44.0 mm Vertex piston with two pieces of 1.5 mm rectangular piston rings with internal locking (IS). The piston set is suitable for the 44 mm swiing tuning cylinder kit for Zündapp Belmondo mopeds, Zündapp Bergsteiger M25/M50 mopeds, as well as Alpa Spezial 3000 and Alpa Black River small motorcycles which have a Zündapp type 247 engine installed.
The Vertex piston is characterized by its high-quality and precise fit.
The detailed dimensioning of the piston according to the technical drawing can be found in the details. You can also find out about the relevant piston rings, their positions and locking types on the legend in the pictures.
The piston kit contains piston pins, piston clips and piston rings.
You will find the appropriate assembly tools, piston pin locks and, if necessary, the corresponding cylinder in the accessories section.
The Vertex piston manufactured for swiing® is characterized by its high-quality and precise fit.
Details
| Manufacturer | swiing® ingenious parts |
| Ø outside piston (A) | 43.95 mm |
| Ø piston pin (B) | 12 mm |
| Compression height (C) | 25.05 mm |
| Curvature (D) | 2.45 mm |
| Total piston height (E) | 51.5 mm |
| Number of piston rings (F) | 2 pcs |
| Nominal diameter | 44 mm |
| Piston ring mold | Rectangular ring |
| Piston ring impact | Internal fuse (IS) |
| Piston ring height | 1.5 mm |
| Piston weight | 92 g |
Suitable for the following models
| Zündapp Belmondo | |
| Zündapp | 247 Motor |
Accessories & related products
GPO piston pin extractor Ø 10, 12, 14 mm
Manufacturer: GPO · Area of application: (Dis)assembly tool · Material: Steel · Surface: burnished · Number of components: 7 pcs · Total length: 130 mm · Diameter: 10 mm · Diameter: 12 mm · Diameter: 14 mm · Width across flats SW: 10 mm · Width across flats SW: 17 mm
23,10 EUR
Moped fans like you also bought:
NTN 6203 C3 Ball bearing 17/40/12
Bearing type: Deep groove ball bearing · Stock number: 6203 · Ø inside: 17 mm · Ø outside: 40 mm · Width: 12 mm · Inner ring width: 12 mm · Manufacturer: NTN · Ball bearing closed: No · Bearing clearance: C3 · Bearing cage: "-" Sheet steel cage ball-guided · Groove ring: No · Material: Steel · Surface: blank · Area of application: Standard
10,30 EUR
Hot 
Leonelli 12V voltage regulator (1A quality)
Manufacturer: Leonelli · Material: Aluminum · Material: Plastic · Surface: galvanized (blue) · Tension: 12 V · Type of current: Alternating current (AC) · Performance: 100 W · Total length: 50 mm · Width: 27 mm · Height: 15 mm · Mounting type: Screws · Ø mounting hole: 6 mm
40,60 EUR
swiing® ingenious 16 mm intake manifold Bing SRF | Zündapp Belmondo (Type 247)
Total height: 42 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Area of application: Tuning · Number of fixing points: 2 pcs · Camouflaged: No · Ø inside: 16 mm · Height flange center hole: 35 mm · Ø External connection: 23 mm · Total length: 35 mm · Mounting type: Screws · Hole spacing inlet: 40 mm
46,40 EUR
Hot
VEC electronic ignition coil (replaces ignition coil, capacitor & contact breaker)
Manufacturer: VEC · Place of use: Internal (in the ignition) · Ø Internal flywheel: 90 mm · Ø cable holder: 5 mm · Cable length: 140 mm · Cable length: 420 mm · Color: black · Total length: 77 mm · Height: 48 mm · Mounting type: Screws · Number of fixing points: 2 pcs · Ø mounting hole: 4.6 mm · Hole spacing: 54 mm · Area of application: Original · Area of application: Performance · Area of application: Standard
116,10 EUR
Not in stock
Collection only possible with online purchase and appointment.
