Centring bushes made of aluminium, red anodized, for clean mounting of the cylinder cover on Puch Maxi S / N, Puch X30 NS / NL, Puch X30 N-2AH mopeds / mopeds.
The bushes can be used on all Puch cylinder heads in conjunction with conventional M6 threaded studs.
They are pushed into the holes in the cylinder cover so that they protrude slightly above the sealing surface (see Figure 2 for illustration).
We recommend that you glue the guide bushes into the cylinder head with Loctite adhesive so that they do not move during assembly/disassembly.
Now the cylinder head can be pushed perfectly centered onto the stud bolts.
You can find the corresponding cylinder heads, stud bolts, cylinder head gaskets, Loctite, etc. in the accessories section.
Exceptional product for the highest demands of the quality brand swiing®.
Details
| Nominal diameter inside | 6 mm |
| Manufacturer | swiing® ingenious parts |
| Material | Aluminum |
| Surface | anodized |
| Total length | 15 mm |
| Ø outside | 7.4 mm |
| Ø inside | 6.25 mm |
Suitable for the following models
| Puch | E50 ZA50 (Fahrtwindgekühlt) Z50 (X30 Sport) |
Accessories & related products
GPO 38 mm cylinder head original | Puch Maxi S, N / X30 NS, NL, N-2AH
Manufacturer: GPO · Material: Aluminum · Surface: sandblasted · Width: 125 mm · Ø cylinder: 38 mm · Total length: 135 mm · Height: 55 mm · Area of application: Standard · Candle thread: short · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 44 · Decompressor: No
38,10 EUR
GPO 45 mm cylinder head tuning Puch Maxi S, N / X30 NS, NL, N-2AH
Manufacturer: GPO · Material: Aluminum · Surface: sandblasted · Width: 125 mm · Ø cylinder: 45 mm · Total length: 135 mm · Height: 55 mm · Area of application: Tuning · Candle thread: short · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 44 · Decompressor: No · Camouflaged: Yes
38,30 EUR
Loctite 638 High-strength adhesive 10 ml
Temperature resistance (min.): -75 - 150 °C · Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Color: green · Contents [ml]: 10 ml · Hazard warning: Causes serious eye damage · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Danger · Hazard pictogram: GHS05 - Corrosive · Hazard pictogram: GHS07 - Caution dangerous · Area of application: Chemistry · Adhesion: high-strength · Type of application: 1K · Gap dimension (max.): 0.25 mm · Alignment time: 300 sec · Breakaway torque (according to material): 23 N/m · Breakaway torque (according to material): 25 N/m · Breakaway torque (according to material): 57 N/m
25,40 EUR
2.540,00 EUR/l
GPO 38 mm cylinder head Puch original (Maxi S, N | X30 NS, NL, N-2AH) black
Manufacturer: GPO · Material: Aluminum · Surface: varnished · Width: 125 mm · Ø cylinder: 38 mm · Total length: 135 mm · Height: 55 mm · Area of application: Original · Number of fixing points: 4 pcs · Decompressor: No
49,70 EUR
GPO 45 mm cylinder head Puch Tuning (Maxi S, N | X30 NS, NL, N-2AH) black
Manufacturer: GPO · Material: Aluminum · Surface: varnished · Width: 125 mm · Ø cylinder: 45 mm · Total length: 135 mm · Height: 55 mm · Area of application: Tuning · Number of fixing points: 4 pcs · Decompressor: No · Camouflaged: Yes
49,70 EUR
Moped fans like you also bought:
GPO 38 mm cylinder head original | Puch Maxi S, N / X30 NS, NL, N-2AH
Manufacturer: GPO · Material: Aluminum · Surface: sandblasted · Width: 125 mm · Ø cylinder: 38 mm · Total length: 135 mm · Height: 55 mm · Area of application: Standard · Candle thread: short · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 44 · Decompressor: No
38,10 EUR
GPO gasket set | Puch E50
Manufacturer: GPO · Material: Aluminum · Material: Fiber · Material: Sealing carton · Material: Sealing paper · Number of components: 7 pcs · Ø outlet inside: 19.9 mm · Area of application: Standard · Hole spacing inlet: 32 - 38 mm · Hole pattern [mm]: 44 x 44 · Hole spacing outlet: 42 mm · Decompressor: Yes
11,50 EUR
swiing® revival stud bolt set M6 x 106 mm | Puch
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Width across flats SW: 10 mm · Total length: 106 mm · Drive: External hexagon · Diameter: 5.9 mm · Thread type: M6x1 (standard thread) · Thread length: 13 mm · Thread length: 18.5 mm · Alternative version of the Puch OEM number: 360.1.10.034.1
8,60 EUR
GPO stud bolt special M6x106 mm galvanized (10.9 strength) | Puch
Manufacturer: GPO · Material: Steel · Surface: galvanized (blue) · Total length: 106 mm · Diameter: 7 mm · Thread type: M6x1 (standard thread) · Strength class: 10.9 · Thread length: 15 mm · Thread length: 19 mm · Alternative version of the Puch OEM number: 360.1.10.034.1
5,00 EUR
Collection only possible with online purchase and appointment.
