.6 mm · Width across flats SW: 5 mm · Thread type: M7x1 (standard thread)
3,25 EUR
swiing® revival rear brake anchor plate | Puch Maxi N
Manufacturer: swiing® revival parts · Material: Steel · Surface: blue galvanized · Ø axle: 12 mm · Ø shaft: 10 mm · Ø External brake pads: 80 mm · Total length: 135 mm · Ø outside: 92 mm · Ø bore: 12.2 mm · Wide cam holder: 12 mm · Brake lever length (lever length): 68 mm · Ø screw holder: 6.5 mm · Cranking (offset): 10 mm
83,70 EUR
swiing® ingenious axle swing arm set (version 2.0) | Piaggio Ciao
Manufacturer: swiing® ingenious parts · Material: Brass · Material: Chrome steel (stainless steel) · Total length: 50 mm · Ø outside: 16 mm · Ø outside: 22 mm · Ø Bearing inside: 12.85 mm · Drive: External hexagon · Color: gold · Thread length: 22 mm · Thread type: M8x1.25 (standard thread)
33,40 EUR