The swiing® ingenious EVO racing ignition with light (12 Volt & 60 Watt) is suitable for left- and right-turning engines with 1:5 flywheel cone & 90 mm center plates.
The following special features characterize this ignition:
- From the factory more flywheel mass than HPI ignitions, thus smoother engine idling (382 grams)
- Finely balanced flywheel for less vibration
- Trigger thread with normal M26x1.5 mm pitch, so normal Bosch/Ducati flywheel pullers can be used
- Easy adjustment of the ignition timing
- The stator was designed for high heat loads;designed for high heat loads, no more failures due to overheating
- Optimized ignition curve (adjustment 12° - 14°)
- Light voltage: 12 Volt
- Light output: 60 Watt
- Ø outer flywheel: 75 mm
- Flywheel cone: ratio 1:5 (standard for Puch & Sachs crankshafts)
- Ø outer stator plate: 90 mm
The ignition is compatible with cable starters and fan gears which also fit the HPI, you can find these in the accessories section.
Installation instructions:
- Right-turning engines: Set the piston to TDC, the marking on the base plate at 11 o'clock (left of the swiing logo) must match the marking on the flywheel, this achieves a timing of 2 mm before TDC.
- Left-turning engines: Set the piston to TDC, the marking on the base plate at 13 o'clock (to the right of the swiing logo) must match the marking on the flywheel; this achieves a timing point of 2 mm before TDC.
- Flywheel tightening torque: 37 - 39 Nm (no keyway available)
- The CDI and ignition coil must be supplied with a good earth (grounding), otherwise they can be damaged within a short time.
- The lighting system should also be equipped with a 12 V voltage regulator.
Correct pinning of the Superseal connector:
- 1 = black
- 2 = blue
- 3 = white
Attention: The ignition components stator, rotor, CDI and ignition coil are not compatible with parts of the HPI ignition!
Exceptional product for the highest demands of the quality brand swiing®.
Details
| Manufacturer | swiing® ingenious parts |
Suitable for the following models
| Puch | |
| Sachs | |
| Zündapp Belmondo |
Accessories & related products
GPO flywheel trigger M26x1.5 / M22x1.5 | Puch, Sachs, Beta 521
Width across flats (trigger): 27 mm · Manufacturer: GPO · Clamping depth: 10 mm · Material: Steel · Area of application: (Dis)assembly tool · Surface: blackened · Thread type: MF22x1.5 (fine pitch thread) · Thread type: MF26x1.5 (fine pitch thread) · Total length: 55 mm · Total length: 75 mm · Width across flats Screw: 19 mm · Strength class: 8.8 · Number of components: 1 pcs
11,10 EUR
Hot 
Leonelli 12V voltage regulator (1A quality)
Manufacturer: Leonelli · Material: Aluminum · Material: Plastic · Tension: 12 V · Surface: blue galvanized · Performance: 100 W · Type of current: Alternating current (AC) · Total length: 50 mm · Width: 27 mm · Height: 15 mm · Mounting type: Screws · Ø mounting hole: 6 mm
39,00 EUR
Loctite 243 medium-strength threadlocker 10 ml
Temperature resistance (min.): -75 - 200 °C · Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Type of application: 1K · Area of application: Chemistry · Color: blue · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Contents [ml]: 10 ml · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Gap dimension (max.): 0.01 mm · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
24,50 EUR
2.450,00 EUR/l
swiing® ingenious pull starter EVO & HPI ignition (210) | Puch E50
Manufacturer: swiing® ingenious parts · Color: Chrome · Material: Plastic · Material: Steel · Color: black · Surface: chrome-plated · Surface: raw · Ignition system: HPI · Total length: 160 mm · Width: 135 mm · Height: 93 mm · Ø outside: 130 mm · Number of fixing points: 2 pcs · Hole spacing: 137.5 mm
167,60 EUR
swiing® ingenious EVO ignition coil
