Montageanleitung
Tuning cylinder for your moped / moped with blown Sachs 503 engines (503 2AL, AAL, 2BL, ABL CH).
This 40 mm racing cylinder is visually indistinguishable from the original cylinder when fitted.
The following details have been adapted for this cylinder:
- The intake window has been enlarged to achieve better timing and greater intake volume
- Lubrication holes on the piston to the piston pin
- The inner surfaces on the piston have been milled flat for clean guidance of the connecting rod bearing
- The piston skirt has been optimized
- Larger and stricter piston skirt;
- the intake angles of the exhaust ports have been adjusted
- the angle and proportions of the exhaust port have been adjusted
The racing kit has good power delivery in both the lower and upper rev ranges due to the high torque.The entire cylinder is made of high-quality cast aluminum. The running surface is provided with a Nikasil coating. This results in smooth running, optimum heat dissipation and a long service life.
All sealing and connection surfaces have been precisely machined flat. The threaded stud bolts supplied are used to attach the cylinder head (4 M6x36) and intake manifold (2 M6x27). Threaded holes in aluminum do not tolerate repeated assembly and disassembly. Therefore, the stud bolts should be firmly glued into the cylinder with Loctite.
To get the full power out of the tuning cylinder, we recommend installing the tuning add-on parts specially developed for this cylinder.spark plug
Swiing recommends using semi-synthetic 2-stroke &oum;l for the running-in process. In addition, the cylinder kit comes with detailed installation instructions and instructions for use.
Caution:
For Sachs 503 ABL engines, the engine housing must be ground out slightly in the area of the cylinder neck.
Optionally with or without cylinder head.
Exceptional product for the highest demands of the quality brand swiing®.
Sorry, we messed up! The cylinder kit is completely sold out and therefore cannot be ordered. It will be reworked so that you can look forward to an even better and stronger cylinder if the tuning goods are kind to us.
Thank you very much for your patience.
The set includes the following fixed parts:
Details
| Manufacturer | swiing® ingenious parts |
| Material | Aluminum |
| Surface | sandblasted |
| Displacement | 55 ccm |
| Crankshaft stroke | 42 mm |
| Nominal diameter | 40 mm |
| Ø piston pin (B) | 12 mm |
| Thread inlet | M6x1 (standard thread) |
| Number of fixing points | 4 pcs |
| Area of application | Tuning |
| Hole spacing inlet | 32 mm |
| Outlet type | clamped |
| Hole pattern [mm] | 60 x 40 / 37 x 37 |
| Decompressor | No |
| Camouflaged | No |
Suitable for the following models
| Sachs | 503 - AAL, ABL, 2AL / 2BL |
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Temperature resistance (min.): -75 - 200 °C · Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Color: blue · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Contents [ml]: 10 ml · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Area of application: Chemistry · Adhesion: medium strength · Gap dimension (max.): 0.01 mm · Type of application: 1K · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
25,50 EUR
2.550,00 EUR/l
swiing® ingenious piston 40 mm | Sachs 503
Manufacturer: swiing® ingenious parts · Nominal diameter: 40 mm · Thick piston ring: 1.7 mm · Ø outside piston (A): 39.97 mm · Ø piston pin (B): 12 mm · Compression height (C): 28 mm · Curvature (D): 3.5 mm · Total piston height (E): 54 mm · Number of piston rings (F): 2 pcs · Piston ring impact: Internal fuse (IS) · Piston ring mold: Rectangular ring · Piston ring height: 1.5 mm · Piston weight: 83 g
63,80 EUR
swiing® ingenious tuning set 40 mm | Sachs 503 (fan-cooled)
Nominal diameter: 40 mm · Manufacturer: GPO · Manufacturer: NGK · Manufacturer: swiing® ingenious parts · Displacement: 55 ccm · Crankshaft stroke: 42 mm · Hole spacing inlet: 32 mm · Ø piston pin (B): 12 mm · Outlet type: clamped · Hole pattern [mm]: 60 x 40 · Decompressor: No · Camouflaged: No · Area of application: Tuning
528,80 EUR
Not in stock
Hot 
swiing racing exhaust 28 mm blank | Sachs 503
Manufacturer: swiing · Material: Aluminum · Material: Steel · Surface: varnished · Ø outside: 77 mm · Total length: 850 mm · Color: graphite colors · Color: silver · Ø Silencer: 60 mm · Ø Internal connection: 26 mm · Ø Flame tube outside: 28 mm · Exhaust type: Cone / double cone · Mounting type: Welded lug · Number of fixing points: 1 pcs · Flame tube attachment: Plug connection clamped
98,70 EUR
swiing racing exhaust 28 mm chrome | Sachs 503
Manufacturer: swiing · Material: Aluminum · Material: Steel · Surface: chrome-plated · Ø outside: 77 mm · Total length: 850 mm · Color: Chrome · Color: silver · Ø Silencer: 60 mm · Ø Internal connection: 26 mm · Ø Flame tube outside: 28 mm · Exhaust type: Cone / double cone · Mounting type: Welded lug · Number of fixing points: 1 pcs · Flame tube attachment: Plug connection clamped
116,10 EUR
Hot
swiing racing exhaust 28 mm black | Sachs 503
Manufacturer: swiing · Material: Aluminum · Material: Steel · Surface: varnished · Ø outside: 77 mm · Total length: 850 mm · Color: black · Ø Silencer: 60 mm · Ø Internal connection: 26 mm · Ø Flame tube outside: 28 mm · Exhaust type: Cone / double cone · Mounting type: Welded lug · Number of fixing points: 1 pcs · Flame tube attachment: Plug connection clamped
102,20 EUR
Collection only possible with online purchase and appointment.
