Special M6 nut with milled 8 mm and 10 mm key width for your moped / moped with wheel hub.
The 2D nut is used to fasten the sprocket to standard wheel hubs where the sprocket is bolted to the wheel hub.
The 2D nuts offer optimum force distribution on the wheel hub thanks to the 8 mm key width. In addition, the sprocket is bombproof on powerful engines thanks to the long thread.
Thread: M6
Height: 12 mm
Wrench width: 8 mm / 10 mm
Material: Steel, galvanized
Alternative fastening material can be found in the accessories section.
Exceptional product for the highest demands of the quality brand swiing®.
Details
| Manufacturer | swiing® ingenious parts |
| Material | Steel |
| Surface | galvanized (blue) |
| Thread type | M6x1 (standard thread) |
| Drive | External hexagon |
| Width across flats SW | 8 mm, 10 mm |
| Height | 12 mm |
Suitable for the following models
| Puch | |
| Sachs | |
| Zündapp Belmondo | |
| Cilo |
Accessories & related products
swiing® revival screw set sprocket mounting galvanized | Puch Maxi
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Color: silver · Thread type: M6x1 (standard thread) · Drive: External hexagon · Screw head: Hexagon · Width across flats SW: 10 mm · Shank: No · Thread length: 22 mm · Strength class: 8.8 · Number of components: 24 pcs
8,85 EUR
swiing® revival screw set sprocket mounting Inox | Puch Maxi
Manufacturer: swiing® revival parts · Material: Chrome steel (stainless steel) · Color: gray · Thread type: M6x1 (standard thread) · Drive: External hexagon · Screw head: Hexagon · Width across flats SW: 10 mm · Shank: No · Thread length: 22 mm · Number of components: 24 pcs
14,40 EUR
swiing® revival special nut M6 SW8 (sprocket ref. back pedal / intake manifold)
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Nut type: Hexagon nut · Thread type: M6x1 (standard thread) · Drive: External hexagon · Width across flats SW: 8 mm · Height: 6 mm
3,25 EUR
swiing® revival screw set for sprocket mounting coaster brake
Manufacturer: swiing® revival parts · Material: Chrome steel (stainless steel) · Material: Steel · Surface: blank · Surface: galvanized (blue) · Color: gray · Thread type: M6x1 (standard thread) · Drive: External hexagon · Screw head: Hexagon · Width across flats SW: 8 mm · Width across flats SW: 10 mm · Shank: No · Thread length: 12 mm · Number of components: 12 pcs
22,20 EUR
swiing® ingenious screw set for sprocket mounting coaster brake racing
Manufacturer: swiing® ingenious parts · Material: Chrome steel (stainless steel) · Material: Steel · Surface: galvanized (blue) · Color: gray · Surface: raw · Color: silver · Thread type: M6x1 (standard thread) · Drive: External hexagon · Screw head: Hexagon · Width across flats SW: 8 mm · Width across flats SW: 10 mm · Shank: No · Thread length: 18 mm · Number of components: 12 pcs
22,20 EUR
Moped fans like you also bought:
GPO license plate holder Inox
Manufacturer: GPO · Material: Chrome steel (stainless steel) · Color: silver · Thread type: M5x0.8 (standard thread) · Total length: 145 mm · Width: 105 mm · Mounting type: Nuts & bolts · Height: 5.3 mm · Number of fixing points: 2 pcs · Thread length: 8 mm · Hole spacing: 30 mm · Hole spacing: 50 mm · Ø mounting hole: 5 mm
12,20 EUR
GPO fork lock | Puch
Material: Brass · Manufacturer: GPO · Material: Spring steel · Material: Steel · Surface: blank · Ø outside: 12 mm · Ø rotating part: 12 mm · Width: 17 mm · Wide locking block: 4.1 mm · Locking block length: 15.3 mm · Total length: 40.8 mm · Length of turned part: 25.6 mm · Ø Pin: 8 mm
11,10 EUR
swiing® revival snap ring low control bearing set (version 2.0)
Manufacturer: swiing® revival parts · Material: Spring steel · Surface: blank · Nominal diameter: 20 mm · Nominal diameter: 28 mm · Thickness: 0.6 mm · Height: 7 mm · Puch spare part no.: 349.1.30.015.1 · Sachs spare part no.: P0521
2,80 EUR
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Area of application: Standard · Material: Steel · Surface: galvanized (blue) · Ø Stranded wire: 1.25 mm · Nipple shape: Cylinder · Cable length: 2200 mm · Number of components: 1 pcs
3,15 EUR
Inner cable Ø 1.2 mm x 200 cm with barrel nipple Ø 6 mm
Ø nipple: 6 mm · Nipple length: 5.5 mm · Manufacturer: Made in Germany · Material: Brass · Area of application: Standard · Material: Steel · Surface: galvanized (blue) · Ø Stranded wire: 1.2 mm · Nipple shape: Barrel (transverse) · Cable length: 2000 mm · Number of components: 1 pcs
3,80 EUR
GPO 17" spoke set incl. nipple (2.9 x 188 mm) Inox
Nipple length: 14 mm · Manufacturer: GPO · Material: Chrome steel (stainless steel) · Surface: raw · Color: silver · Quantity: 36 pcs · Length from hook: 188 mm · Nominal diameter (thread): 3.15 mm · Ø spoke head: 5.35 mm · Ø spoke: 2.9 mm · Ø nipple head: 7.9 mm · Ø Nipple neck: 5 mm · Hook length: 9 mm · Thread length: 11 mm · Hook angle: 95 °
61,40 EUR
Collection only possible with online purchase and appointment.
