Special stud bolt for Sachs 502, 50/2, 50/3, 50/4, 503, 504 mopeds, mopeds and small motorcycles.
The cylinder is optimally guided and centered thanks to the shaft in the middle.
Due to the small key width, the nut can also be easily fitted in hard-to-reach places on the cylinder base.
The increased tensile strength compensates for the difference in thread diameter.
Length: 27 mm
Ø shank: 6.1 mm
Thread: M6 / M5
Thread length: 14 / 10 mm
Strength of stud bolt: 12.9
Exceptional product for the highest demands of the quality brand swiing®.
Details
| Manufacturer | swiing® ingenious parts |
| Material | Steel |
| Surface | burnished |
| Total length | 27 mm |
| Diameter | 6 mm |
| Strength class | 12.9 |
| Thread length | 13 mm, 10 mm |
| Thread type | M6x1 (standard thread), M5x0.8 (standard thread) |
Suitable for the following models
| Universal | |
| Sachs | 50 (Fahrtwind, 1.25 / 1.5 PS, DE) 502 (Saxonette) - AL, AML 50/2 - L CH (0.8 PS), ML CH (0.8 PS), MB (2.6 PS), MLB (2.6 PS) 50/3 50/4 - MLFB (2.6 PS), LKH (4.5 PS) 50/5 503 - AAL, ABL, 2AL / 2BL |
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Area of application: Chemistry · Contents [ml]: 10 ml · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Color: blue · Adhesion: medium strength · Temperature resistance (min.): -75 - 200 °C · Gap dimension (max.): 0.01 mm · Type of application: 1K · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
24,50 EUR
2.450,00 EUR/l
swiing® revival stud bolts M6x38 inlet/outlet galvanized (10.9 strength)
Manufacturer: swiing® revival parts · Material: Steel · Surface: blue galvanized · Total length: 38 mm · Diameter: 5.9 mm · Strength class: 10.9 · Thread length: 11 mm · Thread length: 19 mm · Thread type: M6x1 (standard thread)
2,25 EUR
swiing® revival cylinder base gasket cylinder 0.3 mm | Sachs 503
Ø inside: 45 mm · Nominal diameter: 45 mm · Manufacturer: swiing® revival parts · Material: Oiled paper · Area of application: Standard · Ø cylinder: 38 - 40 mm · Thickness: 0.3 mm · Place of use: Cylinder base · Hole pattern [mm]: 60 x 40
3,80 EUR
Not in stock
swiing set stud bolts M6 / M5 Sachs (12.9 strength) Special
Diameter: 6 mm · Total length: 27.3 mm · Width across flats SW: 8 mm · Manufacturer: swiing · Material: Steel · Surface: blue galvanized · Surface: burnished · Thread type: M5x0.8 (standard thread) · Thread type: M6x1 (standard thread) · Drive: External hexagon · Thread length: 9.5 mm · Thread length: 14 mm · Strength class: 10 · Strength class: 12.9
21,50 EUR
Flange nut M5 galvanized (10 strength)
Material: Steel · Surface: blue galvanized · Nut type: Flange nut · Height: 5 mm · Drive: External hexagon · Strength class: 10 · Width across flats SW: 8 mm · Thread type: M5x0.8 (standard thread) · Pony spare part no.: A1501 · Sachs spare part no.: 0242 024 104
0,90 EUR
Moped fans like you also bought:
Motorex engine oil (gear oil) manual 450 ml
Temperature resistance (min.): -30 - 220 °C · Manufacturer: Motorex · Viscosity (SAE): 80W · Area of application: Gearbox lubrication with clutch · Oil type: GL4 · Contents [ml]: 450 ml · Gearbox type: Foot control · Gearbox type: Manual gearshift
11,10 EUR
24,67 EUR/l
GPO set screws cylinder head galvanized | Sachs 503 / 50/2 / 50/3 / 50/4
Manufacturer: GPO · Area of application: Standard · Material: Steel · Surface: blue galvanized · Color: silver · Thread type: M6x1 (standard thread) · Drive: External hexagon · Total length: 34 mm · Screw head: Hexagon · Shank: Yes · Ø shaft: 5.85 mm · Shank length: 8 mm · Thread length: 22 mm · Width across flats SW: 10 mm · Strength class: 10.9 · Number of components: 12 pcs
5,45 EUR
Screw M6x20 cylinder head Allen key galvanized
Total length: 25.9 mm · Width across flats SW: 5 mm · Material: Steel · Surface: blue galvanized · Thread type: M6x1 (standard thread) · Drive: Hexagon socket · Screw head: Cylinder head · Ø External head: 9.9 mm · Shank: No · Thread length: 20 mm · Strength class: 8.8
1,90 EUR
Collection only possible with online purchase and appointment.