Manufacturer: swiing® ingenious parts · Area of application: Tuning · Color: black · Ø cable holder: 7 mm · Total length: 80 mm · Height: 50 mm · Number of fixing points: 2 pcs · Ø mounting hole: 6.5 mm · Mounting type: Nuts & bolts · Hole spacing: 62 mm · Cable length: 480 mm
67,00 EUR
swiing® ingenious 280 g additional weight EVO Inox
Manufacturer: swiing® ingenious parts · Material: Chrome steel (stainless steel) · Area of application: Tuning · Surface: electropolished · Thickness: 12 mm · Ø bolt circle: 48 mm · Ø bolt circle: 54 mm · Ø outside: 95 mm · Ø inside: 39 mm · Number of fixing points: 3 pcs · Weight: 280 g · Ø mounting hole: 6.2 mm
55,80 EUR
Moped fans like you also bought:
BERU spark plug connector / 1 kΩ interference suppressed
Manufacturer: BERU · Material: Sheet metal (steel) · Color: silver · Spark plug socket: M4 · Cable available: No · Suppressed: Yes · Resistance: 1000 Ω · Ø cable: 5 mm · Ø cable: 7 mm · Pony spare part no.: A2099 · Sachs spare part no.: 0265 100 00
9,75 EUR
Motorex Automatic Motor Oil (ATF) 450 ml
Temperature resistance (min.): -45 - 200 °C · Manufacturer: Motorex · Area of application: Gearbox lubrication with clutch · Contents [ml]: 450 ml · Gearbox type: Automatic machine · Pony spare part no.: A2080 · Sachs spare part no.: 0263 014 002
11,10 EUR
24,67 EUR/l
Hot
Leonelli 12V voltage regulator (1A quality)
Manufacturer: Leonelli · Material: Aluminum · Material: Plastic · Tension: 12 V · Surface: blue galvanized · Performance: 100 W · Type of current: Alternating current (AC) · Total length: 50 mm · Width: 27 mm · Height: 15 mm · Mounting type: Screws · Ø mounting hole: 6 mm
39,00 EUR
swiing® ingenious fan wheel black (EVO, HPI, Bosch, Ducati) | Sachs 50/2, 50/3
Ø inside: 39 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Color: black · Surface: anodized · Weight: 116 g · Height: 25 mm · Ø outside: 110 mm · Number of fixing points: 6 pcs · Ø mounting hole: 6 mm · Ø bolt circle: 48 mm · Alternative version of the Pony Spare part no.: A1026 · Alternative version of Sachs spare part no.: 0211 070 105
67,00 EUR
swiing® ingenious fan wheel red (EVO, HPI, Bosch, Ducati) | Puch X30 Velux / Sachs 503 / Belmondo
Ø inside: 39 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Color: red · Surface: anodized · Weight: 87 g · Height: 13.5 mm · Ø outside: 120 mm · Number of fixing points: 10 pcs · Ø mounting hole: 6 mm · Ø bolt circle: 48 mm · Ø bolt circle: 70 mm · Ø bolt circle: 100 mm
69,70 EUR
swiing® ingenious EVO ignition | Sachs 502, 50/2, 50/3, 50/4
Manufacturer: swiing® ingenious parts · Light coil voltage: 12 V · Direction of rotation: any · Tension: 12 V · Performance: 60 W · Ø mounting plate: 90 mm · Mounting type: Screws · Ø Internal flywheel: 63.5 mm · Ø Flywheel outside: 75 mm · Number of fixing points: 3 pcs · Area of application: High End · Area of application: Racing · Area of application: Tuning
335,20 EUR
swiing® ingenious EVO ignition | Puch E50, Z50
Manufacturer: swiing® ingenious parts · Light coil voltage: 12 V · Direction of rotation: any · Tension: 12 V · Performance: 60 W · Ø mounting plate: 90 mm · Mounting type: Screws · Ø Internal flywheel: 63.5 mm · Ø Flywheel outside: 75 mm · Number of fixing points: 3 pcs · Area of application: High End · Area of application: Racing · Area of application: Tuning
279,30 EUR
swiing® ingenious EVO ignition | Sachs 503 AAL, ABL, 2AL, 2 BL
Manufacturer: swiing® ingenious parts · Light coil voltage: 12 V · Direction of rotation: any · Tension: 12 V · Performance: 60 W · Ø mounting plate: 90 mm · Mounting type: Screws · Ø Internal flywheel: 63.5 mm · Ø Flywheel outside: 75 mm · Number of fixing points: 3 pcs · Area of application: High End · Area of application: Racing · Area of application: Tuning
335,20 EUR
Collection only possible with online purchase and appointment.
